Received: by 2002:ad5:474a:0:0:0:0:0 with SMTP id i10csp1758737imu; Sun, 16 Dec 2018 08:10:42 -0800 (PST) X-Google-Smtp-Source: AFSGD/VtgYxE77wgE6jnPLZOzDeVxy0wJa36vlcYd/TS3GVlfsouAP7aaAS5FKedGdLyPJ1Ujxow X-Received: by 2002:a63:d047:: with SMTP id s7mr9227909pgi.311.1544976642528; Sun, 16 Dec 2018 08:10:42 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1544976642; cv=none; d=google.com; s=arc-20160816; b=vxlLbK/INvb6Ea8eq0ObUhCABfA+EyRaeC5APXY55EUCtYKSdE8eBCgNj6GXs409rf 7eK5zAuJ3B3x1dT0vB/HjiUYVLuG3XF6GoNxM60ALFD3MPdM7lX0dkDax1FHYBJPGg1Q G7bDSM/anN4nsyg6eJIleUgNpjJq8VPXDubBoeU66w/ccqUoR8ifjZSVSvPurm6h+eZc ja4TwOjr9QY6BdhWNGNEOi7tunYLkw8rOhQWByr6zUBpi7OVbYksJ6tL1ziMDzm6qwhH VNirFnfGYy2aCV7Xf6nSwCh0z5GjYT5R3Xmy0GSmo8edRkVPyG1krUaPAFfvwDNpZHZV 0DCA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:user-agent:in-reply-to :content-disposition:mime-version:references:message-id:subject:cc :to:from:date:dkim-signature; bh=e6yppCnRJWaEY0nsD/Vprn+wt/0iRP9D2qRoprrYkr0=; b=v/697EG9szDE6oh72bRtidekIYSH7P5dQ57H55cjGQRrQSvA8Qy5sw3oFSQln8yG5H eyFBFQA52HUPcuS+83wd5PuXO2397sC/dQudW8IRNoXB0IomgUOAkjs1xRN4aiFBenNa ZlV7OItsR65o8yfz0NVyYwSWU3qsdVyvtYB1WL5ZMlh7WKAeG2tgLjxeZCEQJ2igEsPQ sNn9oUyDsEcQsEgEb0Y4YyqYVMAfejpRLEgQt5ZOeq3oexHCsBUF5oPoH5V+IpRf3N9j AK3aV16C5DAM6kJQnubDq02Mw1+v5UCP40rUpAiTZ26HupdqjbxbBv5Ep5enPQgckACV Yr9g== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@gmail.com header.s=20161025 header.b=ozi+WpwD; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=gmail.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id k12si8496277pgg.382.2018.12.16.08.10.26; Sun, 16 Dec 2018 08:10:42 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@gmail.com header.s=20161025 header.b=ozi+WpwD; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=QUARANTINE dis=NONE) header.from=gmail.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730690AbeLPQIK (ORCPT + 99 others); Sun, 16 Dec 2018 11:08:10 -0500 Received: from mail-lj1-f194.google.com ([209.85.208.194]:41572 "EHLO mail-lj1-f194.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729822AbeLPQIJ (ORCPT ); Sun, 16 Dec 2018 11:08:09 -0500 Received: by mail-lj1-f194.google.com with SMTP id k15-v6so8860286ljc.8; Sun, 16 Dec 2018 08:08:07 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=date:from:to:cc:subject:message-id:references:mime-version :content-disposition:in-reply-to:user-agent; bh=e6yppCnRJWaEY0nsD/Vprn+wt/0iRP9D2qRoprrYkr0=; b=ozi+WpwD+9R/+xM4Le/B2Yz1lU2gJz19H942nQ5BORDRtyPm83hdL/fQzVP8FU619u Sqnx+7L/dN19kRssQQ8Z/arwDB0Dbn1w9IkGPzAFqmxAozy+H4kEA8gwyzkwrG+756H3 hix1hnJ6jzx1fr2V1pF0IUTfq3cMm4H8u2Ydsz7MQqHDgk9y5nsxF0cVKnbsnfOycAx3 OdyW6VCE3IELDfNnT1VD0jptr546E1E/nOKQxSkiAxbos8B8w6fY4vUwZGSTEVIpzLAq MUE0RhxxupCjcp5cROVawoh+50i3qmCN70qU0w0l81xOQxD01LIT6xil1c69G6Rd14Xt cX9w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=e6yppCnRJWaEY0nsD/Vprn+wt/0iRP9D2qRoprrYkr0=; b=Ns1ae6Y2cR9gg/HiQQi33cn8otA0uTO8Nj7gVYrFLrEZ8m5udOFbdtpieyBUZIjVbn Xnaa0PvT1bHv/80FbT+ekYlkX1EDVJA8mD71Tq99nlJuesUTDNH0KzzOFTM/yKXxkSFP /payeF1I2+kS+eZbxRLyUXl9ZGWvbVUBxJPFgAmXZLOaUSLwPyKlyfhlGmUhzL5QqEtv J7wd8xxG0eN3N1WPROKcGpcb+kTBDDt1SpwoOcMTCFn8FZ67MPfjlESbF7GX05kIS4U2 WDMrAwYEPWYYc4yoCrPKB4ZaW3Jb6zdVeHOno0jAGAT3g9aTbiH/VmCtyukAJZLmawoi GNqg== X-Gm-Message-State: AA+aEWbA/uAD0IbiO9WeSJ4Oqw0eQ6DbB9lEIVeC9VE+OKGsY4G9jQEZ qaKz/ObFCM2V7W9I21yhNpnlAnpjGMc= X-Received: by 2002:a2e:29d7:: with SMTP id p84-v6mr5595291ljp.12.1544976486093; Sun, 16 Dec 2018 08:08:06 -0800 (PST) Received: from localhost (89-70-220-87.dynamic.chello.pl. [89.70.220.87]) by smtp.gmail.com with ESMTPSA id b69sm2154897lfl.28.2018.12.16.08.08.05 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Sun, 16 Dec 2018 08:08:05 -0800 (PST) Date: Sun, 16 Dec 2018 17:07:42 +0100 From: Tomasz Duszynski To: Jonathan Cameron Cc: Tomasz Duszynski , linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, robh+dt@kernel.org, a.brauchli@elementarea.net Subject: Re: [PATCH v4 2/3] iio: chemical: add support for Sensirion SPS30 sensor Message-ID: <20181216160741.GA9975@arch> References: <20181214182803.9006-1-tduszyns@gmail.com> <20181214182803.9006-3-tduszyns@gmail.com> <20181216131454.7aea6a95@archlinux> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <20181216131454.7aea6a95@archlinux> User-Agent: Mutt/1.11.1 (2018-12-01) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sun, Dec 16, 2018 at 01:14:54PM +0000, Jonathan Cameron wrote: > On Fri, 14 Dec 2018 19:28:02 +0100 > Tomasz Duszynski wrote: > > > Add support for Sensirion SPS30 particulate matter sensor. > > > > Signed-off-by: Tomasz Duszynski > One minor thing inline I'll fix whilst applying. > Please check I didn't mess it up though! > > Thanks, > > Jonathan > > > --- > > drivers/iio/chemical/Kconfig | 11 + > > drivers/iio/chemical/Makefile | 1 + > > drivers/iio/chemical/sps30.c | 406 ++++++++++++++++++++++++++++++++++ > > 3 files changed, 418 insertions(+) > > create mode 100644 drivers/iio/chemical/sps30.c > > > > diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig > > index b8e005be4f87..57832b4360e9 100644 > > --- a/drivers/iio/chemical/Kconfig > > +++ b/drivers/iio/chemical/Kconfig > > @@ -61,6 +61,17 @@ config IAQCORE > > iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds) > > sensors > > > > +config SPS30 > > + tristate "SPS30 particulate matter sensor" > > + depends on I2C > > + select CRC8 > > + help > > + Say Y here to build support for the Sensirion SPS30 particulate > > + matter sensor. > > + > > + To compile this driver as a module, choose M here: the module will > > + be called sps30. > > + > > config VZ89X > > tristate "SGX Sensortech MiCS VZ89X VOC sensor" > > depends on I2C > > diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile > > index 2f4c4ba4d781..9f42f4252151 100644 > > --- a/drivers/iio/chemical/Makefile > > +++ b/drivers/iio/chemical/Makefile > > @@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o > > obj-$(CONFIG_BME680_SPI) += bme680_spi.o > > obj-$(CONFIG_CCS811) += ccs811.o > > obj-$(CONFIG_IAQCORE) += ams-iaq-core.o > > +obj-$(CONFIG_SPS30) += sps30.o > > obj-$(CONFIG_VZ89X) += vz89x.o > > diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c > > new file mode 100644 > > index 000000000000..f1cea8699c78 > > --- /dev/null > > +++ b/drivers/iio/chemical/sps30.c > > @@ -0,0 +1,406 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +/* > > + * Sensirion SPS30 particulate matter sensor driver > > + * > > + * Copyright (c) Tomasz Duszynski > > + * > > + * I2C slave address: 0x69 > > + * > > + * TODO: > > + * - support for turning on fan cleaning > > + * - support for reading/setting auto cleaning interval > > + */ > > + > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +#define SPS30_CRC8_POLYNOMIAL 0x31 > > +/* max number of bytes needed to store PM measurements or serial string */ > > +#define SPS30_MAX_READ_SIZE 48 > > +/* sensor measures reliably up to 3000 ug / m3 */ > > +#define SPS30_MAX_PM 3000 > > + > > +/* SPS30 commands */ > > +#define SPS30_START_MEAS 0x0010 > > +#define SPS30_STOP_MEAS 0x0104 > > +#define SPS30_RESET 0xd304 > > +#define SPS30_READ_DATA_READY_FLAG 0x0202 > > +#define SPS30_READ_DATA 0x0300 > > +#define SPS30_READ_SERIAL 0xd033 > > + > > +enum { > > + PM1, > > + PM2P5, > > + PM4, > > + PM10, > > +}; > > + > > +struct sps30_state { > > + struct i2c_client *client; > > + /* > > + * Guards against concurrent access to sensor registers. > > + * Must be held whenever sequence of commands is to be executed. > > + */ > > + struct mutex lock; > > +}; > > + > > +DECLARE_CRC8_TABLE(sps30_crc8_table); > > + > > +static int sps30_write_then_read(struct sps30_state *state, u8 *txbuf, > > + int txsize, u8 *rxbuf, int rxsize) > > +{ > > + int ret; > > + > > + /* > > + * Sensor does not support repeated start so instead of > > + * sending two i2c messages in a row we just send one by one. > > + */ > > + ret = i2c_master_send(state->client, txbuf, txsize); > > + if (ret != txsize) > > + return ret < 0 ? ret : -EIO; > > + > > + if (!rxbuf) > > + return 0; > > + > > + ret = i2c_master_recv(state->client, rxbuf, rxsize); > > + if (ret != rxsize) > > + return ret < 0 ? ret : -EIO; > > + > > + return 0; > > +} > > + > > +static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size) > > +{ > > + /* > > + * Internally sensor stores measurements in a following manner: > > + * > > + * PM1: upper two bytes, crc8, lower two bytes, crc8 > > + * PM2P5: upper two bytes, crc8, lower two bytes, crc8 > > + * PM4: upper two bytes, crc8, lower two bytes, crc8 > > + * PM10: upper two bytes, crc8, lower two bytes, crc8 > > + * > > + * What follows next are number concentration measurements and > > + * typical particle size measurement which we omit. > > + */ > > + u8 buf[SPS30_MAX_READ_SIZE] = { cmd >> 8, cmd }; > > + int i, ret = 0; > > + > > + switch (cmd) { > > + case SPS30_START_MEAS: > > + buf[2] = 0x03; > > + buf[3] = 0x00; > > + buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE); > > + ret = sps30_write_then_read(state, buf, 5, NULL, 0); > > + break; > > + case SPS30_STOP_MEAS: > > + case SPS30_RESET: > > + ret = sps30_write_then_read(state, buf, 2, NULL, 0); > > + break; > > + case SPS30_READ_DATA_READY_FLAG: > > + case SPS30_READ_DATA: > > + case SPS30_READ_SERIAL: > > + /* every two data bytes are checksummed */ > > + size += size / 2; > > + ret = sps30_write_then_read(state, buf, 2, buf, size); > > + break; > > + } > > + > > + if (ret) > > + return ret; > > + > > + /* validate received data and strip off crc bytes */ > > + for (i = 0; i < size; i += 3) { > > + u8 crc = crc8(sps30_crc8_table, &buf[i], 2, CRC8_INIT_VALUE); > > + > > + if (crc != buf[i + 2]) { > > + dev_err(&state->client->dev, > > + "data integrity check failed\n"); > > + return -EIO; > > + } > > + > > + *data++ = buf[i]; > > + *data++ = buf[i + 1]; > > + } > > + > > + return 0; > > +} > > + > > +static int sps30_float_to_int_clamped(const u8 *fp) > > +{ > > + int val = get_unaligned_be32(fp); > > + int mantissa = val & GENMASK(22, 0); > > + /* this is fine since passed float is always non-negative */ > > + int exp = val >> 23; > > + int fraction, shift; > > + > > + /* special case 0 */ > > + if (!exp && !mantissa) > > + return 0; > > + > > + exp -= 127; > > + if (exp < 0) { > > + /* return values ranging from 1 to 99 */ > > + return ((((1 << 23) + mantissa) * 100) >> 23) >> (-exp); > > + } > > + > > + /* return values ranging from 100 to 300000 */ > > + shift = 23 - exp; > > + val = (1 << exp) + (mantissa >> shift); > > + if (val >= SPS30_MAX_PM) > > + return SPS30_MAX_PM * 100; > > + > > + fraction = mantissa & GENMASK(shift - 1, 0); > > + > > + return val * 100 + ((fraction * 100) >> shift); > > +} > > + > > +static int sps30_do_meas(struct sps30_state *state, int *data, int size) > > +{ > > + int i, ret, tries = 5; > > + u8 tmp[16]; > > + > > + while (tries--) { > > + ret = sps30_do_cmd(state, SPS30_READ_DATA_READY_FLAG, tmp, 2); > > + if (ret) > > + return -EIO; > > + > > + /* new measurements ready to be read */ > > + if (tmp[1] == 1) > > + break; > > + > > + msleep_interruptible(300); > > + } > > + > > + if (!tries) > > + return -ETIMEDOUT; > > + > > + ret = sps30_do_cmd(state, SPS30_READ_DATA, tmp, sizeof(int) * size); > > + if (ret) > > + return ret; > > + > > + for (i = 0; i < size; i++) > > + data[i] = sps30_float_to_int_clamped(&tmp[4 * i]); > > + > > + return 0; > > +} > > + > > +static irqreturn_t sps30_trigger_handler(int irq, void *p) > > +{ > > + struct iio_poll_func *pf = p; > > + struct iio_dev *indio_dev = pf->indio_dev; > > + struct sps30_state *state = iio_priv(indio_dev); > > + int ret, data[4 + 2]; /* PM1, PM2P5, PM4, PM10, timestamp */ > > Totally trivial and I'll fix it, but data should be a fixed > width data type, not an int. s32 will do nicely. > Good. Thanks. > > > + > > + mutex_lock(&state->lock); > > + ret = sps30_do_meas(state, data, 4); > > + mutex_unlock(&state->lock); > > + if (ret) > > + goto err; > > + > > + iio_push_to_buffers_with_timestamp(indio_dev, data, > > + iio_get_time_ns(indio_dev)); > > +err: > > + iio_trigger_notify_done(indio_dev->trig); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int sps30_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct sps30_state *state = iio_priv(indio_dev); > > + int data[4], ret = -EINVAL; > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_PROCESSED: > > + switch (chan->type) { > > + case IIO_MASSCONCENTRATION: > > + mutex_lock(&state->lock); > > + /* read up to the number of bytes actually needed */ > > + switch (chan->channel2) { > > + case IIO_MOD_PM1: > > + ret = sps30_do_meas(state, data, 1); > > + break; > > + case IIO_MOD_PM2P5: > > + ret = sps30_do_meas(state, data, 2); > > + break; > > + case IIO_MOD_PM4: > > + ret = sps30_do_meas(state, data, 3); > > + break; > > + case IIO_MOD_PM10: > > + ret = sps30_do_meas(state, data, 4); > > + break; > > + } > > + mutex_unlock(&state->lock); > > + if (ret) > > + return ret; > > + > > + *val = data[chan->address] / 100; > > + *val2 = (data[chan->address] % 100) * 10000; > > + > > + return IIO_VAL_INT_PLUS_MICRO; > > + default: > > + return -EINVAL; > > + } > > + case IIO_CHAN_INFO_SCALE: > > + switch (chan->type) { > > + case IIO_MASSCONCENTRATION: > > + switch (chan->channel2) { > > + case IIO_MOD_PM1: > > + case IIO_MOD_PM2P5: > > + case IIO_MOD_PM4: > > + case IIO_MOD_PM10: > > + *val = 0; > > + *val2 = 10000; > > + > > + return IIO_VAL_INT_PLUS_MICRO; > > + } > > + default: > > + return -EINVAL; > > + } > > + } > > + > > + return -EINVAL; > > +} > > + > > +static const struct iio_info sps30_info = { > > + .read_raw = sps30_read_raw, > > +}; > > + > > +#define SPS30_CHAN(_index, _mod) { \ > > + .type = IIO_MASSCONCENTRATION, \ > > + .modified = 1, \ > > + .channel2 = IIO_MOD_ ## _mod, \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > > + .address = _mod, \ > > + .scan_index = _index, \ > > + .scan_type = { \ > > + .sign = 'u', \ > > + .realbits = 19, \ > > + .storagebits = 32, \ > > + .endianness = IIO_CPU, \ > > + }, \ > > +} > > + > > +static const struct iio_chan_spec sps30_channels[] = { > > + SPS30_CHAN(0, PM1), > > + SPS30_CHAN(1, PM2P5), > > + SPS30_CHAN(2, PM4), > > + SPS30_CHAN(3, PM10), > > + IIO_CHAN_SOFT_TIMESTAMP(4), > > +}; > > + > > +static void sps30_stop_meas(void *data) > > +{ > > + struct sps30_state *state = data; > > + > > + sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0); > > +} > > + > > +static const unsigned long sps30_scan_masks[] = { 0x0f, 0x00 }; > > + > > +static int sps30_probe(struct i2c_client *client) > > +{ > > + struct iio_dev *indio_dev; > > + struct sps30_state *state; > > + u8 buf[32]; > > + int ret; > > + > > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) > > + return -EOPNOTSUPP; > > + > > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state)); > > + if (!indio_dev) > > + return -ENOMEM; > > + > > + state = iio_priv(indio_dev); > > + i2c_set_clientdata(client, indio_dev); > > + state->client = client; > > + indio_dev->dev.parent = &client->dev; > > + indio_dev->info = &sps30_info; > > + indio_dev->name = client->name; > > + indio_dev->channels = sps30_channels; > > + indio_dev->num_channels = ARRAY_SIZE(sps30_channels); > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->available_scan_masks = sps30_scan_masks; > > + > > + mutex_init(&state->lock); > > + crc8_populate_msb(sps30_crc8_table, SPS30_CRC8_POLYNOMIAL); > > + > > + ret = sps30_do_cmd(state, SPS30_RESET, NULL, 0); > > + if (ret) { > > + dev_err(&client->dev, "failed to reset device\n"); > > + return ret; > > + } > > + msleep(300); > > + /* > > + * Power-on-reset causes sensor to produce some glitch on i2c bus and > > + * some controllers end up in error state. Recover simply by placing > > + * some data on the bus, for example STOP_MEAS command, which > > + * is NOP in this case. > > + */ > > + sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0); > > + > > + ret = sps30_do_cmd(state, SPS30_READ_SERIAL, buf, sizeof(buf)); > > + if (ret) { > > + dev_err(&client->dev, "failed to read serial number\n"); > > + return ret; > > + } > > + /* returned serial number is already NUL terminated */ > > + dev_info(&client->dev, "serial number: %s\n", buf); > > + > > + ret = sps30_do_cmd(state, SPS30_START_MEAS, NULL, 0); > > + if (ret) { > > + dev_err(&client->dev, "failed to start measurement\n"); > > + return ret; > > + } > > + > > + ret = devm_add_action_or_reset(&client->dev, sps30_stop_meas, state); > > + if (ret) > > + return ret; > > + > > + ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL, > > + sps30_trigger_handler, NULL); > > + if (ret) > > + return ret; > > + > > + return devm_iio_device_register(&client->dev, indio_dev); > > +} > > + > > +static const struct i2c_device_id sps30_id[] = { > > + { "sps30" }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(i2c, sps30_id); > > + > > +static const struct of_device_id sps30_of_match[] = { > > + { .compatible = "sensirion,sps30" }, > > + { } > > +}; > > +MODULE_DEVICE_TABLE(of, sps30_of_match); > > + > > +static struct i2c_driver sps30_driver = { > > + .driver = { > > + .name = "sps30", > > + .of_match_table = sps30_of_match, > > + }, > > + .id_table = sps30_id, > > + .probe_new = sps30_probe, > > +}; > > +module_i2c_driver(sps30_driver); > > + > > +MODULE_AUTHOR("Tomasz Duszynski "); > > +MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver"); > > +MODULE_LICENSE("GPL v2"); >