Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Thu, 24 Jan 2019 16:12:59 -0800
From:   Matthias Kaehlcke <mka@chromium.org>
To:     Balakrishna Godavarthi <bgodavar@codeaurora.org>
Cc:     marcel@holtmann.org, johan.hedberg@gmail.com, johan@kernel.org,
        linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
        hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v9 2/3] Bluetooth: hci_qca: Deassert RTS while baudrate
 change command
Message-ID: <20190125001259.GB81583@google.com>
References: <20190124120808.8275-1-bgodavar@codeaurora.org>
 <20190124120808.8275-3-bgodavar@codeaurora.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20190124120808.8275-3-bgodavar@codeaurora.org>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Balakrishna,

On Thu, Jan 24, 2019 at 05:38:07PM +0530, Balakrishna Godavarthi wrote:
> This patch will help to stop frame reassembly errors while changing
> the baudrate. This is because host send a change baudrate request
> command to the chip with 115200 bps, Whereas chip will change their
> UART clocks to the enable for new baudrate and sends the response
> for the change request command with newer baudrate, On host side
> we are still operating in 115200 bps which results of reading garbage
> data. Here we are pulling RTS line, so that chip we will wait to send data
> to host until host change its baudrate.
> 
> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> Changes in v9:
>  * disabled flow control while setting the baudrate of HOST and chip.
> ---
>  drivers/bluetooth/hci_qca.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index c08f4d105e73..6b5bcd44e24c 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -964,7 +964,6 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
>  	struct hci_uart *hu = hci_get_drvdata(hdev);
>  	struct qca_data *qca = hu->priv;
>  	struct sk_buff *skb;
> -	struct qca_serdev *qcadev;
>  	u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
>  
>  	if (baudrate > QCA_BAUDRATE_3200000)
> @@ -978,13 +977,6 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
>  		return -ENOMEM;
>  	}
>  
> -	/* Disabling hardware flow control is mandatory while
> -	 * sending change baudrate request to wcn3990 SoC.
> -	 */
> -	qcadev = serdev_device_get_drvdata(hu->serdev);
> -	if (qcadev->btsoc_type == QCA_WCN3990)
> -		hci_uart_set_flow_control(hu, true);
> -
>  	/* Assign commands to change baudrate and packet type. */
>  	skb_put_data(skb, cmd, sizeof(cmd));
>  	hci_skb_pkt_type(skb) = HCI_COMMAND_PKT;
> @@ -1000,9 +992,6 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
>  	schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
>  	set_current_state(TASK_RUNNING);
>  
> -	if (qcadev->btsoc_type == QCA_WCN3990)
> -		hci_uart_set_flow_control(hu, false);
> -
>  	return 0;
>  }
>  
> @@ -1089,6 +1078,7 @@ static int qca_check_speeds(struct hci_uart *hu)
>  static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
>  {
>  	unsigned int speed, qca_baudrate;
> +	struct qca_serdev *qcadev;
>  	int ret;
>  
>  	if (speed_type == QCA_INIT_SPEED) {
> @@ -1100,6 +1090,15 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
>  		if (!speed)
>  			return 0;
>  
> +		/* Deassert RTS while changing the baudrate of chip and host.
> +		 * This will prevent chip from transmitting its response with
> +		 * the new baudrate while the host port is still operating at
> +		 * the old speed.
> +		 */

It is not necessarily evident which action deasserts RTS, I suggest to
rephrase it to something like:

"Disable flow control for wcn3990 to deassert RTS while ... "

> +		qcadev = serdev_device_get_drvdata(hu->serdev);
> +		if (qcadev->btsoc_type == QCA_WCN3990)
> +			hci_uart_set_flow_control(hu, true);
> +
>  		qca_baudrate = qca_get_baudrate_value(speed);
>  		bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
>  		ret = qca_set_baudrate(hu->hdev, qca_baudrate);

flow control should be re-enabled in the error path.

Cheers

Matthias