Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265206AbUAYTXb (ORCPT ); Sun, 25 Jan 2004 14:23:31 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265209AbUAYTXa (ORCPT ); Sun, 25 Jan 2004 14:23:30 -0500 Received: from intra.cyclades.com ([64.186.161.6]:10966 "EHLO intra.cyclades.com") by vger.kernel.org with ESMTP id S265206AbUAYTXJ (ORCPT ); Sun, 25 Jan 2004 14:23:09 -0500 Date: Sun, 25 Jan 2004 17:20:46 -0200 (BRST) From: Marcelo Tosatti X-X-Sender: marcelo@logos.cnet To: "Gabor Z. Papp" Cc: Marcelo Tosatti , linux-kernel@vger.kernel.org, Bartlomiej Zolnierkiewicz Subject: Re: Linux 2.4.25-pre7 - no DRQ after issuing WRITE In-Reply-To: Message-ID: References: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1862 Lines: 53 On Sun, 25 Jan 2004, Gabor Z. Papp wrote: > * Marcelo Tosatti : > > | Please help testing! :) > > Here we go: http://gzp.odpn.net/tmp/linux-2.4.25-pre7/ > > The "no DRQ after issuing WRITE" problem with 2 120GB Seagate > harddisk. I don't think its hw problem, because these disks are fine > in other environment. More "load" related, without running them in sw > raid mode, the problem doesn't hit me so quickly. Hi Gabor, I'm not IDE expert, but these errors look like hardware fault for me (Bartlomiej CCed). What about 2.6 and older 2.4 kernels on the same hardware ? ------------- Mounted devfs on /dev Freeing unused kernel memory: 116k freed hde: dma_timer_expiry: dma status == 0x21 hdg: dma_timer_expiry: dma status == 0x21 hde: error waiting for DMA hde: dma timeout retry: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error } hde: dma timeout retry: error=0x7f { DriveStatusError UncorrectableError SectorIdNotFound TrackZeroNotFound AddrMarkNotFound }, LBAsect=9343692930943, high=556927, low=8355711, sector=4352 hde: DMA disabled hdg: error waiting for DMA hdg: dma timeout retry: status=0x58 { DriveReady SeekComplete DataRequest } hdg: status error: status=0x50 { DriveReady SeekComplete } hdg: no DRQ after issuing MULTWRITE hdg: status timeout: status=0xd0 { Busy } > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/