Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Stefan Agner <stefan@agner.ch>
To:     shawnguo@kernel.org, s.hauer@pengutronix.de
Cc:     max.krummenacher@toradex.com, marcel.ziswiler@toradex.com,
        dev@pschenker.ch, kernel@pengutronix.de, fabio.estevam@nxp.com,
        linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH] ARM: dts: imx6qdl-apalis: add phy-supply
Date:   Fri, 18 Jan 2019 14:32:18 +0100
Message-Id: <20190118133218.19917-1-stefan@agner.ch>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Use the VDD I/O rail as phy-supply regulator. Technically, the
regulator has multiple rails, but currently the driver only
supports a single phy-supply. The VDD I/O rail has the highest
power consumption when software power down is used and hence
the highest saving potential.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/boot/dts/imx6qdl-apalis.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 0b47aecf336a..cf66f9ececbd 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -241,6 +241,7 @@
 	phy-handle = <&ethphy>;
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen5_reg>;
 	status = "okay";
 
 	mdio {
-- 
2.20.1