Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Wed, 30 Jan 2019 14:29:52 -0800
From:   alokc@codeaurora.org
To:     Georgi Djakov <georgi.djakov@linaro.org>
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
        linux-spi@vger.kernel.org, linux-serial@vger.kernel.org,
        Andy Gross <andy.gross@linaro.org>,
        David Brown <david.brown@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>, dianders@chromium.org,
        swboyd@chromium.org, bjorn.andersson@linaro.org
Subject: Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for
 GENI QUP
In-Reply-To: <c4260d66-5ca4-b194-0cbc-2a682a99db4b@linaro.org>
References: <1548138816-1149-1-git-send-email-alokc@codeaurora.org>
 <1548138816-1149-2-git-send-email-alokc@codeaurora.org>
 <c4260d66-5ca4-b194-0cbc-2a682a99db4b@linaro.org>
Message-ID: <77a4841746b00a67a14daa42886be57b@codeaurora.org>
User-Agent: Roundcube Webmail/1.2.5
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 2019-01-23 10:35, Georgi Djakov wrote:
> Hi Alok,
> 
> Thanks for the patches!
> 
> On 1/22/19 08:33, Alok Chauhan wrote:
>> Add documentation for the interconnect and interconnect-names bindings
> 
> s/interconnect /interconnects /
> 
>> for the GENI QUP as detailed by 
>> bindings/interconnect/interconnect.txt.
>> 
>> Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
>> ---
>>  Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 10 
>> ++++++++++
>>  1 file changed, 10 insertions(+)
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt 
>> b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
>> index dab7ca9..44d7e02 100644
>> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
>> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
>> @@ -17,6 +17,12 @@ Required properties if child node exists:
>>  - #address-cells: 	Must be <1> for Serial Engine Address
>>  - #size-cells: 		Must be <1> for Serial Engine Address Size
>>  - ranges: 		Must be present
>> +- interconnects:	phandle to a interconnect provider. Please refer
> 
> s/a interconnect/an interconnect/
sure, will do.
> 
>> +			../interconnect/interconnect.txt for details.
>> +			Must be 2 paths corresponding to 2 AXI ports.
>> +- interconnect-names:	Port names to differentiate between the
>> +			2 interconnect paths defined with interconnect
>> +			specifier.
>> 
>>  Properties for children:
>> 
>> @@ -67,6 +73,10 @@ Example:
>>  		#size-cells = <1>;
>>  		ranges;
>> 
>> +		interconnects = <&qnoc 11 &qnoc 512>,
>> +				<&qnoc 0 &qnoc 543>;
> 
> Please take a snippet from your patch 6/6 and put it here instead of 
> the
> hard-coded integers above.
sure
> 
>> +		interconnect-names = "qup-memory", "qup-config";
>> +
>>  		i2c0: i2c@a94000 {
>>  			compatible = "qcom,geni-i2c";
>>  			reg = <0xa94000 0x4000>;
>> 
> 
> When you post a new version, please change the subject of the patch
> series to PATCH v2, PATCH v3 etc, in order to be able to distinguish
> between different versions.
sure, will do this.
> 
> Thanks,
> Georgi

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
Forum,a Linux Foundation Collaborative Project