Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Ioan-Adrian Ratiu <adi@adirat.com>
To:     Stefan Wahren <stefan.wahren@i2se.com>
Cc:     devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        stable@vger.kernel.org
Subject: [RFC][PATCH] Revert "ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs"
Date:   Sun, 27 Jan 2019 22:28:13 +0200
Message-Id: <20190127202813.29493-1-adi@adirat.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This reverts commit bea8a160c621d19f7f78b13e14e03f4b8e44cd4b.

Contrary to what the commit message says, on my rpi 3 b v1.2 changing
the polarity causes the exact behaviour this commit intends to fix, as
described at the referenced link below (wlan0 disapears).

With reset-gpios = ... GPIO_ACTIVE_HIGH, brcmfmac errors in dmesg:

[    7.977512] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
[    7.977623] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[    7.978007] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[    7.978377] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[    7.978724] brcmfmac: brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
[    7.978734] brcmfmac: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[    7.978747] brcmfmac: brcmf_cfg80211_get_channel: chanspec failed (-110)
[    7.982817] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
[    7.982880] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[    7.983255] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame

The only solution I currently have is to revert and everything works
as expected and as before changing the polarity.

Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com>
---
 arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
 arch/arm/boot/dts/bcm2837-rpi-3-b.dts      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 93762244be7f..4adb85e66be3 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -31,7 +31,7 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 89e6fd547c75..c318bcbc6ba7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -26,7 +26,7 @@
 
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-- 
2.20.1