Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <1547134822-18498-1-git-send-email-lollivier@baylibre.com>
In-Reply-To: <1547134822-18498-1-git-send-email-lollivier@baylibre.com>
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Fri, 11 Jan 2019 20:46:46 +0100
Message-ID: <CAFBinCDM4BTx0Ude-M=O6B2bXPE9EdfD=VxZfFzR9Dc=yT+xWQ@mail.gmail.com>
Subject: Re: [PATCH v3] arm64: dts: meson: Fix mmc cd-gpios polarity
To:     Loys Ollivier <lollivier@baylibre.com>
Cc:     devicetree@vger.kernel.org, Kevin Hilman <khilman@baylibre.com>,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-mmc@vger.kernel.org,
        Linus Walleij <linus.walleij@linaro.org>,
        Jerome Brunet <jbrunet@baylibre.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

some nit-picks as well as my Tested-by (in case it's not too late) below.
thank you for taking care of this!

On Thu, Jan 10, 2019 at 4:40 PM Loys Ollivier <lollivier@baylibre.com> wrote:
>
> Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
> changed the behavior of "cd-inverted" to follow the device tree bindings
> specification.
> Lines specifying "cd-inverted" are now "active high".
this depends on the polarity from the cd-gpios property. above commit
caused cd-inverted to be applied twice (effectively making it a
no-op). thus "cd-inverted" only means "active high" if cd-gpios also
sets GPIO_ACTIVE_HIGH. if the polarity in cd-gpios is GPIO_ACTIVE_LOW
together with "cd-inverted" then the GPIO will be treated as active
low.

> Fix the SD card for meson by setting the cd-gpios as "active low" according
> to the boards specifications.
not only switching to GPIO_ACTIVE_LOW, also dropping "cd-inverted"

> Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree")
in my patches for the 32-bit boards I used the commit which added SD
card support to the board for the Fixes tag. however, I'm fine with
this as well (I just wanted to point out that there's a small
difference in our commits).

> Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
on my Khadas VIM(1), using Kevin's v5.0/fixes branch:
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>


Regards
Martin