Subject: Re: 2.6.1 on ATI Rage 128 M3: some thin vertical lines show up
From: Andreas Oberritter <obi@saftware.de>
To: linux-kernel@vger.kernel.org
In-Reply-To: <401034E6.70703@t-online.de>
References: <401034E6.70703@t-online.de>
Content-Type: text/plain
Message-Id: <1074805972.2081.85.camel@shiva.eth.saftware.de>
Mime-Version: 1.0
Date: Thu, 22 Jan 2004 22:12:52 +0100
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1225
Lines: 28

On Thu, 2004-01-22 at 21:39, Harald Dunkel wrote:
> Kernel: plain 2.6.1, booted with "vga=0x318"
> Hardware: Dell C600 laptop
> VGA: VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
>       (XFree86 says '"ATI Rage 128 Mobility M3 LF (AGP)" (ChipID = 0x4c46)')
> 
> If I run "make menuconfig" on the frame buffer console,
> then some character cells (e.g. the top line to the right
> of "Linux Kernel v2.6.1 Configuration") contain some thin
> vertical lines in various colors instead of being plain blue.
[...]
> I can't remember having seen this problem with kernel 2.4.22,
> but please don't count on this.

Just to clarify, are you talking about vesafb? I ask, because the
rage128 driver included in the kernel does not support flat panels.
That's the reason why I started a new driver for my Dell C600, which I
haven't ported to 2.6 yet (volunteers are welcome, see
http://www.saftware.de/r128fb/r128fb-20030819.tar.bz2 ;-).

Regards,
Andreas

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/