Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Corentin Labbe <clabbe@baylibre.com>
To:     mark.rutland@arm.com, maxime.ripard@bootlin.com,
        robh+dt@kernel.org, wens@csie.org
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
        Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v2] arm: sun8i-h3-nanopi-m1-plus: enable HDMI
Date:   Tue, 22 Jan 2019 07:46:46 +0000
Message-Id: <1548143206-11404-1-git-send-email-clabbe@baylibre.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patch enable HDMI output on sun8i-h3-nanopi-m1-plus.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
Change since v1:
- removed status=okay from hdmi_out
 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
index 65cba1050802..4ec94d72f021 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts
@@ -67,6 +67,21 @@
 		pinctrl-names = "default";
 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 	};
+
+	connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci1 {
@@ -94,6 +109,16 @@
 	};
 };
 
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
-- 
2.19.2