Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Priit Laes <plaes@plaes.org>
To:     Lee Jones <lee.jones@linaro.org>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Chen-Yu Tsai <wens@csie.org>,
        Maxime Ripard <maxime.ripard@bootlin.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        Olliver Schinagl <oliver@schinagl.nl>,
        linux-sunxi <linux-sunxi@googlegroups.com>
Cc:     Priit Laes <plaes@plaes.org>
Subject: [PATCH 0/8] This is a second edition of a series that implements voltage
Date:   Mon, 10 Dec 2018 20:42:11 +0200
Message-Id: <cover.4110554ae84987dedb8b58888a8a63d6b7f98c72.1544466940.git-series.plaes@plaes.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

ramping for AXP209 DCDC2 and LDO3 regulators and software
based soft-start for AXP209 LDO3 regulator.

Both features are needed to work around a PMIC shutdown when
toggling LDO3 on certain boards with high capacitance on the
LDO3 output.

Similar features (or workarounds) have been also implemented
on u-boot side [1].

Changes since v1:
- Rebased on top of next and dropped already merged patches.
- Dropped LDO4 full range devicetree change for Lime2 (prev patch 9)
  in favor of general pin-bank regulator dependency [2].
- Fixed paths in devicetree bindings (patch 3)
- Added note about software based soft-start for LDO3 (patch 5)

[1] https://lists.denx.de/pipermail/u-boot/2018-November/348612.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-December/618459.html

Olliver Schinagl (8):
  mfd: axp20x: name voltage ramping define properly
  regulator: axp20x: add support for set_ramp_delay for AXP209
  dt-bindings: mfd: axp20x: add support for regulator-ramp-delay for AXP209
  regulator: axp20x: add software based soft_start for AXP209 LDO3
  dt-bindings: mfd: axp20x: Add software based soft_start for AXP209 LDO3
  regulator: dts: enable soft-start and ramp delay for the OLinuXino Lime2
  mfd: axp20x: Clean up included headers
  mfd: axp20x: use explicit bit defines

 Documentation/devicetree/bindings/mfd/axp20x.txt |   9 +-
 arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts  |   2 +-
 drivers/mfd/axp20x.c                             |  13 +-
 drivers/regulator/axp20x-regulator.c             | 142 +++++++++++++++-
 include/linux/mfd/axp20x.h                       |   4 +-
 5 files changed, 161 insertions(+), 9 deletions(-)

base-commit: 14cf8c1d5b90a0cf6a8ba51ef59db8da8c7a2622
-- 
git-series 0.9.1