Return-Path: <linux-kernel-owner+willy=40w.ods.org@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S263325AbUASUel (ORCPT <rfc822;willy@w.ods.org>);
	Mon, 19 Jan 2004 15:34:41 -0500
Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262765AbUASUel
	(ORCPT <rfc822;linux-kernel-outgoing>);
	Mon, 19 Jan 2004 15:34:41 -0500
Received: from 66-95-121-230.client.dsl.net ([66.95.121.230]:35969 "EHLO
	mail.lig.net") by vger.kernel.org with ESMTP id S263468AbUASUbc
	(ORCPT <rfc822;linux-kernel@vger.kernel.org>);
	Mon, 19 Jan 2004 15:31:32 -0500
Message-ID: <400C3EA8.20009@lig.net>
Date: Mon, 19 Jan 2004 15:31:36 -0500
From: "Stephen D. Williams" <sdw@lig.net>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.6b) Gecko/20031208
X-Accept-Language: en-us, en
MIME-Version: 1.0
To: Jan Mynarik <mynarikj@phoenix.inf.upol.cz>
Cc: linux-kernel@vger.kernel.org, andre@linux-ide.org
Subject: Re: DMA timeout error and then kernel halted
References: <1074533362.7913.14.camel@narsil>
In-Reply-To: <1074533362.7913.14.camel@narsil>
Content-Type: multipart/mixed;
 boundary="------------010802030109060208050702"
Sender: linux-kernel-owner@vger.kernel.org
X-Mailing-List: linux-kernel@vger.kernel.org
Content-Length: 44385
Lines: 1642

This is a multi-part message in MIME format.
--------------010802030109060208050702
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

I'm having similar problems with a WD 200GB and 2.6.1, VIA chipset, 1.7 
Celeron processor, 3GB ECC ram.  The same thing was happening when the 
drive was on a Promise 100MB IDE controller (not raid, the simple IDE 
controllers), but it also happened when I removed that card and ran all 
three drives on the motherboard IDEs.

On the next occurrance, I will run with noacpi, and after that without 
DMA.  The kernel found no APIC hardware.

I'm also having smilar problems on another system with the stock SuSE9 
kernel 2.4.21 and Maxtor 160GB drives.

sdw

Jan Mynarik wrote:

>Hi,
>
>I have DMA problems with HPT366 on BP6 (newest BIOS version RU incl.
>1.28 BIOS for HPT366) and Seagate's 80 GB disk (please see exact model
>numbers in attached dmesg).
>
>It's reproducible (with or without SMP, various kernel versions,
>overclocking or not, ACPI on and off) on 2.4.22 and 2.6.0 (test9, test11
>and vanilla) and 2.6.1-rc3. On 2.4 kernel it doesn't halt kernel.
>
>Problem description:
>When I try to set DMA by hdparm, after several seconds the HDD led gets
>on and remains on for another amount of seconds, then I got
>
>hde: dma_timer_expiry: dma status == 0x21
>
>and after a while
>
>hde: DMA timeout error
>
>then kernel is halted and I need to reset my PC.
>
>
>After some investigations I realized that the problem could be in the
>combination of HPT366 and Seagate disk. In the source code of
>HighPoint's driver
>(http://www.highpoint-tech.com/hpt3xx-opensource-v131.tgz - link is in
>kernel's drivers/ide/pci/hpt366.c) I can see some function
>(seagate_hdd_fix) used to fix
>some seagate disk initialization problem which is not present in
>hpt366.c in kernel. I think that's the problem because I
>haven't found any reported problem and I think that BP6 is still widely
>used.
>
>Is it known? Any patches, workarounds, or other suggestions?
>
>Regards,
>
>Jan "Pogo" Mynarik
>
>  
>
>------------------------------------------------------------------------
>
>#
># Automatically generated make config: don't edit
>#
>CONFIG_X86=y
>CONFIG_MMU=y
>CONFIG_UID16=y
>CONFIG_GENERIC_ISA_DMA=y
>
>#
># Code maturity level options
>#
>CONFIG_EXPERIMENTAL=y
>CONFIG_CLEAN_COMPILE=y
>CONFIG_STANDALONE=y
>
>#
># General setup
>#
>CONFIG_SWAP=y
>CONFIG_SYSVIPC=y
>CONFIG_BSD_PROCESS_ACCT=y
>CONFIG_SYSCTL=y
>CONFIG_LOG_BUF_SHIFT=15
># CONFIG_IKCONFIG is not set
># CONFIG_EMBEDDED is not set
>CONFIG_KALLSYMS=y
>CONFIG_FUTEX=y
>CONFIG_EPOLL=y
># CONFIG_OPTIMISE_SIZE is not set
>CONFIG_IOSCHED_NOOP=y
>CONFIG_IOSCHED_AS=y
>CONFIG_IOSCHED_DEADLINE=y
># CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
>
>#
># Loadable module support
>#
>CONFIG_MODULES=y
>CONFIG_MODULE_UNLOAD=y
>CONFIG_MODULE_FORCE_UNLOAD=y
>CONFIG_OBSOLETE_MODPARM=y
>CONFIG_MODVERSIONS=y
>CONFIG_KMOD=y
>
>#
># Processor type and features
>#
>CONFIG_X86_PC=y
># CONFIG_X86_VOYAGER is not set
># CONFIG_X86_NUMAQ is not set
># CONFIG_X86_SUMMIT is not set
># CONFIG_X86_BIGSMP is not set
># CONFIG_X86_VISWS is not set
># CONFIG_X86_GENERICARCH is not set
># CONFIG_X86_ES7000 is not set
># CONFIG_M386 is not set
># CONFIG_M486 is not set
># CONFIG_M586 is not set
># CONFIG_M586TSC is not set
># CONFIG_M586MMX is not set
># CONFIG_M686 is not set
>CONFIG_MPENTIUMII=y
># CONFIG_MPENTIUMIII is not set
># CONFIG_MPENTIUM4 is not set
># CONFIG_MK6 is not set
># CONFIG_MK7 is not set
># CONFIG_MK8 is not set
># CONFIG_MELAN is not set
># CONFIG_MCRUSOE is not set
># CONFIG_MWINCHIPC6 is not set
># CONFIG_MWINCHIP2 is not set
># CONFIG_MWINCHIP3D is not set
># CONFIG_MCYRIXIII is not set
># CONFIG_MVIAC3_2 is not set
># CONFIG_X86_GENERIC is not set
># CONFIG_X86_EMU486 is not set
>CONFIG_X86_CMPXCHG=y
>CONFIG_X86_XADD=y
>CONFIG_X86_L1_CACHE_SHIFT=5
>CONFIG_RWSEM_XCHGADD_ALGORITHM=y
>CONFIG_X86_WP_WORKS_OK=y
>CONFIG_X86_INVLPG=y
>CONFIG_X86_BSWAP=y
>CONFIG_X86_POPAD_OK=y
>CONFIG_X86_GOOD_APIC=y
>CONFIG_X86_INTEL_USERCOPY=y
>CONFIG_X86_USE_PPRO_CHECKSUM=y
># CONFIG_HPET_TIMER is not set
># CONFIG_HPET_EMULATE_RTC is not set
>CONFIG_SMP=y
>CONFIG_NR_CPUS=2
>CONFIG_PREEMPT=y
>CONFIG_X86_LOCAL_APIC=y
>CONFIG_X86_IO_APIC=y
>CONFIG_X86_TSC=y
>CONFIG_X86_MCE=y
># CONFIG_X86_MCE_NONFATAL is not set
># CONFIG_X86_MCE_P4THERMAL is not set
># CONFIG_TOSHIBA is not set
># CONFIG_I8K is not set
># CONFIG_MICROCODE is not set
># CONFIG_X86_MSR is not set
># CONFIG_X86_CPUID is not set
># CONFIG_EDD is not set
>CONFIG_NOHIGHMEM=y
># CONFIG_HIGHMEM4G is not set
># CONFIG_HIGHMEM64G is not set
># CONFIG_MATH_EMULATION is not set
>CONFIG_MTRR=y
># CONFIG_EFI is not set
>CONFIG_HAVE_DEC_LOCK=y
>
>#
># Power management options (ACPI, APM)
>#
>CONFIG_PM=y
># CONFIG_SOFTWARE_SUSPEND is not set
># CONFIG_PM_DISK is not set
>
>#
># ACPI (Advanced Configuration and Power Interface) Support
>#
>CONFIG_ACPI=y
>CONFIG_ACPI_BOOT=y
>CONFIG_ACPI_INTERPRETER=y
>CONFIG_ACPI_SLEEP=y
>CONFIG_ACPI_SLEEP_PROC_FS=y
>CONFIG_ACPI_AC=m
>CONFIG_ACPI_BATTERY=m
>CONFIG_ACPI_BUTTON=m
>CONFIG_ACPI_FAN=m
>CONFIG_ACPI_PROCESSOR=m
>CONFIG_ACPI_THERMAL=m
>CONFIG_ACPI_ASUS=m
>CONFIG_ACPI_TOSHIBA=m
># CONFIG_ACPI_DEBUG is not set
>CONFIG_ACPI_BUS=y
>CONFIG_ACPI_EC=y
>CONFIG_ACPI_POWER=y
>CONFIG_ACPI_PCI=y
>CONFIG_ACPI_SYSTEM=y
>CONFIG_ACPI_RELAXED_AML=y
>
>#
># APM (Advanced Power Management) BIOS Support
>#
># CONFIG_APM is not set
>
>#
># CPU Frequency scaling
>#
># CONFIG_CPU_FREQ is not set
>
>#
># Bus options (PCI, PCMCIA, EISA, MCA, ISA)
>#
>CONFIG_PCI=y
># CONFIG_PCI_GOBIOS is not set
># CONFIG_PCI_GODIRECT is not set
>CONFIG_PCI_GOANY=y
>CONFIG_PCI_BIOS=y
>CONFIG_PCI_DIRECT=y
># CONFIG_PCI_USE_VECTOR is not set
># CONFIG_PCI_LEGACY_PROC is not set
>CONFIG_PCI_NAMES=y
>CONFIG_ISA=y
># CONFIG_EISA is not set
># CONFIG_MCA is not set
># CONFIG_SCx200 is not set
>CONFIG_HOTPLUG=y
>
>#
># PCMCIA/CardBus support
>#
># CONFIG_PCMCIA is not set
>CONFIG_PCMCIA_PROBE=y
>
>#
># PCI Hotplug Support
>#
># CONFIG_HOTPLUG_PCI is not set
>
>#
># Executable file formats
>#
>CONFIG_BINFMT_ELF=y
>CONFIG_BINFMT_AOUT=y
>CONFIG_BINFMT_MISC=y
>
>#
># Device Drivers
>#
>
>#
># Generic Driver Options
>#
># CONFIG_FW_LOADER is not set
>
>#
># Memory Technology Devices (MTD)
>#
># CONFIG_MTD is not set
>
>#
># Parallel port support
>#
>CONFIG_PARPORT=y
>CONFIG_PARPORT_PC=y
>CONFIG_PARPORT_PC_CML1=y
># CONFIG_PARPORT_SERIAL is not set
>CONFIG_PARPORT_PC_FIFO=y
>CONFIG_PARPORT_PC_SUPERIO=y
>CONFIG_PARPORT_OTHER=y
>CONFIG_PARPORT_1284=y
>
>#
># Plug and Play support
>#
>CONFIG_PNP=y
># CONFIG_PNP_DEBUG is not set
>
>#
># Protocols
>#
>CONFIG_ISAPNP=y
>CONFIG_PNPBIOS=y
>
>#
># Block devices
>#
>CONFIG_BLK_DEV_FD=y
># CONFIG_BLK_DEV_XD is not set
># CONFIG_PARIDE is not set
># CONFIG_BLK_CPQ_DA is not set
># CONFIG_BLK_CPQ_CISS_DA is not set
># CONFIG_BLK_DEV_DAC960 is not set
># CONFIG_BLK_DEV_UMEM is not set
>CONFIG_BLK_DEV_LOOP=m
>CONFIG_BLK_DEV_CRYPTOLOOP=m
># CONFIG_BLK_DEV_NBD is not set
># CONFIG_BLK_DEV_RAM is not set
># CONFIG_BLK_DEV_INITRD is not set
># CONFIG_LBD is not set
>
>#
># ATA/ATAPI/MFM/RLL support
>#
>CONFIG_IDE=y
>CONFIG_BLK_DEV_IDE=y
>
>#
># Please see Documentation/ide.txt for help/info on IDE drives
>#
># CONFIG_BLK_DEV_HD_IDE is not set
>CONFIG_BLK_DEV_IDEDISK=y
>CONFIG_IDEDISK_MULTI_MODE=y
>CONFIG_IDEDISK_STROKE=y
>CONFIG_BLK_DEV_IDECD=y
># CONFIG_BLK_DEV_IDETAPE is not set
>CONFIG_BLK_DEV_IDEFLOPPY=y
>CONFIG_IDE_TASK_IOCTL=y
>CONFIG_IDE_TASKFILE_IO=y
>
>#
># IDE chipset support/bugfixes
>#
># CONFIG_BLK_DEV_CMD640 is not set
># CONFIG_BLK_DEV_IDEPNP is not set
>CONFIG_BLK_DEV_IDEPCI=y
>CONFIG_IDEPCI_SHARE_IRQ=y
>CONFIG_BLK_DEV_OFFBOARD=y
>CONFIG_BLK_DEV_GENERIC=y
># CONFIG_BLK_DEV_OPTI621 is not set
># CONFIG_BLK_DEV_RZ1000 is not set
>CONFIG_BLK_DEV_IDEDMA_PCI=y
># CONFIG_BLK_DEV_IDEDMA_FORCED is not set
># CONFIG_IDEDMA_PCI_AUTO is not set
>CONFIG_IDEDMA_PCI_WIP=y
>CONFIG_IDEDMA_NEW_DRIVE_LISTINGS=y
>CONFIG_BLK_DEV_ADMA=y
># CONFIG_BLK_DEV_AEC62XX is not set
># CONFIG_BLK_DEV_ALI15X3 is not set
># CONFIG_BLK_DEV_AMD74XX is not set
># CONFIG_BLK_DEV_CMD64X is not set
># CONFIG_BLK_DEV_TRIFLEX is not set
># CONFIG_BLK_DEV_CY82C693 is not set
># CONFIG_BLK_DEV_CS5520 is not set
># CONFIG_BLK_DEV_CS5530 is not set
># CONFIG_BLK_DEV_HPT34X is not set
>CONFIG_BLK_DEV_HPT366=y
># CONFIG_BLK_DEV_SC1200 is not set
>CONFIG_BLK_DEV_PIIX=y
># CONFIG_BLK_DEV_NS87415 is not set
># CONFIG_BLK_DEV_PDC202XX_OLD is not set
># CONFIG_BLK_DEV_PDC202XX_NEW is not set
># CONFIG_BLK_DEV_SVWKS is not set
># CONFIG_BLK_DEV_SIIMAGE is not set
># CONFIG_BLK_DEV_SIS5513 is not set
># CONFIG_BLK_DEV_SLC90E66 is not set
># CONFIG_BLK_DEV_TRM290 is not set
># CONFIG_BLK_DEV_VIA82CXXX is not set
># CONFIG_IDE_CHIPSETS is not set
>CONFIG_BLK_DEV_IDEDMA=y
>CONFIG_IDEDMA_IVB=y
># CONFIG_IDEDMA_AUTO is not set
># CONFIG_DMA_NONPCI is not set
># CONFIG_BLK_DEV_HD is not set
>
>#
># SCSI device support
>#
># CONFIG_SCSI is not set
>
>#
># Old CD-ROM drivers (not SCSI, not IDE)
>#
># CONFIG_CD_NO_IDESCSI is not set
>
>#
># Multi-device support (RAID and LVM)
>#
># CONFIG_MD is not set
>
>#
># Fusion MPT device support
>#
>
>#
># IEEE 1394 (FireWire) support (EXPERIMENTAL)
>#
># CONFIG_IEEE1394 is not set
>
>#
># I2O device support
>#
># CONFIG_I2O is not set
>
>#
># Networking support
>#
>CONFIG_NET=y
>
>#
># Networking options
>#
>CONFIG_PACKET=y
>CONFIG_PACKET_MMAP=y
># CONFIG_NETLINK_DEV is not set
>CONFIG_UNIX=y
># CONFIG_NET_KEY is not set
>CONFIG_INET=y
>CONFIG_IP_MULTICAST=y
># CONFIG_IP_ADVANCED_ROUTER is not set
># CONFIG_IP_PNP is not set
># CONFIG_NET_IPIP is not set
># CONFIG_NET_IPGRE is not set
>CONFIG_IP_MROUTE=y
>CONFIG_IP_PIMSM_V1=y
>CONFIG_IP_PIMSM_V2=y
># CONFIG_ARPD is not set
># CONFIG_INET_ECN is not set
># CONFIG_SYN_COOKIES is not set
># CONFIG_INET_AH is not set
># CONFIG_INET_ESP is not set
># CONFIG_INET_IPCOMP is not set
>
>#
># IP: Virtual Server Configuration
>#
># CONFIG_IP_VS is not set
># CONFIG_IPV6 is not set
># CONFIG_DECNET is not set
># CONFIG_BRIDGE is not set
>CONFIG_NETFILTER=y
># CONFIG_NETFILTER_DEBUG is not set
>
>#
># IP: Netfilter Configuration
>#
>CONFIG_IP_NF_CONNTRACK=m
>CONFIG_IP_NF_FTP=m
>CONFIG_IP_NF_IRC=m
>CONFIG_IP_NF_TFTP=m
># CONFIG_IP_NF_AMANDA is not set
># CONFIG_IP_NF_QUEUE is not set
>CONFIG_IP_NF_IPTABLES=m
>CONFIG_IP_NF_MATCH_LIMIT=m
>CONFIG_IP_NF_MATCH_IPRANGE=m
>CONFIG_IP_NF_MATCH_MAC=m
>CONFIG_IP_NF_MATCH_PKTTYPE=m
>CONFIG_IP_NF_MATCH_MARK=m
>CONFIG_IP_NF_MATCH_MULTIPORT=m
>CONFIG_IP_NF_MATCH_TOS=m
>CONFIG_IP_NF_MATCH_RECENT=m
>CONFIG_IP_NF_MATCH_ECN=m
>CONFIG_IP_NF_MATCH_DSCP=m
>CONFIG_IP_NF_MATCH_AH_ESP=m
>CONFIG_IP_NF_MATCH_LENGTH=m
>CONFIG_IP_NF_MATCH_TTL=m
>CONFIG_IP_NF_MATCH_TCPMSS=m
>CONFIG_IP_NF_MATCH_HELPER=m
>CONFIG_IP_NF_MATCH_STATE=m
>CONFIG_IP_NF_MATCH_CONNTRACK=m
>CONFIG_IP_NF_MATCH_OWNER=m
>CONFIG_IP_NF_FILTER=m
>CONFIG_IP_NF_TARGET_REJECT=m
>CONFIG_IP_NF_NAT=m
>CONFIG_IP_NF_NAT_NEEDED=y
>CONFIG_IP_NF_TARGET_MASQUERADE=m
>CONFIG_IP_NF_TARGET_REDIRECT=m
>CONFIG_IP_NF_TARGET_NETMAP=m
>CONFIG_IP_NF_TARGET_SAME=m
># CONFIG_IP_NF_NAT_LOCAL is not set
>CONFIG_IP_NF_NAT_SNMP_BASIC=m
>CONFIG_IP_NF_NAT_IRC=m
>CONFIG_IP_NF_NAT_FTP=m
>CONFIG_IP_NF_NAT_TFTP=m
>CONFIG_IP_NF_MANGLE=m
>CONFIG_IP_NF_TARGET_TOS=m
>CONFIG_IP_NF_TARGET_ECN=m
>CONFIG_IP_NF_TARGET_DSCP=m
>CONFIG_IP_NF_TARGET_MARK=m
>CONFIG_IP_NF_TARGET_CLASSIFY=m
># CONFIG_IP_NF_TARGET_LOG is not set
># CONFIG_IP_NF_TARGET_ULOG is not set
># CONFIG_IP_NF_TARGET_TCPMSS is not set
># CONFIG_IP_NF_ARPTABLES is not set
># CONFIG_IP_NF_COMPAT_IPCHAINS is not set
># CONFIG_IP_NF_COMPAT_IPFWADM is not set
>
>#
># SCTP Configuration (EXPERIMENTAL)
>#
>CONFIG_IPV6_SCTP__=y
># CONFIG_IP_SCTP is not set
># CONFIG_ATM is not set
># CONFIG_VLAN_8021Q is not set
># CONFIG_LLC2 is not set
># CONFIG_IPX is not set
># CONFIG_ATALK is not set
># CONFIG_X25 is not set
># CONFIG_LAPB is not set
># CONFIG_NET_DIVERT is not set
># CONFIG_ECONET is not set
># CONFIG_WAN_ROUTER is not set
># CONFIG_NET_FASTROUTE is not set
># CONFIG_NET_HW_FLOWCONTROL is not set
>
>#
># QoS and/or fair queueing
>#
># CONFIG_NET_SCHED is not set
>
>#
># Network testing
>#
># CONFIG_NET_PKTGEN is not set
>CONFIG_NETDEVICES=y
>
>#
># ARCnet devices
>#
># CONFIG_ARCNET is not set
>CONFIG_DUMMY=m
># CONFIG_BONDING is not set
># CONFIG_EQUALIZER is not set
># CONFIG_TUN is not set
># CONFIG_NET_SB1000 is not set
>
>#
># Ethernet (10 or 100Mbit)
>#
>CONFIG_NET_ETHERNET=y
>CONFIG_MII=m
># CONFIG_HAPPYMEAL is not set
># CONFIG_SUNGEM is not set
># CONFIG_NET_VENDOR_3COM is not set
># CONFIG_LANCE is not set
># CONFIG_NET_VENDOR_SMC is not set
># CONFIG_NET_VENDOR_RACAL is not set
>
>#
># Tulip family network device support
>#
># CONFIG_NET_TULIP is not set
># CONFIG_AT1700 is not set
># CONFIG_DEPCA is not set
># CONFIG_HP100 is not set
># CONFIG_NET_ISA is not set
>CONFIG_NET_PCI=y
># CONFIG_PCNET32 is not set
># CONFIG_AMD8111_ETH is not set
># CONFIG_ADAPTEC_STARFIRE is not set
># CONFIG_AC3200 is not set
># CONFIG_APRICOT is not set
># CONFIG_B44 is not set
># CONFIG_CS89x0 is not set
># CONFIG_EEPRO100 is not set
># CONFIG_E100 is not set
># CONFIG_FEALNX is not set
># CONFIG_NATSEMI is not set
># CONFIG_NE2K_PCI is not set
># CONFIG_8139CP is not set
>CONFIG_8139TOO=m
># CONFIG_8139TOO_PIO is not set
># CONFIG_8139TOO_TUNE_TWISTER is not set
># CONFIG_8139TOO_8129 is not set
># CONFIG_8139_OLD_RX_RESET is not set
># CONFIG_SIS900 is not set
># CONFIG_EPIC100 is not set
># CONFIG_SUNDANCE is not set
># CONFIG_TLAN is not set
># CONFIG_VIA_RHINE is not set
># CONFIG_NET_POCKET is not set
>
>#
># Ethernet (1000 Mbit)
>#
># CONFIG_DL2K is not set
># CONFIG_E1000 is not set
># CONFIG_NS83820 is not set
># CONFIG_HAMACHI is not set
># CONFIG_YELLOWFIN is not set
># CONFIG_R8169 is not set
># CONFIG_SIS190 is not set
># CONFIG_SK98LIN is not set
># CONFIG_TIGON3 is not set
>
>#
># Ethernet (10000 Mbit)
>#
># CONFIG_IXGB is not set
># CONFIG_FDDI is not set
># CONFIG_HIPPI is not set
># CONFIG_PLIP is not set
>CONFIG_PPP=m
>CONFIG_PPP_MULTILINK=y
>CONFIG_PPP_FILTER=y
>CONFIG_PPP_ASYNC=m
>CONFIG_PPP_SYNC_TTY=m
>CONFIG_PPP_DEFLATE=m
>CONFIG_PPP_BSDCOMP=m
>CONFIG_PPPOE=m
># CONFIG_SLIP is not set
>
>#
># Wireless LAN (non-hamradio)
>#
># CONFIG_NET_RADIO is not set
>
>#
># Token Ring devices
>#
># CONFIG_TR is not set
># CONFIG_RCPCI is not set
># CONFIG_SHAPER is not set
>
>#
># Wan interfaces
>#
># CONFIG_WAN is not set
>
>#
># Amateur Radio support
>#
># CONFIG_HAMRADIO is not set
>
>#
># IrDA (infrared) support
>#
># CONFIG_IRDA is not set
>
>#
># Bluetooth support
>#
># CONFIG_BT is not set
>
>#
># ISDN subsystem
>#
># CONFIG_ISDN_BOOL is not set
>
>#
># Telephony Support
>#
># CONFIG_PHONE is not set
>
>#
># Input device support
>#
>CONFIG_INPUT=y
>
>#
># Userland interfaces
>#
>CONFIG_INPUT_MOUSEDEV=y
>CONFIG_INPUT_MOUSEDEV_PSAUX=y
>CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
>CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
># CONFIG_INPUT_JOYDEV is not set
># CONFIG_INPUT_TSDEV is not set
># CONFIG_INPUT_EVDEV is not set
># CONFIG_INPUT_EVBUG is not set
>
>#
># Input I/O drivers
>#
># CONFIG_GAMEPORT is not set
>CONFIG_SOUND_GAMEPORT=y
>CONFIG_SERIO=y
>CONFIG_SERIO_I8042=y
>CONFIG_SERIO_SERPORT=y
># CONFIG_SERIO_CT82C710 is not set
># CONFIG_SERIO_PARKBD is not set
># CONFIG_SERIO_PCIPS2 is not set
>
>#
># Input Device Drivers
>#
>CONFIG_INPUT_KEYBOARD=y
>CONFIG_KEYBOARD_ATKBD=y
># CONFIG_KEYBOARD_SUNKBD is not set
># CONFIG_KEYBOARD_XTKBD is not set
># CONFIG_KEYBOARD_NEWTON is not set
>CONFIG_INPUT_MOUSE=y
>CONFIG_MOUSE_PS2=y
># CONFIG_MOUSE_SERIAL is not set
># CONFIG_MOUSE_INPORT is not set
># CONFIG_MOUSE_LOGIBM is not set
># CONFIG_MOUSE_PC110PAD is not set
># CONFIG_INPUT_JOYSTICK is not set
># CONFIG_INPUT_TOUCHSCREEN is not set
>CONFIG_INPUT_MISC=y
>CONFIG_INPUT_PCSPKR=m
># CONFIG_INPUT_UINPUT is not set
>
>#
># Character devices
>#
>CONFIG_VT=y
>CONFIG_VT_CONSOLE=y
>CONFIG_HW_CONSOLE=y
># CONFIG_SERIAL_NONSTANDARD is not set
>
>#
># Serial drivers
>#
>CONFIG_SERIAL_8250=y
># CONFIG_SERIAL_8250_CONSOLE is not set
>CONFIG_SERIAL_8250_ACPI=y
>CONFIG_SERIAL_8250_NR_UARTS=4
># CONFIG_SERIAL_8250_EXTENDED is not set
>
>#
># Non-8250 serial port support
>#
>CONFIG_SERIAL_CORE=y
>CONFIG_UNIX98_PTYS=y
>CONFIG_UNIX98_PTY_COUNT=256
>CONFIG_PRINTER=y
># CONFIG_LP_CONSOLE is not set
># CONFIG_PPDEV is not set
># CONFIG_TIPAR is not set
>
>#
># I2C support
>#
>CONFIG_I2C=m
>CONFIG_I2C_CHARDEV=m
>
>#
># I2C Algorithms
>#
>CONFIG_I2C_ALGOBIT=m
>CONFIG_I2C_ALGOPCF=m
>
>#
># I2C Hardware Bus support
>#
># CONFIG_I2C_ALI1535 is not set
># CONFIG_I2C_ALI15X3 is not set
># CONFIG_I2C_AMD756 is not set
># CONFIG_I2C_AMD8111 is not set
># CONFIG_I2C_ELV is not set
># CONFIG_I2C_I801 is not set
># CONFIG_I2C_I810 is not set
># CONFIG_I2C_ISA is not set
># CONFIG_I2C_NFORCE2 is not set
># CONFIG_I2C_PHILIPSPAR is not set
>CONFIG_I2C_PIIX4=m
># CONFIG_I2C_PROSAVAGE is not set
># CONFIG_I2C_SAVAGE4 is not set
># CONFIG_SCx200_ACB is not set
># CONFIG_I2C_SIS5595 is not set
># CONFIG_I2C_SIS630 is not set
># CONFIG_I2C_SIS96X is not set
># CONFIG_I2C_VELLEMAN is not set
># CONFIG_I2C_VIA is not set
># CONFIG_I2C_VIAPRO is not set
># CONFIG_I2C_VOODOO3 is not set
>
>#
># I2C Hardware Sensors Chip support
>#
># CONFIG_I2C_SENSOR is not set
># CONFIG_SENSORS_ADM1021 is not set
># CONFIG_SENSORS_EEPROM is not set
># CONFIG_SENSORS_IT87 is not set
># CONFIG_SENSORS_LM75 is not set
># CONFIG_SENSORS_LM78 is not set
># CONFIG_SENSORS_LM83 is not set
># CONFIG_SENSORS_LM85 is not set
># CONFIG_SENSORS_VIA686A is not set
># CONFIG_SENSORS_W83781D is not set
>
>#
># Mice
>#
># CONFIG_BUSMOUSE is not set
># CONFIG_QIC02_TAPE is not set
>
>#
># IPMI
>#
># CONFIG_IPMI_HANDLER is not set
>
>#
># Watchdog Cards
>#
># CONFIG_WATCHDOG is not set
># CONFIG_HW_RANDOM is not set
>CONFIG_NVRAM=m
>CONFIG_RTC=m
># CONFIG_GEN_RTC is not set
># CONFIG_DTLK is not set
># CONFIG_R3964 is not set
># CONFIG_APPLICOM is not set
># CONFIG_SONYPI is not set
>
>#
># Ftape, the floppy tape device driver
>#
>CONFIG_AGP=y
># CONFIG_AGP_ALI is not set
># CONFIG_AGP_ATI is not set
># CONFIG_AGP_AMD is not set
># CONFIG_AGP_AMD64 is not set
>CONFIG_AGP_INTEL=y
># CONFIG_AGP_NVIDIA is not set
># CONFIG_AGP_SIS is not set
># CONFIG_AGP_SWORKS is not set
># CONFIG_AGP_VIA is not set
>CONFIG_DRM=y
># CONFIG_DRM_TDFX is not set
># CONFIG_DRM_GAMMA is not set
># CONFIG_DRM_R128 is not set
># CONFIG_DRM_RADEON is not set
># CONFIG_DRM_I810 is not set
># CONFIG_DRM_I830 is not set
>CONFIG_DRM_MGA=y
># CONFIG_DRM_SIS is not set
># CONFIG_MWAVE is not set
># CONFIG_RAW_DRIVER is not set
># CONFIG_HANGCHECK_TIMER is not set
>
>#
># Multimedia devices
>#
># CONFIG_VIDEO_DEV is not set
>
>#
># Digital Video Broadcasting Devices
>#
># CONFIG_DVB is not set
>
>#
># Graphics support
>#
>CONFIG_FB=y
># CONFIG_FB_CYBER2000 is not set
># CONFIG_FB_IMSTT is not set
># CONFIG_FB_VGA16 is not set
># CONFIG_FB_VESA is not set
>CONFIG_VIDEO_SELECT=y
># CONFIG_FB_HGA is not set
># CONFIG_FB_RIVA is not set
># CONFIG_FB_I810 is not set
>CONFIG_FB_MATROX=m
># CONFIG_FB_MATROX_MILLENIUM is not set
># CONFIG_FB_MATROX_MYSTIQUE is not set
># CONFIG_FB_MATROX_G450 is not set
>CONFIG_FB_MATROX_G100A=y
>CONFIG_FB_MATROX_G100=y
>CONFIG_FB_MATROX_I2C=m
>CONFIG_FB_MATROX_MAVEN=m
># CONFIG_FB_MATROX_MULTIHEAD is not set
># CONFIG_FB_RADEON is not set
># CONFIG_FB_ATY128 is not set
># CONFIG_FB_ATY is not set
># CONFIG_FB_SIS is not set
># CONFIG_FB_NEOMAGIC is not set
># CONFIG_FB_3DFX is not set
># CONFIG_FB_VOODOO1 is not set
># CONFIG_FB_TRIDENT is not set
># CONFIG_FB_VIRTUAL is not set
>
>#
># Console display driver support
>#
>CONFIG_VGA_CONSOLE=y
># CONFIG_MDA_CONSOLE is not set
>CONFIG_DUMMY_CONSOLE=y
># CONFIG_FRAMEBUFFER_CONSOLE is not set
>
>#
># Logo configuration
>#
># CONFIG_LOGO is not set
>
>#
># Sound
>#
>CONFIG_SOUND=y
>
>#
># Advanced Linux Sound Architecture
>#
>CONFIG_SND=y
>CONFIG_SND_SEQUENCER=y
>CONFIG_SND_SEQ_DUMMY=y
>CONFIG_SND_OSSEMUL=y
>CONFIG_SND_MIXER_OSS=y
>CONFIG_SND_PCM_OSS=y
>CONFIG_SND_SEQUENCER_OSS=y
>CONFIG_SND_RTCTIMER=m
># CONFIG_SND_VERBOSE_PRINTK is not set
># CONFIG_SND_DEBUG is not set
>
>#
># Generic devices
>#
># CONFIG_SND_DUMMY is not set
># CONFIG_SND_VIRMIDI is not set
># CONFIG_SND_MTPAV is not set
># CONFIG_SND_SERIAL_U16550 is not set
># CONFIG_SND_MPU401 is not set
>
>#
># ISA devices
>#
># CONFIG_SND_AD1816A is not set
># CONFIG_SND_AD1848 is not set
># CONFIG_SND_CS4231 is not set
># CONFIG_SND_CS4232 is not set
># CONFIG_SND_CS4236 is not set
># CONFIG_SND_ES968 is not set
>CONFIG_SND_ES1688=y
>CONFIG_SND_ES18XX=y
># CONFIG_SND_GUSCLASSIC is not set
># CONFIG_SND_GUSEXTREME is not set
># CONFIG_SND_GUSMAX is not set
># CONFIG_SND_INTERWAVE is not set
># CONFIG_SND_INTERWAVE_STB is not set
># CONFIG_SND_OPTI92X_AD1848 is not set
># CONFIG_SND_OPTI92X_CS4231 is not set
># CONFIG_SND_OPTI93X is not set
># CONFIG_SND_SB8 is not set
># CONFIG_SND_SB16 is not set
># CONFIG_SND_SBAWE is not set
># CONFIG_SND_WAVEFRONT is not set
># CONFIG_SND_ALS100 is not set
># CONFIG_SND_AZT2320 is not set
># CONFIG_SND_CMI8330 is not set
># CONFIG_SND_DT019X is not set
># CONFIG_SND_OPL3SA2 is not set
># CONFIG_SND_SGALAXY is not set
># CONFIG_SND_SSCAPE is not set
>
>#
># PCI devices
>#
># CONFIG_SND_ALI5451 is not set
># CONFIG_SND_AZT3328 is not set
># CONFIG_SND_CS46XX is not set
># CONFIG_SND_CS4281 is not set
># CONFIG_SND_EMU10K1 is not set
># CONFIG_SND_KORG1212 is not set
># CONFIG_SND_NM256 is not set
># CONFIG_SND_RME32 is not set
># CONFIG_SND_RME96 is not set
># CONFIG_SND_RME9652 is not set
># CONFIG_SND_HDSP is not set
># CONFIG_SND_TRIDENT is not set
># CONFIG_SND_YMFPCI is not set
># CONFIG_SND_ALS4000 is not set
># CONFIG_SND_CMIPCI is not set
># CONFIG_SND_ENS1370 is not set
># CONFIG_SND_ENS1371 is not set
># CONFIG_SND_ES1938 is not set
># CONFIG_SND_ES1968 is not set
># CONFIG_SND_MAESTRO3 is not set
># CONFIG_SND_FM801 is not set
># CONFIG_SND_ICE1712 is not set
># CONFIG_SND_ICE1724 is not set
># CONFIG_SND_INTEL8X0 is not set
># CONFIG_SND_SONICVIBES is not set
># CONFIG_SND_VIA82XX is not set
># CONFIG_SND_VX222 is not set
>
>#
># ALSA USB devices
>#
># CONFIG_SND_USB_AUDIO is not set
>
>#
># Open Sound System
>#
># CONFIG_SOUND_PRIME is not set
>
>#
># USB support
>#
>CONFIG_USB=y
># CONFIG_USB_DEBUG is not set
>
>#
># Miscellaneous USB options
>#
># CONFIG_USB_DEVICEFS is not set
># CONFIG_USB_BANDWIDTH is not set
># CONFIG_USB_DYNAMIC_MINORS is not set
>
>#
># USB Host Controller Drivers
>#
>CONFIG_USB_EHCI_HCD=y
># CONFIG_USB_OHCI_HCD is not set
>CONFIG_USB_UHCI_HCD=y
>
>#
># USB Device Class drivers
>#
># CONFIG_USB_AUDIO is not set
># CONFIG_USB_BLUETOOTH_TTY is not set
># CONFIG_USB_MIDI is not set
># CONFIG_USB_ACM is not set
># CONFIG_USB_PRINTER is not set
>
>#
># SCSI support is needed for USB Storage
>#
># CONFIG_USB_STORAGE is not set
>
>#
># USB Human Interface Devices (HID)
>#
>CONFIG_USB_HID=y
>CONFIG_USB_HIDINPUT=y
># CONFIG_HID_FF is not set
># CONFIG_USB_HIDDEV is not set
># CONFIG_USB_AIPTEK is not set
># CONFIG_USB_WACOM is not set
># CONFIG_USB_KBTAB is not set
># CONFIG_USB_POWERMATE is not set
># CONFIG_USB_XPAD is not set
>
>#
># USB Imaging devices
>#
># CONFIG_USB_MDC800 is not set
># CONFIG_USB_SCANNER is not set
>
>#
># USB Multimedia devices
>#
>
>#
># Video4Linux support is needed for USB Multimedia device support
>#
>
>#
># USB Network adaptors
>#
># CONFIG_USB_CATC is not set
># CONFIG_USB_KAWETH is not set
># CONFIG_USB_PEGASUS is not set
># CONFIG_USB_RTL8150 is not set
># CONFIG_USB_USBNET is not set
>
>#
># USB port drivers
>#
># CONFIG_USB_USS720 is not set
>
>#
># USB Serial Converter support
>#
># CONFIG_USB_SERIAL is not set
>
>#
># USB Miscellaneous drivers
>#
># CONFIG_USB_TIGL is not set
># CONFIG_USB_AUERSWALD is not set
># CONFIG_USB_RIO500 is not set
># CONFIG_USB_LEGOTOWER is not set
># CONFIG_USB_BRLVGER is not set
># CONFIG_USB_LCD is not set
># CONFIG_USB_GADGET is not set
>
>#
># File systems
>#
>CONFIG_EXT2_FS=y
># CONFIG_EXT2_FS_XATTR is not set
>CONFIG_EXT3_FS=y
>CONFIG_EXT3_FS_XATTR=y
># CONFIG_EXT3_FS_POSIX_ACL is not set
># CONFIG_EXT3_FS_SECURITY is not set
>CONFIG_JBD=y
># CONFIG_JBD_DEBUG is not set
>CONFIG_FS_MBCACHE=y
># CONFIG_REISERFS_FS is not set
># CONFIG_JFS_FS is not set
># CONFIG_XFS_FS is not set
># CONFIG_MINIX_FS is not set
># CONFIG_ROMFS_FS is not set
># CONFIG_QUOTA is not set
># CONFIG_AUTOFS_FS is not set
>CONFIG_AUTOFS4_FS=y
>
>#
># CD-ROM/DVD Filesystems
>#
>CONFIG_ISO9660_FS=y
>CONFIG_JOLIET=y
>CONFIG_ZISOFS=y
>CONFIG_ZISOFS_FS=y
># CONFIG_UDF_FS is not set
>
>#
># DOS/FAT/NT Filesystems
>#
>CONFIG_FAT_FS=m
># CONFIG_MSDOS_FS is not set
>CONFIG_VFAT_FS=m
># CONFIG_NTFS_FS is not set
>
>#
># Pseudo filesystems
>#
>CONFIG_PROC_FS=y
>CONFIG_PROC_KCORE=y
># CONFIG_DEVFS_FS is not set
>CONFIG_DEVPTS_FS=y
>CONFIG_DEVPTS_FS_XATTR=y
># CONFIG_DEVPTS_FS_SECURITY is not set
>CONFIG_TMPFS=y
># CONFIG_HUGETLBFS is not set
># CONFIG_HUGETLB_PAGE is not set
>CONFIG_RAMFS=y
>
>#
># Miscellaneous filesystems
>#
># CONFIG_ADFS_FS is not set
># CONFIG_AFFS_FS is not set
># CONFIG_HFS_FS is not set
># CONFIG_BEFS_FS is not set
># CONFIG_BFS_FS is not set
># CONFIG_EFS_FS is not set
># CONFIG_CRAMFS is not set
># CONFIG_VXFS_FS is not set
># CONFIG_HPFS_FS is not set
># CONFIG_QNX4FS_FS is not set
># CONFIG_SYSV_FS is not set
># CONFIG_UFS_FS is not set
>
>#
># Network File Systems
>#
>CONFIG_NFS_FS=y
>CONFIG_NFS_V3=y
># CONFIG_NFS_V4 is not set
>CONFIG_NFS_DIRECTIO=y
>CONFIG_NFSD=y
>CONFIG_NFSD_V3=y
># CONFIG_NFSD_V4 is not set
>CONFIG_NFSD_TCP=y
>CONFIG_LOCKD=y
>CONFIG_LOCKD_V4=y
>CONFIG_EXPORTFS=y
>CONFIG_SUNRPC=y
># CONFIG_SUNRPC_GSS is not set
>CONFIG_SMB_FS=m
># CONFIG_SMB_NLS_DEFAULT is not set
># CONFIG_CIFS is not set
># CONFIG_NCP_FS is not set
># CONFIG_CODA_FS is not set
># CONFIG_INTERMEZZO_FS is not set
># CONFIG_AFS_FS is not set
>
>#
># Partition Types
>#
># CONFIG_PARTITION_ADVANCED is not set
>CONFIG_MSDOS_PARTITION=y
>
>#
># Native Language Support
>#
>CONFIG_NLS=y
>CONFIG_NLS_DEFAULT="iso8859-1"
># CONFIG_NLS_CODEPAGE_437 is not set
># CONFIG_NLS_CODEPAGE_737 is not set
># CONFIG_NLS_CODEPAGE_775 is not set
># CONFIG_NLS_CODEPAGE_850 is not set
>CONFIG_NLS_CODEPAGE_852=m
># CONFIG_NLS_CODEPAGE_855 is not set
># CONFIG_NLS_CODEPAGE_857 is not set
># CONFIG_NLS_CODEPAGE_860 is not set
># CONFIG_NLS_CODEPAGE_861 is not set
># CONFIG_NLS_CODEPAGE_862 is not set
># CONFIG_NLS_CODEPAGE_863 is not set
># CONFIG_NLS_CODEPAGE_864 is not set
># CONFIG_NLS_CODEPAGE_865 is not set
># CONFIG_NLS_CODEPAGE_866 is not set
># CONFIG_NLS_CODEPAGE_869 is not set
># CONFIG_NLS_CODEPAGE_936 is not set
># CONFIG_NLS_CODEPAGE_950 is not set
># CONFIG_NLS_CODEPAGE_932 is not set
># CONFIG_NLS_CODEPAGE_949 is not set
># CONFIG_NLS_CODEPAGE_874 is not set
># CONFIG_NLS_ISO8859_8 is not set
>CONFIG_NLS_CODEPAGE_1250=m
># CONFIG_NLS_CODEPAGE_1251 is not set
># CONFIG_NLS_ISO8859_1 is not set
>CONFIG_NLS_ISO8859_2=m
># CONFIG_NLS_ISO8859_3 is not set
># CONFIG_NLS_ISO8859_4 is not set
># CONFIG_NLS_ISO8859_5 is not set
># CONFIG_NLS_ISO8859_6 is not set
># CONFIG_NLS_ISO8859_7 is not set
># CONFIG_NLS_ISO8859_9 is not set
># CONFIG_NLS_ISO8859_13 is not set
># CONFIG_NLS_ISO8859_14 is not set
># CONFIG_NLS_ISO8859_15 is not set
># CONFIG_NLS_KOI8_R is not set
># CONFIG_NLS_KOI8_U is not set
>CONFIG_NLS_UTF8=m
>
>#
># Profiling support
>#
># CONFIG_PROFILING is not set
>
>#
># Kernel hacking
>#
># CONFIG_DEBUG_KERNEL is not set
># CONFIG_DEBUG_SPINLOCK_SLEEP is not set
># CONFIG_FRAME_POINTER is not set
>CONFIG_X86_EXTRA_IRQS=y
>CONFIG_X86_FIND_SMP_CONFIG=y
>CONFIG_X86_MPPARSE=y
>
>#
># Security options
>#
># CONFIG_SECURITY is not set
>
>#
># Cryptographic options
>#
>CONFIG_CRYPTO=y
># CONFIG_CRYPTO_HMAC is not set
># CONFIG_CRYPTO_NULL is not set
># CONFIG_CRYPTO_MD4 is not set
># CONFIG_CRYPTO_MD5 is not set
># CONFIG_CRYPTO_SHA1 is not set
># CONFIG_CRYPTO_SHA256 is not set
># CONFIG_CRYPTO_SHA512 is not set
># CONFIG_CRYPTO_DES is not set
># CONFIG_CRYPTO_BLOWFISH is not set
># CONFIG_CRYPTO_TWOFISH is not set
># CONFIG_CRYPTO_SERPENT is not set
># CONFIG_CRYPTO_AES is not set
># CONFIG_CRYPTO_CAST5 is not set
># CONFIG_CRYPTO_CAST6 is not set
># CONFIG_CRYPTO_DEFLATE is not set
># CONFIG_CRYPTO_TEST is not set
>
>#
># Library routines
>#
>CONFIG_CRC32=m
>CONFIG_ZLIB_INFLATE=y
>CONFIG_ZLIB_DEFLATE=m
>CONFIG_X86_SMP=y
>CONFIG_X86_HT=y
>CONFIG_X86_BIOS_REBOOT=y
>CONFIG_X86_TRAMPOLINE=y
>CONFIG_PC=y
>  
>
>------------------------------------------------------------------------
>
>Linux version 2.6.1-rc3 (root@suicider) (gcc version 3.3.3 20040110 (prerelease) (Debian)) #1 SMP Sun Jan 18 12:23:16 CET 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>255MB LOWMEM available.
>found SMP MP-table at 000f5ae0
>hm, page 000f5000 reserved twice.
>hm, page 000f6000 reserved twice.
>hm, page 000f1000 reserved twice.
>hm, page 000f2000 reserved twice.
>On node 0 totalpages: 65520
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 61424 pages, LIFO batch:14
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.2 present.
>ACPI: RSDP (v000 ABIT                                      ) @ 0x000f7370
>ACPI: RSDT (v001 ABIT   AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
>ACPI: FADT (v001 ABIT   AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
>ACPI: MADT (v001 ABIT            0x00000000  0x00000000) @ 0x0fff54c0
>ACPI: DSDT (v001 ABIT   AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:6 APIC version 17
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:6 APIC version 17
>ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
>IOAPIC[0]: Assigned apic_id 2
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23
>ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1])
>ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] trigger[0x0])
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Building zonelist for node : 0
>Kernel command line: BOOT_IMAGE=Linux ro root=2104 acpi=force
>Initializing CPU#0
>PID hash table entries: 1024 (order 10: 8192 bytes)
>Detected 440.087 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Memory: 254888k/262080k available (2517k kernel code, 6472k reserved, 911k data, 176k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 868.35 BogoMIPS
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU:     After generic identify, caps: 0183fbff 00000000 00000000 00000000
>CPU:     After vendor identify, caps: 0183fbff 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU:     After all inits, caps: 0183fbff 00000000 00000000 00000040
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Enabling fast FPU save and restore... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>CPU0: Intel Celeron (Mendocino) stepping 05
>per-CPU timeslice cutoff: 365.12 usecs.
>task migration cache decay timeout: 1 msecs.
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000000
>ESR value after enabling vector: 00000000
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>masked ExtINT on CPU#1
>ESR value before enabling vector: 00000000
>ESR value after enabling vector: 00000000
>Calibrating delay loop... 878.59 BogoMIPS
>CPU:     After generic identify, caps: 0183fbff 00000000 00000000 00000000
>CPU:     After vendor identify, caps: 0183fbff 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU:     After all inits, caps: 0183fbff 00000000 00000000 00000040
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Celeron (Mendocino) stepping 05
>Total of 2 processors activated (1746.94 BogoMIPS).
>ENABLING IO-APIC IRQs
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
>..TIMER: vector=0x31 pin1=2 pin2=-1
>number of MP IRQ sources: 15.
>number of IO-APIC #2 registers: 24.
>testing the IO APIC.......................
>IO APIC #2......
>.... register #00: 02000000
>.......    : physical APIC id: 02
>.......    : Delivery Type: 0
>.......    : LTS          : 0
>.... register #01: 00170011
>.......     : max redirection entries: 0017
>.......     : PRQ implemented: 0
>.......     : IO APIC version: 0011
>.... register #02: 00000000
>.......     : arbitration: 00
>.... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> 00 000 00  1    0    0   0   0    0    0    00
> 01 001 01  0    0    0   0   0    1    1    39
> 02 001 01  0    0    0   0   0    1    1    31
> 03 001 01  0    0    0   0   0    1    1    41
> 04 001 01  0    0    0   0   0    1    1    49
> 05 001 01  0    0    0   0   0    1    1    51
> 06 001 01  0    0    0   0   0    1    1    59
> 07 001 01  0    0    0   0   0    1    1    61
> 08 001 01  0    0    0   0   0    1    1    69
> 09 001 01  0    0    0   0   0    1    1    71
> 0a 001 01  0    0    0   0   0    1    1    79
> 0b 001 01  0    0    0   0   0    1    1    81
> 0c 001 01  0    0    0   0   0    1    1    89
> 0d 001 01  0    0    0   0   0    1    1    91
> 0e 001 01  0    0    0   0   0    1    1    99
> 0f 001 01  0    0    0   0   0    1    1    A1
> 10 000 00  1    0    0   0   0    0    0    00
> 11 000 00  1    0    0   0   0    0    0    00
> 12 000 00  1    0    0   0   0    0    0    00
> 13 000 00  1    0    0   0   0    0    0    00
> 14 000 00  1    0    0   0   0    0    0    00
> 15 000 00  1    0    0   0   0    0    0    00
> 16 000 00  1    0    0   0   0    0    0    00
> 17 000 00  1    0    0   0   0    0    0    00
>IRQ to pin mappings:
>IRQ0 -> 0:2
>IRQ1 -> 0:1
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>.................................... done.
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 439.0901 MHz.
>..... host bus clock speed is 79.0981 MHz.
>checking TSC synchronization across 2 CPUs: passed.
>Starting migration thread for cpu 0
>Bringing up 1
>CPU 1 IS NOW UP!
>Starting migration thread for cpu 1
>CPUS done 2
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfb5c0, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Subsystem revision 20031002
>IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:0 Active:0)
>    ACPI-0352: *** Error: Looking up [\_PR_.CPU0] in namespace, AE_NOT_FOUND
>search_node cff74ca0 start_node cff74ca0 return_node 00000000
>    ACPI-1120: *** Error: [NULL NAME], AE_NOT_FOUND
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>PnPBIOS: Scanning system for PnP BIOS support...
>PnPBIOS: Found PnP BIOS installation structure at 0xc00fc1e0
>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc208, dseg 0xf0000
>pnp: 00:0b: ioport range 0x208-0x20f has been reserved
>PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
>drivers/usb/core/usb.c: registered new driver hub
>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1)
>00:00:0f[A] -> 2-16 -> IRQ 16
>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1)
>00:00:0f[B] -> 2-17 -> IRQ 17
>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1)
>00:00:0f[C] -> 2-18 -> IRQ 18
>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
>00:00:0f[D] -> 2-19 -> IRQ 19
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-18 already programmed
>Pin 2-18 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>Pin 2-16 already programmed
>Pin 2-17 already programmed
>Pin 2-18 already programmed
>Pin 2-19 already programmed
>PCI: Using ACPI for IRQ routing
>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
>Starting balanced_irq
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>Initializing Cryptographic API
>Limiting direct PCI/PCI transfers.
>isapnp: Scanning for PnP cards...
>isapnp: Card 'ESS ES1868 Plug and Play AudioDrive'
>isapnp: 1 Plug & Play card detected total
>pty: 256 Unix98 ptys configured
>request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
>lp: driver loaded but no devices found
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: Maximum main memory to use for agp memory: 203M
>agpgart: AGP aperture is 64M @ 0xd0000000
>[drm] Initialized mga 3.1.0 20021029 on minor 0
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
>parport0: irq 7 detected
>parport0: cpp_daisy: aa5500ff(98)
>parport0: assign_addrs: aa5500ff(98)
>parport0: Printer, Canon BJC-3000
>lp0: using parport0 (polling).
>Using anticipatory io scheduler
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
>HPT366: onboard version of chipset, pin1=1 pin2=2
>HPT366: IDE controller at PCI slot 0000:00:13.0
>HPT366: chipset revision 1
>HPT366: 100% native mode on irq 18
>    ide2: BM-DMA at 0xe000-0xe007, BIOS settings: hde:pio, hdf:pio
>    ide3: BM-DMA at 0xec00-0xec07, BIOS settings: hdg:pio, hdh:pio
>hdc: DV-516E, ATAPI CD/DVD-ROM drive
>hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
>hde: ST380011A, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide2 at 0xd800-0xd807,0xdc02 on irq 18
>hde: max request size: 1024KiB
>hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
> hde: hde1 hde2 hde3 hde4
>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
>Uniform CD-ROM driver Revision: 3.12
>ide-floppy driver 0.99.newide
>hdd: No disk in drive
>hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
>drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: irq 19, io base 0000d000
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>drivers/usb/core/usb.c: registered new driver hid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>serio: i8042 AUX port at 0x60,0x64 irq 12
>input: PS2++ Logitech Wheel Mouse on isa0060/serio1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>input: AT Translated Set 2 keyboard on isa0060/serio0
>Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC).
>request_module: failed /sbin/modprobe -- snd-card-0. error = -16
>pnp: Device 01:01.00 activated.
>pnp: Device 01:01.01 activated.
>ALSA device list:
>  #0: ESS AudioDrive ES1868 at 0x220, irq 5, dma1 1, dma2 0
>NET: Registered protocol family 2
>IP: routing cache hash table of 2048 buckets, 16Kbytes
>TCP: Hash tables configured (established 16384 bind 16384)
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S4 S4bios S5)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Freeing unused kernel memory: 176k freed
>Adding 498004k swap on /dev/hde3.  Priority:-1 extents:1
>Losing too many ticks!
>TSC cannot be used as a timesource. (Are you running with SpeedStep?)
>Falling back to a sane timesource.
>EXT3 FS on hde4, internal journal
>Real Time Clock Driver v1.12
>8139too Fast Ethernet driver 0.9.26
>eth0: RealTek RTL8139 at 0xd086b000, 00:e0:7d:83:e1:89, IRQ 17
>eth0:  Identified 8139 chip type 'RTL-8139B'
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hde1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>request_module: failed /sbin/modprobe -- nls_cp437. error = 256
>Unable to load NLS charset cp437
>Unable to load NLS charset iso8859-1
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>request_module: failed /sbin/modprobe -- snd-card-1. error = 256
>request_module: failed /sbin/modprobe -- net-pf-10. error = 256
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (2047 buckets, 16376 max) - 304 bytes per conntrack
>request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
>agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
>atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
>atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
>request_module: failed /sbin/modprobe -- net-pf-10. error = 256
>request_module: failed /sbin/modprobe -- net-pf-10. error = 256
>cdrom: This disc doesn't have any tracks I recognize!
>request_module: failed /sbin/modprobe -- net-pf-10. error = 256
>ACPI: Processor [CPU] (supports C1)
>ACPI: Processor [CPU1] (supports C1)
>  
>


-- 
swilliams@hpti.com http://www.hpti.com Personal: sdw@lig.net http://sdw.st
Stephen D. Williams 703-724-0118W 703-995-0407Fax 20147-4622 AIM: sdw


--------------010802030109060208050702
Content-Type: text/x-vcard; charset=utf8;
 name="sdw.vcf"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="sdw.vcf"

begin:vcard
fn:Stephen Williams
n:Williams;Stephen
email;internet:sdw@lig.net
tel;work:703-724-0118
tel;fax:703-995-0407
tel;pager:sdwpage@lig.net
tel;home:703-729-5405
tel;cell:703-371-9362
x-mozilla-html:TRUE
version:2.1
end:vcard


--------------010802030109060208050702--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/