Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Mon, 3 Dec 2018 10:33:33 +0100
From:   Lukasz Majewski <lukma@denx.de>
To:     Shawn Guo <shawnguo@kernel.org>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        Stefan Agner <stefan@agner.ch>,
        Fabio Estevam <festevam@gmail.com>,
        Fabio Estevam <fabio.estevam@nxp.com>
Subject: Re: [PATCH] ARM: dts: Provide support for reading ID code from MVB
 device (BK4)
Message-ID: <20181203103333.111c2463@jawa>
In-Reply-To: <20181126143619.GB31334@dragon>
References: <20181113121213.14296-1-lukma@denx.de>
        <20181126143619.GB31334@dragon>
Organization: denx.de
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha256;
 boundary="Sig_/4OQ7RAQWdTkk1qF09dh+./Q"; protocol="application/pgp-signature"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

--Sig_/4OQ7RAQWdTkk1qF09dh+./Q
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

Hi Shawn,

Thank you for the review.

> On Tue, Nov 13, 2018 at 01:12:13PM +0100, Lukasz Majewski wrote:
> > The procedure to read this ID value is as follows:
> >=20
> > rmmod spi_fsl_dspi
> > insmod spi-gpio.ko
> >=20
> > echo 504 > /sys/class/gpio/export
> > cat /sys/class/gpio/gpio504/value
> > ...
> > echo 511 > /sys/class/gpio/export
> > cat /sys/class/gpio/gpio511/value
> >=20
> > rmmod spi-gpio.ko
> > insmod spi_fsl_dspi
> >=20
> > Signed-off-by: Lukasz Majewski <lukma@denx.de>
>=20
> A prefix like 'ARM: dts: vf610-bk4: ...' might be better.

Ok.

>=20
> > ---
> >  arch/arm/boot/dts/vf610-bk4.dts | 31
> > +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
> >=20
> > diff --git a/arch/arm/boot/dts/vf610-bk4.dts
> > b/arch/arm/boot/dts/vf610-bk4.dts index cab95714c058..f01c735807ae
> > 100644 --- a/arch/arm/boot/dts/vf610-bk4.dts
> > +++ b/arch/arm/boot/dts/vf610-bk4.dts
> > @@ -59,6 +59,29 @@
> >  		regulator-min-microvolt =3D <3300000>;
> >  		regulator-max-microvolt =3D <3300000>;
> >  	};
> > +
> > +	spi_gpio {
>=20
> We recommend hyphen rather than underscore be used in node name.

Ok. I will change it to spi-gpio

>=20
> > +		compatible =3D "spi-gpio";
> > +		pinctrl-0 =3D <&pinctrl_gpio_spi>;
> > +		pinctrl-names =3D "default";
> > +		#address-cells =3D <1>;
> > +		#size-cells =3D <0>;
> > +		/* PTD12 ->RPIO[91] */
> > +		sck-gpios  =3D <&gpio2 27 GPIO_ACTIVE_LOW>;
> > +		/* PTD10 ->RPIO[89] */
> > +		miso-gpios =3D <&gpio2 25 GPIO_ACTIVE_HIGH>;
> > +		num-chipselects =3D <0>;
> > +
> > +		72xx165@0 {
>=20
> Please use a generic name for the node.

This is a bit tricky.

Other DTS definitions for this compatible:

sn65hvs882: sn65hvs882@0 {
	compatible =3D "pisosr-gpio";
	...
	}

They use the exact used IC name - sn65hvs882, which IMHO is the way how
this node shall be described.

The reason is that the compatible is "pisosr-gpio" -> parallel input
serial output shift regsiter - gpio.

By adding the exact name of connected electronic IC - sn65hvs882 and in
my case IC from the 72xx165 family provides good description of the HW.

Maybe you have other idea how to provide the name of the IC connected?

>=20
> Shawn
>=20
> > +			compatible =3D "pisosr-gpio";
> > +			reg =3D <0>;
> > +			gpio-controller;
> > +			#gpio-cells =3D <2>;
> > +			/* PTB18 -> RGPIO[40] */
> > +			load-gpios  =3D <&gpio1 8 GPIO_ACTIVE_LOW>;
> > +			spi-max-frequency =3D <100000>;
> > +		};
> > +	};
> >  };
> > =20
> >  &adc0 {
> > @@ -430,6 +453,14 @@
> >  		>;
> >  	};
> > =20
> > +	pinctrl_gpio_spi: pinctrl-gpio-spi {
> > +		fsl,pins =3D <
> > +			VF610_PAD_PTB18__GPIO_40        0x1183
> > +			VF610_PAD_PTD10__GPIO_89        0x1183
> > +			VF610_PAD_PTD12__GPIO_91        0x1183
> > +		>;
> > +	};
> > +
> >  	pinctrl_i2c2: i2c2grp {
> >  		fsl,pins =3D <
> >  			VF610_PAD_PTA22__I2C2_SCL
> > 0x34df --=20
> > 2.11.0
> >=20


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de

--Sig_/4OQ7RAQWdTkk1qF09dh+./Q
Content-Type: application/pgp-signature
Content-Description: OpenPGP digital signature

-----BEGIN PGP SIGNATURE-----

iQEzBAEBCAAdFiEEgAyFJ+N6uu6+XupJAR8vZIA0zr0FAlwE+G4ACgkQAR8vZIA0
zr2v4gf+JOffL084LxwKXmYrHWohgLSaKYfGDIF/vVmqycfG1bzJIogeI73uM0bY
/9FtgeXd0P0IwRG8ugltg94fEN9itfWDeEHDt0TNvaSdcX0BNM1swp2JHNjINX/P
MdhHOj+geabFXHMahcu7Q5Pchr2u8Jfn0/7hMND9mY5bH5zqFiKlUSuNVuCacBaF
qHPp3TcXvFYnoo0nUKvPhnESvIGoxRHwZE99zpfeiFR15eLvvI5MSTYwsEd3nDNa
Zk78dT0tF3jpskE9bjsJSTXCFkbZuzIbFxHrgKSMCyoBhZZzkHZ91CqoSsLzKA+e
HMbXE1D9sjxiCtP2jBGJzUJKwj+DDA==
=85Ok
-----END PGP SIGNATURE-----

--Sig_/4OQ7RAQWdTkk1qF09dh+./Q--