Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   <qii.wang@mediatek.com>
To:     <wsa@the-dreams.de>
CC:     <linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        <linux-mediatek@lists.infradead.org>,
        <srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
        <qii.wang@mediatek.com>, <ryder.lee@mediatek.com>
Subject: [PATCH 2/5] i2c: mediatek: remove useless code and replace definitions
Date:   Mon, 3 Dec 2018 21:32:51 +0800
Message-ID: <1543843974-4054-3-git-send-email-qii.wang@mediatek.com>
In-Reply-To: <1543843974-4054-1-git-send-email-qii.wang@mediatek.com>
References: <1543843974-4054-1-git-send-email-qii.wang@mediatek.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: qii wang <qii.wang@mediatek.com>

Completion_done is useless when we don't use its return value,
so we remove it. Different speeds have been defined by macros,
so we use macros definitions.

Signed-off-by: qii wang <qii.wang@mediatek.com>
---
 drivers/i2c/busses/i2c-mt65xx.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index a74ef76..660de1e 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -456,7 +456,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 
 	control_reg = readw(i2c->base + OFFSET_CONTROL) &
 			~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
-	if ((i2c->speed_hz > 400000) || (left_num >= 1))
+	if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1))
 		control_reg |= I2C_CONTROL_RS;
 
 	if (i2c->op == I2C_MASTER_WRRD)
@@ -465,7 +465,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	writew(control_reg, i2c->base + OFFSET_CONTROL);
 
 	/* set start condition */
-	if (i2c->speed_hz <= 100000)
+	if (i2c->speed_hz <= I2C_DEFAULT_SPEED)
 		writew(I2C_ST_START_CON, i2c->base + OFFSET_EXT_CONF);
 	else
 		writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF);
@@ -642,8 +642,6 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 		return -ETIMEDOUT;
 	}
 
-	completion_done(&i2c->msg_complete);
-
 	if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
 		dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
 		mtk_i2c_init_hw(i2c);
-- 
1.7.9.5