Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Sat, 1 Dec 2018 10:32:31 -0800
From:   Guenter Roeck <linux@roeck-us.net>
To:     Corentin Labbe <clabbe@baylibre.com>
Cc:     jdelvare@suse.com, linux-hwmon@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] hwmon: fix typo build -> built
Message-ID: <20181201183231.GA14451@roeck-us.net>
References: <1543522155-17406-1-git-send-email-clabbe@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1543522155-17406-1-git-send-email-clabbe@baylibre.com>
User-Agent: Mutt/1.5.24 (2015-08-30)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, Nov 29, 2018 at 08:09:14PM +0000, Corentin Labbe wrote:
> This patch fix a typo where build is used instead of built.
> 
> Signed-off-by: Corentin Labbe <clabbe@baylibre.com>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  drivers/hwmon/Kconfig | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 532a0532d01b..100b7fce1412 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -179,7 +179,7 @@ config SENSORS_ADT7X10
>  	  This module contains common code shared by the ADT7310/ADT7320 and
>  	  ADT7410/ADT7420 temperature monitoring chip drivers.
>  
> -	  If build as a module, the module will be called adt7x10.
> +	  If built as a module, the module will be called adt7x10.
>  
>  config SENSORS_ADT7310
>  	tristate "Analog Devices ADT7310/ADT7320"
> @@ -242,7 +242,7 @@ config SENSORS_ADT7475
>  	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
>  	  chips.
>  
> -	  This driver can also be build as a module.  If so, the module
> +	  This driver can also be built as a module.  If so, the module
>  	  will be called adt7475.
>  
>  config SENSORS_ASC7621
> @@ -666,7 +666,7 @@ config SENSORS_JZ4740
>  	  If you say yes here you get support for reading adc values from the ADCIN
>  	  pin on Ingenic JZ4740 SoC based boards.
>  
> -	  This driver can also be build as a module. If so, the module will be
> +	  This driver can also be built as a module. If so, the module will be
>  	  called jz4740-hwmon.
>  
>  config SENSORS_JC42
> @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
>  	  If you say yes here you get support for the Texas Instruments
>  	  AMC6821 hardware monitoring chips.
>  
> -	  This driver can also be build as a module.  If so, the module
> +	  This driver can also be built as a module.  If so, the module
>  	  will be called amc6821.
>  
>  config SENSORS_INA209