Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Sat, 19 Jan 2019 18:08:43 +0000
From:   Jonathan Cameron <jic23@kernel.org>
To:     Tomer Maimon <tmaimon77@gmail.com>
Cc:     knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
        robh+dt@kernel.org, mark.rutland@arm.com, yuenn@google.com,
        venture@google.com, brendanhiggins@google.com,
        avifishman70@gmail.com, joel@jms.id.au, linux-iio@vger.kernel.org,
        openbmc@lists.ozlabs.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org
Subject: Re: [PATCH v3 2/2] iio: adc: add NPCM ADC driver
Message-ID: <20190119180843.78510580@archlinux>
In-Reply-To: <20190116164855.200357-3-tmaimon77@gmail.com>
References: <20190116164855.200357-1-tmaimon77@gmail.com>
        <20190116164855.200357-3-tmaimon77@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Wed, 16 Jan 2019 18:48:55 +0200
Tomer Maimon <tmaimon77@gmail.com> wrote:

> Add Nuvoton NPCM BMC Analog-to-Digital Converter(ADC) driver.
> 
> The NPCM ADC is a 10-bit converter for eight channel inputs.
> 
> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
One trivial ordering in remove oddity that I'll just fix up.
Also, I don't particularly like printing a message on success
as it's not providing any useful info.  Hmm. I don't care
strongly enough to remove it though.

Applied to the togreg branch of iio.git and pushed out as
testing for the autobuilders to play with it.

Thanks,

Jonathan

> ---
>  drivers/iio/adc/Kconfig    |  10 ++
>  drivers/iio/adc/Makefile   |   1 +
>  drivers/iio/adc/npcm_adc.c | 335 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 346 insertions(+)
>  create mode 100644 drivers/iio/adc/npcm_adc.c
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 7a3ca4ec0cb7..2d1e70a7d5c4 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -576,6 +576,16 @@ config NAU7802
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called nau7802.
>  
> +config NPCM_ADC
> +	tristate "Nuvoton NPCM ADC driver"
> +	depends on ARCH_NPCM || COMPILE_TEST
> +	depends on HAS_IOMEM
> +	help
> +	  Say yes here to build support for Nuvoton NPCM ADC.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called npcm_adc.
> +
>  config PALMAS_GPADC
>  	tristate "TI Palmas General Purpose ADC"
>  	depends on MFD_PALMAS
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 07df37f621bd..3337eb1f4c30 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -55,6 +55,7 @@ obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
>  obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
>  obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
>  obj-$(CONFIG_NAU7802) += nau7802.o
> +obj-$(CONFIG_NPCM_ADC) += npcm_adc.o
>  obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
>  obj-$(CONFIG_QCOM_SPMI_ADC5) += qcom-spmi-adc5.o
>  obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
> diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
> new file mode 100644
> index 000000000000..1cc377cdf1f7
> --- /dev/null
> +++ b/drivers/iio/adc/npcm_adc.c
> @@ -0,0 +1,335 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2019 Nuvoton Technology corporation.
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/io.h>
> +#include <linux/iio/iio.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spinlock.h>
> +#include <linux/uaccess.h>
> +
> +struct npcm_adc {
> +	bool int_status;
> +	u32 adc_sample_hz;
> +	struct device *dev;
> +	void __iomem *regs;
> +	struct clk *adc_clk;
> +	wait_queue_head_t wq;
> +	struct regulator *vref;
> +	struct regmap *rst_regmap;
> +};
> +
> +/* NPCM7xx reset module */
> +#define NPCM7XX_IPSRST1_OFFSET		0x020
> +#define NPCM7XX_IPSRST1_ADC_RST		BIT(27)
> +
> +/* ADC registers */
> +#define NPCM_ADCCON	 0x00
> +#define NPCM_ADCDATA	 0x04
> +
> +/* ADCCON Register Bits */
> +#define NPCM_ADCCON_ADC_INT_EN		BIT(21)
> +#define NPCM_ADCCON_REFSEL		BIT(19)
> +#define NPCM_ADCCON_ADC_INT_ST		BIT(18)
> +#define NPCM_ADCCON_ADC_EN		BIT(17)
> +#define NPCM_ADCCON_ADC_RST		BIT(16)
> +#define NPCM_ADCCON_ADC_CONV		BIT(13)
> +
> +#define NPCM_ADCCON_CH_MASK		GENMASK(27, 24)
> +#define NPCM_ADCCON_CH(x)		((x) << 24)
> +#define NPCM_ADCCON_DIV_SHIFT		1
> +#define NPCM_ADCCON_DIV_MASK		GENMASK(8, 1)
> +#define NPCM_ADC_DATA_MASK(x)		((x) & GENMASK(9, 0))
> +
> +#define NPCM_ADC_ENABLE		(NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
> +
> +/* ADC General Definition */
> +#define NPCM_RESOLUTION_BITS		10
> +#define NPCM_INT_VREF_MV		2000
> +
> +#define NPCM_ADC_CHAN(ch) {					\
> +	.type = IIO_VOLTAGE,					\
> +	.indexed = 1,						\
> +	.channel = ch,						\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
> +				BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
> +}
> +
> +static const struct iio_chan_spec npcm_adc_iio_channels[] = {
> +	NPCM_ADC_CHAN(0),
> +	NPCM_ADC_CHAN(1),
> +	NPCM_ADC_CHAN(2),
> +	NPCM_ADC_CHAN(3),
> +	NPCM_ADC_CHAN(4),
> +	NPCM_ADC_CHAN(5),
> +	NPCM_ADC_CHAN(6),
> +	NPCM_ADC_CHAN(7),
> +};
> +
> +static irqreturn_t npcm_adc_isr(int irq, void *data)
> +{
> +	u32 regtemp;
> +	struct iio_dev *indio_dev = data;
> +	struct npcm_adc *info = iio_priv(indio_dev);
> +
> +	regtemp = ioread32(info->regs + NPCM_ADCCON);
> +	if (regtemp & NPCM_ADCCON_ADC_INT_ST) {
> +		iowrite32(regtemp, info->regs + NPCM_ADCCON);
> +		wake_up_interruptible(&info->wq);
> +		info->int_status = true;
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
> +{
> +	int ret;
> +	u32 regtemp;
> +
> +	/* Select ADC channel */
> +	regtemp = ioread32(info->regs + NPCM_ADCCON);
> +	regtemp &= ~NPCM_ADCCON_CH_MASK;
> +	info->int_status = false;
> +	iowrite32(regtemp | NPCM_ADCCON_CH(channel) |
> +		  NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
> +
> +	ret = wait_event_interruptible_timeout(info->wq, info->int_status,
> +					       msecs_to_jiffies(10));
> +	if (ret == 0) {
> +		regtemp = ioread32(info->regs + NPCM_ADCCON);
> +		if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
> +			/* if conversion failed - reset ADC module */
> +			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
> +				     NPCM7XX_IPSRST1_ADC_RST);
> +			msleep(100);
> +			regmap_write(info->rst_regmap, NPCM7XX_IPSRST1_OFFSET,
> +				     0x0);
> +			msleep(100);
> +
> +			/* Enable ADC and start conversion module */
> +			iowrite32(NPCM_ADC_ENABLE | NPCM_ADCCON_ADC_CONV,
> +				  info->regs + NPCM_ADCCON);
> +			dev_err(info->dev, "RESET ADC Complete\n");
> +		}
> +		return -ETIMEDOUT;
> +	}
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
> +
> +	return 0;
> +}
> +
> +static int npcm_adc_read_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan, int *val,
> +			     int *val2, long mask)
> +{
> +	int ret;
> +	int vref_uv;
> +	struct npcm_adc *info = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		mutex_lock(&indio_dev->mlock);
> +		ret = npcm_adc_read(info, val, chan->channel);
> +		mutex_unlock(&indio_dev->mlock);
> +		if (ret) {
> +			dev_err(info->dev, "NPCM ADC read failed\n");
> +			return ret;
> +		}
> +		return IIO_VAL_INT;
> +	case IIO_CHAN_INFO_SCALE:
> +		if (info->vref) {
> +			vref_uv = regulator_get_voltage(info->vref);
> +			*val = vref_uv / 1000;
> +		} else {
> +			*val = NPCM_INT_VREF_MV;
> +		}
> +		*val2 = NPCM_RESOLUTION_BITS;
> +		return IIO_VAL_FRACTIONAL_LOG2;
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		*val = info->adc_sample_hz;
> +		return IIO_VAL_INT;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct iio_info npcm_adc_iio_info = {
> +	.read_raw = &npcm_adc_read_raw,
> +};
> +
> +static const struct of_device_id npcm_adc_match[] = {
> +	{ .compatible = "nuvoton,npcm750-adc", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, npcm_adc_match);
> +
> +static int npcm_adc_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	int irq;
> +	u32 div;
> +	u32 reg_con;
> +	struct resource *res;
> +	struct npcm_adc *info;
> +	struct iio_dev *indio_dev;
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = pdev->dev.of_node;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +	info = iio_priv(indio_dev);
> +
> +	info->dev = &pdev->dev;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	info->regs = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(info->regs))
> +		return PTR_ERR(info->regs);
> +
> +	info->adc_clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(info->adc_clk)) {
> +		dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
> +		return PTR_ERR(info->adc_clk);
> +	}
> +
> +	/* calculate ADC clock sample rate */
> +	reg_con = ioread32(info->regs + NPCM_ADCCON);
> +	div = reg_con & NPCM_ADCCON_DIV_MASK;
> +	div = div >> NPCM_ADCCON_DIV_SHIFT;
> +	info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) * 2);
> +
> +	if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
> +		info->rst_regmap = syscon_regmap_lookup_by_compatible
> +			("nuvoton,npcm750-rst");
> +		if (IS_ERR(info->rst_regmap)) {
> +			dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-rst\n");
> +			ret = PTR_ERR(info->rst_regmap);
> +			goto err_disable_clk;
> +		}
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq <= 0) {
> +		dev_err(dev, "failed getting interrupt resource\n");
> +		ret = -EINVAL;
> +		goto err_disable_clk;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev, irq, npcm_adc_isr, 0,
> +			       "NPCM_ADC", indio_dev);
> +	if (ret < 0) {
> +		dev_err(dev, "failed requesting interrupt\n");
> +		goto err_disable_clk;
> +	}
> +
> +	reg_con = ioread32(info->regs + NPCM_ADCCON);
> +	info->vref = devm_regulator_get_optional(&pdev->dev, "vref");
> +	if (!IS_ERR(info->vref)) {
> +		ret = regulator_enable(info->vref);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Can't enable ADC reference voltage\n");
> +			goto err_disable_clk;
> +		}
> +
> +		iowrite32(reg_con & ~NPCM_ADCCON_REFSEL,
> +			  info->regs + NPCM_ADCCON);
> +	} else {
> +		/*
> +		 * Any error which is not ENODEV indicates the regulator
> +		 * has been specified and so is a failure case.
> +		 */
> +		if (PTR_ERR(info->vref) != -ENODEV) {
> +			ret = PTR_ERR(info->vref);
> +			goto err_disable_clk;
> +		}
> +
> +		/* Use internal reference */
> +		iowrite32(reg_con | NPCM_ADCCON_REFSEL,
> +			  info->regs + NPCM_ADCCON);
> +	}
> +
> +	init_waitqueue_head(&info->wq);
> +
> +	reg_con = ioread32(info->regs + NPCM_ADCCON);
> +	reg_con |= NPCM_ADC_ENABLE;
> +
> +	/* Enable the ADC Module */
> +	iowrite32(reg_con, info->regs + NPCM_ADCCON);
> +
> +	/* Start ADC conversion */
> +	iowrite32(reg_con | NPCM_ADCCON_ADC_CONV, info->regs + NPCM_ADCCON);
> +
> +	platform_set_drvdata(pdev, indio_dev);
> +	indio_dev->name = dev_name(&pdev->dev);
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->info = &npcm_adc_iio_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->channels = npcm_adc_iio_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(npcm_adc_iio_channels);
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Couldn't register the device.\n");
> +		goto err_iio_register;
> +	}
> +
> +	pr_info("NPCM ADC driver probed\n");
Hmm. Not sure this tells us anything useful.  If we have succeeding
in probing there are lots of ways to find out that are better than
filling up the kernel log.

> +
> +	return 0;
> +
> +err_iio_register:
> +	iowrite32(reg_con & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
> +	if (!IS_ERR(info->vref))
> +		regulator_disable(info->vref);
> +err_disable_clk:
> +	clk_disable_unprepare(info->adc_clk);
> +
> +	return ret;
> +}
> +
> +static int npcm_adc_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +	struct npcm_adc *info = iio_priv(indio_dev);
> +	u32 regtemp;
> +
> +	regtemp = ioread32(info->regs + NPCM_ADCCON);

The ordering is a bit odd here.  I would have done the unregister
first then read the value.  Doesn't have any real effect other than making
reviewers wonder if there is something interesting going on!

> +
> +	iio_device_unregister(indio_dev);
> +	iowrite32(regtemp & ~NPCM_ADCCON_ADC_EN, info->regs + NPCM_ADCCON);
> +	if (!IS_ERR(info->vref))
> +		regulator_disable(info->vref);
> +	clk_disable_unprepare(info->adc_clk);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver npcm_adc_driver = {
> +	.probe		= npcm_adc_probe,
> +	.remove		= npcm_adc_remove,
> +	.driver		= {
> +		.name	= "npcm_adc",
> +		.of_match_table = npcm_adc_match,
> +	},
> +};
> +
> +module_platform_driver(npcm_adc_driver);
> +
> +MODULE_DESCRIPTION("Nuvoton NPCM ADC Driver");
> +MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
> +MODULE_LICENSE("GPL v2");