Date: Thu, 4 Mar 2004 09:45:55 +0000
From: Russell King <rmk+lkml@arm.linux.org.uk>
To: Rob Landley <rob@landley.net>, hermes@gibson.dropbear.id.au
Cc: Linux kernel <linux-kernel@vger.kernel.org>
Subject: Re: Orinoco card fails on resume with 2.6.2 (race condition?)
Message-ID: <20040304094555.C6052@flint.arm.linux.org.uk>
Mail-Followup-To: Rob Landley <rob@landley.net>,
	hermes@gibson.dropbear.id.au,
	Linux kernel <linux-kernel@vger.kernel.org>
References: <200402251436.15740.rob@landley.net>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5.1i
In-Reply-To: <200402251436.15740.rob@landley.net>; from rob@landley.net on Wed, Feb 25, 2004 at 02:36:15PM -0600
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 50401
Lines: 1757

On Wed, Feb 25, 2004 at 02:36:15PM -0600, Rob Landley wrote:
> Attached are a dmesg log from my laptop resuming after a software suspend
> with a stock 2.6.2 kernel, and the config that 2.6.2 kernel was compiled
> with.

I guess we need the orinoco people to comment on this; although I seem
to look after the 2.6 PCMCIA _core_, I certainly do not look after
PCMCIA driver issues.

David - can you provide any insight?

> Usually after resume the network is back and happy, but this time it went 
> "boing".  Specifically:
> 
> [root@driftwood root]# ifconfig eth0 up
> SIOCSIFFLAGS: Device or resource busy
> [root@driftwood root]#
> 
> The relevant section of the dmesg output seems to be:
> 
> hda: Wakeup request inited, waiting for !BSY...
> hda: start_power_step(step: 1000)
> blk: queue cb535000, I/O limit 4095Mb (mask 0xffffffff)
> hda: completing PM request, resume
> hdc: Wakeup request inited, waiting for !BSY...
> hdc: start_power_step(step: 1000)
> hdc: completing PM request, resume
> eth0: New link status: Connected (0001)
> Restarting tasks... done
> request_module: failed /sbin/modprobe -- char-major-10-135. error = 256
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> hermes @ IO 0x100: Timeout waiting for command completion.
> eth0: Error -110 disabling MAC port
> hermes @ IO 0x100: Timeout waiting for command completion.
> eth0: Error -110 enabling MAC port
> 
> Any clues?
> 
> Rob
> 
> P.S.  No, I can't pop the card and put it back in, it's built into the 
> machine.  This laptop has two cardbus busses, one for external cards and one 
> for the built in wireless, and cardctl gets a touch confused at times when 
> there are two cardbus busses in one machine.  I just sent a "cardctl reset 
> 0", which seems to have gotten the driver to talk to the card again, but 
> dhclient isn't getting any response from the hub...  Power cycle time.
> 
> Oh well, I've been meaning to upgrade to 2.6.3 anyway... :)

> th0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> Stopping tasks: ================================================================================================================|
> Freeing memory: .<6>eth0: New link status: AP Out of Range (0004)
> ........................<6>eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> ......................|
> hdc: start_power_step(step: 0)
> hdc: completing PM request, suspend
> hda: start_power_step(step: 0)
> hda: start_power_step(step: 1)
> hda: complete_power_step(step: 1, stat: 50, err: 0)
> hda: completing PM request, suspend
> PM: Attempting to suspend to disk.
> PM: snapshotting memory.
> PM: Image restored successfully.
> hda: Wakeup request inited, waiting for !BSY...
> hda: start_power_step(step: 1000)
> blk: queue cb535000, I/O limit 4095Mb (mask 0xffffffff)
> hda: completing PM request, resume
> hdc: Wakeup request inited, waiting for !BSY...
> hdc: start_power_step(step: 1000)
> hdc: completing PM request, resume
> Restarting tasks... done
> request_module: failed /sbin/modprobe -- char-major-10-135. error = 256
> request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
> Stopping tasks: ================================================================================================================|
> Freeing memory: .........................<6>eth0: New link status: Connected (0001)
> eth0: New link status: AP Out of Range (0004)
> .<6>eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> eth0: New link status: AP Out of Range (0004)
> eth0: New link status: AP In Range (0005)
> ..<6>eth0: New link status: AP Out of Range (0004)
> ........<6>eth0: New link status: AP In Range (0005)
> .<6>eth0: New link status: AP Out of Range (0004)
> ..............|
> hdc: start_power_step(step: 0)
> hdc: completing PM request, suspend
> hda: start_power_step(step: 0)
> hda: start_power_step(step: 1)
> hda: complete_power_step(step: 1, stat: 50, err: 0)
> hda: completing PM request, suspend
> PM: Attempting to suspend to disk.
> PM: snapshotting memory.
> PM: Image restored successfully.
> hda: Wakeup request inited, waiting for !BSY...
> hda: start_power_step(step: 1000)
> blk: queue cb535000, I/O limit 4095Mb (mask 0xffffffff)
> hda: completing PM request, resume
> hdc: Wakeup request inited, waiting for !BSY...
> hdc: start_power_step(step: 1000)
> hdc: completing PM request, resume
> Restarting tasks... done
> request_module: failed /sbin/modprobe -- char-major-10-135. error = 256
> request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
> Stopping tasks: ====================================================================================================================|
> Freeing memory: ...................................................|
> hdc: start_power_step(step: 0)
> hdc: completing PM request, suspend
> hda: start_power_step(step: 0)
> hda: start_power_step(step: 1)
> hda: complete_power_step(step: 1, stat: 50, err: 0)
> hda: completing PM request, suspend
> PM: Attempting to suspend to disk.
> PM: snapshotting memory.
> PM: Image restored successfully.
> hda: Wakeup request inited, waiting for !BSY...
> hda: start_power_step(step: 1000)
> blk: queue cb535000, I/O limit 4095Mb (mask 0xffffffff)
> hda: completing PM request, resume
> hdc: Wakeup request inited, waiting for !BSY...
> hdc: start_power_step(step: 1000)
> hdc: completing PM request, resume
> Restarting tasks... done
> eth0: New link status: Connected (0001)
> request_module: failed /sbin/modprobe -- char-major-10-135. error = 256
> request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> Stopping tasks: ==================================================================================================================|
> Freeing memory: .................................................|
> hdc: start_power_step(step: 0)
> hdc: completing PM request, suspend
> hda: start_power_step(step: 0)
> hda: start_power_step(step: 1)
> hda: complete_power_step(step: 1, stat: 50, err: 0)
> hda: completing PM request, suspend
> PM: Attempting to suspend to disk.
> PM: snapshotting memory.
> PM: Image restored successfully.
> hda: Wakeup request inited, waiting for !BSY...
> hda: start_power_step(step: 1000)
> blk: queue cb535000, I/O limit 4095Mb (mask 0xffffffff)
> hda: completing PM request, resume
> hdc: Wakeup request inited, waiting for !BSY...
> hdc: start_power_step(step: 1000)
> hdc: completing PM request, resume
> Restarting tasks... done
> request_module: failed /sbin/modprobe -- char-major-10-134. error = 256
> request_module: failed /sbin/modprobe -- char-major-10-135. error = 256
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> eth0: New link status: Disconnected (0002)
> eth0: New link status: Connected (0001)
> eth0: New link status: AP Changed (0003)
> eth0: New link status: Connected (0001)
> eth0: New link status: AP Changed (0003)
> eth0: New link status: Disconnected (0002)
> eth0: New link status: Connected (0001)
> eth0: New link status: AP Changed (0003)
> eth0: New link status: Disconnected (0002)
> eth0: New link status: Connected (0001)
> eth0: New link status: AP Changed (0003)
> eth0: New link status: Disconnected (0002)
> eth0: New link status: Connected (0001)
> Stopping tasks: =============================================================================================================================|
> Freeing memory: ..............................................|
> hdc: start_power_step(step: 0)
> hdc: completing PM request, suspend
> hda: start_power_step(step: 0)
> hda: start_power_step(step: 1)
> hda: complete_power_step(step: 1, stat: 50, err: 0)
> hda: completing PM request, suspend
> PM: Attempting to suspend to disk.
> PM: snapshotting memory.
> PM: Image restored successfully.
> hda: Wakeup request inited, waiting for !BSY...
> hda: start_power_step(step: 1000)
> blk: queue cb535000, I/O limit 4095Mb (mask 0xffffffff)
> hda: completing PM request, resume
> hdc: Wakeup request inited, waiting for !BSY...
> hdc: start_power_step(step: 1000)
> hdc: completing PM request, resume
> eth0: New link status: Connected (0001)
> Restarting tasks... done
> request_module: failed /sbin/modprobe -- char-major-10-135. error = 256
> eth0: New link status: Connected (0001)
> eth0: New link status: Connected (0001)
> hermes @ IO 0x100: Timeout waiting for command completion.
> eth0: Error -110 disabling MAC port
> hermes @ IO 0x100: Timeout waiting for command completion.
> eth0: Error -110 enabling MAC port
> hermes @ IO 0x100: Timeout waiting for command completion.
> eth0: Error -110 setting MAC address
> eth0: Error -110 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> hermes @ IO 0x100: Error -16 issuing command.
> eth0: Error -16 setting MAC address
> eth0: Error -16 configuring card

> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_STANDALONE=y
> CONFIG_BROKEN_ON_SMP=y
> 
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=14
> # CONFIG_IKCONFIG is not set
> CONFIG_EMBEDDED=y
> CONFIG_KALLSYMS=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> 
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_OBSOLETE_MODPARM=y
> # CONFIG_MODVERSIONS is not set
> CONFIG_KMOD=y
> 
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> CONFIG_MPENTIUMIII=y
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=5
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> # CONFIG_HPET_TIMER is not set
> # CONFIG_HPET_EMULATE_RTC is not set
> # CONFIG_SMP is not set
> # CONFIG_PREEMPT is not set
> # CONFIG_X86_UP_APIC is not set
> CONFIG_X86_TSC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_EFI is not set
> 
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> # CONFIG_SOFTWARE_SUSPEND is not set
> CONFIG_PM_DISK=y
> CONFIG_PM_DISK_PARTITION="/dev/hda2"
> 
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_INTERPRETER=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_SLEEP_PROC_FS=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_TOSHIBA is not set
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> # CONFIG_ACPI_RELAXED_AML is not set
> 
> #
> # APM (Advanced Power Management) BIOS Support
> #
> # CONFIG_APM is not set
> 
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> # CONFIG_CPU_FREQ_PROC_INTF is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
> # CONFIG_CPU_FREQ_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_TABLE=y
> 
> #
> # CPUFreq processor drivers
> #
> # CONFIG_X86_ACPI_CPUFREQ is not set
> # CONFIG_X86_POWERNOW_K6 is not set
> # CONFIG_X86_POWERNOW_K7 is not set
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> # CONFIG_X86_SPEEDSTEP_ICH is not set
> # CONFIG_X86_SPEEDSTEP_SMI is not set
> # CONFIG_X86_P4_CLOCKMOD is not set
> # CONFIG_X86_LONGRUN is not set
> # CONFIG_X86_LONGHAUL is not set
> 
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_LEGACY_PROC=y
> CONFIG_PCI_NAMES=y
> CONFIG_ISA=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> CONFIG_HOTPLUG=y
> 
> #
> # PCMCIA/CardBus support
> #
> CONFIG_PCMCIA=m
> CONFIG_YENTA=m
> CONFIG_CARDBUS=y
> # CONFIG_I82092 is not set
> # CONFIG_I82365 is not set
> # CONFIG_TCIC is not set
> CONFIG_PCMCIA_PROBE=y
> 
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
> 
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_MISC=y
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> # CONFIG_FW_LOADER is not set
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_PC_CML1=y
> # CONFIG_PARPORT_SERIAL is not set
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_PC_PCMCIA is not set
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_PARPORT_1284 is not set
> 
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
> 
> #
> # Protocols
> #
> # CONFIG_ISAPNP is not set
> # CONFIG_PNPBIOS is not set
> 
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> CONFIG_BLK_DEV_RAM=m
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_LBD=y
> 
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> 
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> # CONFIG_BLK_DEV_IDECS is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_TASKFILE_IO=y
> 
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> CONFIG_BLK_DEV_RZ1000=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> CONFIG_BLK_DEV_ALI15X3=y
> # CONFIG_WDC_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_CHIPSETS is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_DMA_NONPCI is not set
> # CONFIG_BLK_DEV_HD is not set
> 
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> CONFIG_CHR_DEV_SG=y
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> CONFIG_SCSI_REPORT_LUNS=y
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_SATA is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX_CONFIG=y
> # CONFIG_SCSI_QLA21XX is not set
> # CONFIG_SCSI_QLA22XX is not set
> # CONFIG_SCSI_QLA23XX is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # PCMCIA SCSI adapter support
> #
> # CONFIG_PCMCIA_AHA152X is not set
> # CONFIG_PCMCIA_FDOMAIN is not set
> # CONFIG_PCMCIA_NINJA_SCSI is not set
> # CONFIG_PCMCIA_QLOGIC is not set
> 
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> 
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> 
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> CONFIG_IEEE1394=y
> 
> #
> # Subsystem Options
> #
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> # CONFIG_IEEE1394_OUI_DB is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Texas Instruments PCILynx requires I2C
> #
> CONFIG_IEEE1394_OHCI1394=y
> 
> #
> # Protocol Drivers
> #
> # CONFIG_IEEE1394_VIDEO1394 is not set
> # CONFIG_IEEE1394_SBP2 is not set
> # CONFIG_IEEE1394_ETH1394 is not set
> # CONFIG_IEEE1394_DV1394 is not set
> # CONFIG_IEEE1394_RAWIO is not set
> # CONFIG_IEEE1394_CMP is not set
> 
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> 
> #
> # Networking support
> #
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> # CONFIG_NETLINK_DEV is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_IPV6 is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_NETFILTER is not set
> 
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=y
> # CONFIG_IP_SCTP is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> CONFIG_NETDEVICES=y
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_NET_SB1000 is not set
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> 
> #
> # Tulip family network device support
> #
> # CONFIG_NET_TULIP is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_AC3200 is not set
> # CONFIG_APRICOT is not set
> # CONFIG_B44 is not set
> # CONFIG_FORCEDETH is not set
> # CONFIG_CS89x0 is not set
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_E100 is not set
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> CONFIG_8139TOO=y
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> # CONFIG_8139_OLD_RX_RESET is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_NET_POCKET is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> 
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> CONFIG_NET_RADIO=y
> 
> #
> # Obsolete Wireless cards support (pre-802.11)
> #
> # CONFIG_STRIP is not set
> # CONFIG_ARLAN is not set
> # CONFIG_WAVELAN is not set
> # CONFIG_PCMCIA_WAVELAN is not set
> # CONFIG_PCMCIA_NETWAVE is not set
> 
> #
> # Wireless 802.11 Frequency Hopping cards support
> #
> # CONFIG_PCMCIA_RAYCS is not set
> 
> #
> # Wireless 802.11b ISA/PCI cards support
> #
> # CONFIG_AIRO is not set
> CONFIG_HERMES=m
> # CONFIG_PLX_HERMES is not set
> # CONFIG_TMD_HERMES is not set
> # CONFIG_PCI_HERMES is not set
> 
> #
> # Wireless 802.11b Pcmcia/Cardbus cards support
> #
> CONFIG_PCMCIA_HERMES=m
> CONFIG_AIRO_CS=m
> # CONFIG_PCMCIA_ATMEL is not set
> # CONFIG_PCMCIA_WL3501 is not set
> CONFIG_NET_WIRELESS=y
> 
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> 
> #
> # PCMCIA network device support
> #
> CONFIG_NET_PCMCIA=y
> CONFIG_PCMCIA_3C589=m
> CONFIG_PCMCIA_3C574=m
> CONFIG_PCMCIA_FMVJ18X=m
> CONFIG_PCMCIA_PCNET=m
> CONFIG_PCMCIA_NMCLAN=m
> CONFIG_PCMCIA_SMC91C92=m
> CONFIG_PCMCIA_XIRC2PS=m
> CONFIG_PCMCIA_AXNET=m
> 
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
> 
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
> 
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
> 
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN_BOOL is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_INPORT is not set
> # CONFIG_MOUSE_LOGIBM is not set
> # CONFIG_MOUSE_PC110PAD is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=m
> # CONFIG_INPUT_UINPUT is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> # CONFIG_SERIAL_8250_CONSOLE is not set
> # CONFIG_SERIAL_8250_CS is not set
> # CONFIG_SERIAL_8250_ACPI is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
> 
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> CONFIG_PRINTER=y
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> # CONFIG_TIPAR is not set
> 
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
> 
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_HW_RANDOM is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_NVIDIA is not set
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> # CONFIG_AGP_VIA is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_GAMMA is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> CONFIG_DRM_I830=y
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> 
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> # CONFIG_MWAVE is not set
> # CONFIG_RAW_DRIVER is not set
> # CONFIG_HANGCHECK_TIMER is not set
> 
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> 
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> 
> #
> # Graphics support
> #
> # CONFIG_FB is not set
> # CONFIG_VIDEO_SELECT is not set
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> 
> #
> # Sound
> #
> CONFIG_SOUND=y
> 
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=y
> CONFIG_SND_SEQUENCER=y
> # CONFIG_SND_SEQ_DUMMY is not set
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=y
> CONFIG_SND_PCM_OSS=y
> CONFIG_SND_SEQUENCER_OSS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> 
> #
> # Generic devices
> #
> # CONFIG_SND_DUMMY is not set
> # CONFIG_SND_VIRMIDI is not set
> # CONFIG_SND_MTPAV is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> # CONFIG_SND_MPU401 is not set
> 
> #
> # ISA devices
> #
> # CONFIG_SND_AD1848 is not set
> # CONFIG_SND_CS4231 is not set
> # CONFIG_SND_CS4232 is not set
> # CONFIG_SND_CS4236 is not set
> # CONFIG_SND_ES1688 is not set
> # CONFIG_SND_ES18XX is not set
> # CONFIG_SND_GUSCLASSIC is not set
> # CONFIG_SND_GUSEXTREME is not set
> # CONFIG_SND_GUSMAX is not set
> # CONFIG_SND_INTERWAVE is not set
> # CONFIG_SND_INTERWAVE_STB is not set
> # CONFIG_SND_OPTI92X_AD1848 is not set
> # CONFIG_SND_OPTI92X_CS4231 is not set
> # CONFIG_SND_OPTI93X is not set
> # CONFIG_SND_SB8 is not set
> # CONFIG_SND_SB16 is not set
> # CONFIG_SND_SBAWE is not set
> # CONFIG_SND_WAVEFRONT is not set
> # CONFIG_SND_CMI8330 is not set
> # CONFIG_SND_OPL3SA2 is not set
> # CONFIG_SND_SGALAXY is not set
> # CONFIG_SND_SSCAPE is not set
> 
> #
> # PCI devices
> #
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> # CONFIG_SND_YMFPCI is not set
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> CONFIG_SND_INTEL8X0=y
> # CONFIG_SND_SONICVIBES is not set
> # CONFIG_SND_VIA82XX is not set
> # CONFIG_SND_VX222 is not set
> 
> #
> # ALSA USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
> 
> #
> # PCMCIA devices
> #
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_VXP440 is not set
> 
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
> 
> #
> # USB support
> #
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
> 
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> 
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_OHCI_HCD=m
> CONFIG_USB_UHCI_HCD=m
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_AUDIO is not set
> # CONFIG_USB_BLUETOOTH_TTY is not set
> # CONFIG_USB_MIDI is not set
> # CONFIG_USB_ACM is not set
> CONFIG_USB_PRINTER=m
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_HP8200e is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> 
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=m
> CONFIG_USB_HIDINPUT=y
> # CONFIG_HID_FF is not set
> # CONFIG_USB_HIDDEV is not set
> 
> #
> # USB HID Boot Protocol drivers
> #
> # CONFIG_USB_KBD is not set
> # CONFIG_USB_MOUSE is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_XPAD is not set
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> CONFIG_USB_SCANNER=m
> # CONFIG_USB_MICROTEK is not set
> # CONFIG_USB_HPUSBSCSI is not set
> 
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
> 
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
> 
> #
> # USB Network adaptors
> #
> CONFIG_USB_CATC=m
> CONFIG_USB_KAWETH=m
> CONFIG_USB_PEGASUS=m
> CONFIG_USB_RTL8150=m
> CONFIG_USB_USBNET=m
> 
> #
> # USB Host-to-Host Cables
> #
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_GENESYS=y
> CONFIG_USB_NET1080=y
> CONFIG_USB_PL2301=y
> 
> #
> # Intelligent USB Devices/Gadgets
> #
> # CONFIG_USB_ARMLINUX is not set
> # CONFIG_USB_EPSON2888 is not set
> # CONFIG_USB_ZAURUS is not set
> # CONFIG_USB_CDCETHER is not set
> 
> #
> # USB Network Adapters
> #
> CONFIG_USB_AX8817X=y
> 
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> 
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_TIGL is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_BRLVGER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_TEST is not set
> 
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> # CONFIG_EXT3_FS_POSIX_ACL is not set
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=y
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> CONFIG_UDF_FS=y
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> 
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> 
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V3 is not set
> # CONFIG_NFS_V4 is not set
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=y
> # CONFIG_NFSD_V3 is not set
> # CONFIG_NFSD_TCP is not set
> CONFIG_LOCKD=y
> CONFIG_EXPORTFS=y
> CONFIG_SUNRPC=y
> # CONFIG_SUNRPC_GSS is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> # CONFIG_AFS_FS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
> 
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
> 
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
> CONFIG_DEBUG_SPINLOCK_SLEEP=y
> CONFIG_FRAME_POINTER=y
> 
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
> 
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
> 
> #
> # Library routines
> #
> CONFIG_CRC32=y
> CONFIG_X86_BIOS_REBOOT=y

> 00:00.0 Host bridge: ALi Corporation M1621 (rev 01)
> 	Flags: bus master, slow devsel, latency 0
> 	Memory at e0000000 (32-bit, prefetchable) [size=64M]
> 	Capabilities: [b0] AGP version 1.0
> 	Capabilities: [a4] Power Management version 1
> 
> 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller (rev 01) (prog-if 00 [Normal decode])
> 	Flags: bus master, fast devsel, latency 0
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> 	Memory behind bridge: 80500000-818fffff
> 
> 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01)
> 	Subsystem: IBM: Unknown device 020f
> 	Flags: medium devsel, IRQ 11
> 	I/O ports at 9000 [size=256]
> 	Memory at 81a00000 (32-bit, non-prefetchable) [size=4K]
> 	Capabilities: [dc] Power Management version 2
> 
> 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
> 	Flags: bus master, medium devsel, latency 0
> 	Capabilities: [a0] Power Management version 1
> 
> 00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
> 	Subsystem: Lucent Technologies: Unknown device ab01
> 	Flags: bus master, medium devsel, latency 168, IRQ 6
> 	Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
> 	Memory window 0: 10400000-107ff000 (prefetchable)
> 	Memory window 1: 10800000-10bff000
> 	I/O window 0: 00004000-000040ff
> 	I/O window 1: 00004400-000044ff
> 	16-bit legacy interface ports at 0001
> 
> 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if fa)
> 	Flags: bus master, medium devsel, latency 32, IRQ 15
> 	I/O ports at 7050 [size=16]
> 	Capabilities: [60] Power Management version 2
> 
> 00:11.0 Bridge: ALi Corporation M7101 PMU
> 	Flags: medium devsel
> 
> 00:13.0 CardBus bridge: O2 Micro, Inc. OZ6812 Cardbus Controller (rev 05)
> 	Subsystem: IBM: Unknown device 01a3
> 	Flags: bus master, stepping, slow devsel, latency 168, IRQ 10
> 	Memory at 10001000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
> 	Memory window 0: 10c00000-10fff000 (prefetchable)
> 	Memory window 1: 11000000-113ff000
> 	I/O window 0: 00004800-000048ff
> 	I/O window 1: 00004c00-00004cff
> 	16-bit legacy interface ports at 0001
> 
> 00:14.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
> 	Flags: bus master, medium devsel, latency 32, IRQ 10
> 	Memory at 81c00000 (32-bit, non-prefetchable) [size=4K]
> 	Capabilities: [60] Power Management version 2
> 
> 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 5d) (prog-if 00 [VGA])
> 	Subsystem: IBM: Unknown device 0213
> 	Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
> 	Memory at 80800000 (32-bit, non-prefetchable) [size=8M]
> 	Memory at 80500000 (32-bit, non-prefetchable) [size=128K]
> 	Memory at 81000000 (32-bit, non-prefetchable) [size=8M]
> 	Expansion ROM at 80520000 [disabled] [size=64K]
> 	Capabilities: [80] AGP version 1.0
> 	Capabilities: [90] Power Management version 1
> 


-- 
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/