Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265375AbUAZBds (ORCPT ); Sun, 25 Jan 2004 20:33:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265420AbUAZBds (ORCPT ); Sun, 25 Jan 2004 20:33:48 -0500 Received: from main.gmane.org ([80.91.224.249]:60802 "EHLO main.gmane.org") by vger.kernel.org with ESMTP id S265375AbUAZBcp (ORCPT ); Sun, 25 Jan 2004 20:32:45 -0500 X-Injected-Via-Gmane: http://gmane.org/ To: linux-kernel@vger.kernel.org From: Mike Subject: Re: 2.6.1-mm5, kernel panic "Interrupt not syncing" Date: Sun, 25 Jan 2004 20:32:39 -0500 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT X-Complaints-To: usenet@sea.gmane.org User-Agent: Pan/0.14.0 (I'm Being Nibbled to Death by Cats!) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 38426 Lines: 1434 On Sun, 25 Jan 2004 10:24:29 -0500, Zwane Mwaikambo wrote: > On Sun, 25 Jan 2004, Mike wrote: > >> On Fri, 23 Jan 2004 09:58:40 -0500, Mike wrote: >> >> > I have run 2.6.0-test.* kernels, 2.6.1-mm1 and 4 and they all boot >> > fine. When I go to 2.6.1-mm5 I get a kernel panic and the boot >> > freezes. The messages go by so quick I can't tell at what point it is >> > doing this but the last line is interrupt not syncing. Any ideas? I >> > have gone back to 2.6.1-mm4 so I can boot but I was interested in mm5 >> > because it has ALSA 1.01 and I was hoping that would solve my lockup >> > when I got to a web page with a lot of flash problem but not being >> > able to boot is even worse. :-) >> > >> > Any ideas on the problem or advice on how to debug this would be most >> > appreciated. >> > >> > Mike >> No ideas? I can wait to try a newer kernel but I am concerned that the >> 20 or so kernels I used before booted without problems then all of a >> sudden 2.6.1-mm5 does not. Should I just ignore the problem and try a >> newer kernel? Is anyone else using 2.6.1-mm5 successfully? > > Kernel config please? Could you perhaps manage to get a tad bit more > information from the panic? Also send over a dmesg from a working boot. > > Ta Thank you so much for offering to help. The last message is: "<0> Kernel panic: fatal exception in interrupt In interrupt handler - not syncing" Before that there is Code: and then a bunch of bytes. I didn't copy those down. Do you want to see them? Before that is a stack trace? It fills more than one screen so I don't get it all but from the top of what I can see the calls are: send_sig update_one_process update_process_time do_timer timer_interrupt handle_irq_event do_IRQ common_interrupt generic_ide_resume kallsyms_lookup preempt_schedule preempt_schedule __print_symbol The rest of the calls appear to be the calls it is using to write the error to the console. Unless I have this backwards? This is my dmesg from this current (2.6.1-mm4) boot: Linux version 2.6.1-mm4 (root@Jacob) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #1 Sun Jan 18 20:29:19 EST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ee000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 511MB LOWMEM available. zapping low mappings. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Built 1 zonelists current: c040ca60 current->thread_info: c048c000 Initializing CPU#0 Kernel command line: root=/dev/hda3 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1460.855 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 514288k/524224k available (2695k kernel code, 9188k reserved, 934k data, 144k init, 0k highmem) Calibrating delay loop... 2891.77 BogoMIPS Security Scaffold v1.0.0 initialized Capability LSM initialized Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1700+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: the driver 'system' has been registered PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00f7350 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5e07, dseg 0xf0000 pnp: match found with the PnP device '00:01' and the driver 'system' PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver SCSI subsystem initialized Linux Kernel Card Services options: [pci] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router SIS [1039/0008] at 0000:00:02.0 Machine check exception polling timer started. ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 NTFS driver 2.1.5 [Flags: R/W]. udf: registering filesystem Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found pty: 256 Unix98 ptys configured Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected SiS 735 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 64M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:09' and the driver 'serial' pnp: match found with the PnP device '00:0a' and the driver 'serial' Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sis900.c: v1.08.07 11/02/2003 PCI: Found IRQ 10 for device 0000:00:03.0 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 10, 00:07:95:b1:df:04. netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hda: MAXTOR 6L040J2, ATA DISK drive hdb: WDC AC26400B, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-ROM SR-8582, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 pnp: the driver 'ide' has been registered hda: max request size: 128KiB hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 hdb: max request size: 128KiB hdb: 12594960 sectors (6448 MB) w/512KiB Cache, CHS=13328/15/63, UDMA(33) /dev/ide/host0/bus0/target1/lun0: p1 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 PCI: Found IRQ 10 for device 0000:00:02.2 ohci_hcd 0000:00:02.2: OHCI Host Controller ohci_hcd 0000:00:02.2: irq 10, pci mem e081a000 ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected PCI: Found IRQ 5 for device 0000:00:02.3 ohci_hcd 0000:00:02.3: OHCI Host Controller ohci_hcd 0000:00:02.3: irq 5, pci mem e081c000 ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Advanced Linux Sound Architecture Driver Version 1.0.1 (Tue Dec 30 10:04:14 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 ALSA device list: No soundcards found. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 BIOS EDD facility v0.10 2003-Oct-11, 2 devices found Please report your BIOS at http://domsch.com/linux/edd30/results.html found reiserfs format "3.6" with standard journal hub 2-0:1.0: new USB device on port 1, assigned address 2 hub 2-1:1.0: USB hub found hub 2-1:1.0: 7 ports detected hub 2-1:1.0: new USB device on port 1, assigned address 3 Reiserfs journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda3) for (hda3) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 144k freed hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g3 .D USB FW:g3] on usb-0000:00:02.3-1.1 hub 2-1:1.0: new USB device on port 2, assigned address 4 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 Adding 771112k swap on /dev/hda2. Priority:-1 extents:1 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda4) for (hda4) Using r5 hash to sort names PCI: Found IRQ 10 for device 0000:00:02.7 intel8x0_measure_ac97_clock: measured 49475 usecs intel8x0: clocking to 48000 Disabled Privacy Extensions on device c044d6e0(lo) process `named' is using obsolete setsockopt SO_BSDCOMPAT eth0: Media Link On 100mbps full-duplex smbfs: Unrecognized mount option noexec smbfs: Unrecognized mount option noexec smbfs: Unrecognized mount option noexec smbfs: Unrecognized mount option noexec eth0: no IPv6 routers present nvidia: no version magic, tainting kernel. nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-5328 Wed Dec 17 13:54:51 PST 2003 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). cdrom: This disc doesn't have any tracks I recognize! ************************************************************************* This the config I am trying to use for 2.6.1-mm5 which is exactly the one from 2.6.1-mm4 after I have run make oldconfig # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set # CONFIG_STANDALONE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # # Processor support # # # Select all processors your kernel should support # # CONFIG_CPU_386 is not set # CONFIG_CPU_486 is not set CONFIG_CPU_586=y # CONFIG_CPU_586TSC is not set # CONFIG_CPU_586MMX is not set # CONFIG_CPU_686 is not set # CONFIG_CPU_PENTIUMII is not set # CONFIG_CPU_PENTIUMIII is not set # CONFIG_CPU_PENTIUMM is not set # CONFIG_CPU_PENTIUM4 is not set # CONFIG_CPU_K6 is not set CONFIG_CPU_K7=y # CONFIG_CPU_K8 is not set # CONFIG_CPU_CRUSOE is not set # CONFIG_CPU_WINCHIPC6 is not set # CONFIG_CPU_WINCHIP2 is not set # CONFIG_CPU_WINCHIP3D is not set # CONFIG_CPU_CYRIXIII is not set # CONFIG_CPU_VIAC3_2 is not set CONFIG_CPU_ONLY_K7=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_3DNOW=y # CONFIG_X86_4G is not set # CONFIG_X86_SWITCH_PAGETABLES is not set # CONFIG_X86_4G_VM_LAYOUT is not set # CONFIG_X86_UACCESS_INDIRECT is not set # CONFIG_X86_HIGH_ENTRY is not set # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y # CONFIG_X86_UP_APIC is not set CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_EDD=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y # CONFIG_REGPARM is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # # CONFIG_ACPI is not set # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # CONFIG_PCMCIA=y # CONFIG_PCMCIA_COMPAT is not set # CONFIG_YENTA is not set # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # CONFIG_FW_LOADER=y # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # CONFIG_PNP=y CONFIG_PNP_DEBUG=y # # Protocols # CONFIG_ISAPNP=y CONFIG_PNPBIOS=y CONFIG_PNPBIOS_PROC_FS=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPNP=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set CONFIG_BLK_DEV_SIS5513=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_IDE_CHIPSETS=y # # Note: most of these also require special kernel boot parameters # CONFIG_BLK_DEV_4DRIVES=y # CONFIG_BLK_DEV_ALI14XX is not set # CONFIG_BLK_DEV_DTC2278 is not set # CONFIG_BLK_DEV_HT6560B is not set # CONFIG_BLK_DEV_PDC4030 is not set # CONFIG_BLK_DEV_QD65XX is not set # CONFIG_BLK_DEV_UMC8672 is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_MAX_SD_DISKS=256 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_REPORT_LUNS is not set CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AHA1542 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX_CONFIG=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA23XX is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # PCMCIA SCSI adapter support # # CONFIG_PCMCIA_AHA152X is not set # CONFIG_PCMCIA_FDOMAIN is not set # CONFIG_PCMCIA_NINJA_SCSI is not set # CONFIG_PCMCIA_QLOGIC is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set CONFIG_INET_AH=y CONFIG_INET_ESP=y CONFIG_INET_IPCOMP=y # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y CONFIG_IPV6_TUNNEL=y # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m # CONFIG_IP_NF_MATCH_LIMIT is not set CONFIG_IP_NF_MATCH_IPRANGE=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_RECENT=m # CONFIG_IP_NF_MATCH_ECN is not set # CONFIG_IP_NF_MATCH_DSCP is not set # CONFIG_IP_NF_MATCH_AH_ESP is not set CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m # CONFIG_IP_NF_MATCH_TCPMSS is not set # CONFIG_IP_NF_MATCH_OWNER is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_MANGLE is not set CONFIG_IP_NF_TARGET_LOG=m # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_TARGET_TCPMSS is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # # IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_LIMIT=m CONFIG_IP6_NF_MATCH_MAC=m CONFIG_IP6_NF_MATCH_RT=m # CONFIG_IP6_NF_MATCH_OPTS is not set # CONFIG_IP6_NF_MATCH_FRAG is not set # CONFIG_IP6_NF_MATCH_HL is not set CONFIG_IP6_NF_MATCH_MULTIPORT=m CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m # CONFIG_IP6_NF_MATCH_AHESP is not set # CONFIG_IP6_NF_MATCH_LENGTH is not set # CONFIG_IP6_NF_MATCH_EUI64 is not set CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_LOG is not set # CONFIG_IP6_NF_MANGLE is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_CS89x0 is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set CONFIG_SIS900=y # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # # Wan interfaces # # CONFIG_WAN is not set # # PCMCIA network device support # # CONFIG_NET_PCMCIA is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # CONFIG_KGDBOE is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set CONFIG_SERIO_PCIPS2=y # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set # CONFIG_MOUSE_PC110PAD is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=y # CONFIG_INPUT_UINPUT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_RSA is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set CONFIG_AGP_AMD=y # CONFIG_AGP_AMD64 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set CONFIG_AGP_SIS=y # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=y CONFIG_DRM=y CONFIG_DRM_TDFX=y # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # I2C support # # CONFIG_I2C is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # # CONFIG_FB is not set CONFIG_VIDEO_SELECT=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y CONFIG_SND_SEQ_DUMMY=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_VERBOSE_PRINTK is not set CONFIG_SND_DEBUG=y # CONFIG_SND_DEBUG_MEMORY is not set # CONFIG_SND_DEBUG_DETECT is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m # # ISA devices # # CONFIG_SND_AD1816A is not set # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES968 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_ALS100 is not set # CONFIG_SND_AZT2320 is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_DT019X is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=m # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_VXP440 is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_UHCI_HCD is not set # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=m # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y CONFIG_DEVPTS_FS_XATTR=y # CONFIG_DEVPTS_FS_SECURITY is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_FRAME_POINTER is not set # # Security options # CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_SELINUX is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_TEST is not set # # Library routines # CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y Thx again for the help kr Mike - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/