Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Jeremy Gebben <jgebben@sweptlaser.com>
To:     Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>,
        linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/3] hwmon: (lm85) add LM96000 high freqency pwm support
Date:   Thu, 31 Jan 2019 15:06:14 -0700
Message-Id: <20190131220617.15223-1-jgebben@sweptlaser.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

This patch adds support for the PWM frequencies from 22.5 to 30 kHz
available on the LM96000.

It looks like this chip has been supported for a long time, but wasn't
mentioned in the docs (which I have updated).

Also, it has been using the generic 'lm85' prefix, which I have not
changed to avoid breaking userspace or device tree files. AFAICT,
lm85_detect() will only return 'lm85' for LM96000 chips, so it doesn't
look like you can get a bare 'lm85' prefix with any other chips.

I stumbled on to a 10 year old thread discussing a patch which looks
like an early attempt to add support for this chip, which may be of
interest:
https://lm-sensors.lm-sensors.narkive.com/1SIwaMDT/patch-hwmon-lm96000-support

Thanks for reviewing,

Jeremy

Changes since v1:
 - replace freq_map_mask with freq_map_size

Jeremy Gebben (3):
  hwmon: (lm85) remove freq_map size hardcodes
  hwmon: (lm85) Document the LM96000 as supported
  hwmon: (lm85) add support for LM96000 high frequencies

 Documentation/hwmon/lm85 |  9 ++++++++-
 drivers/hwmon/lm85.c     | 32 ++++++++++++++++++++++----------
 2 files changed, 30 insertions(+), 11 deletions(-)

-- 
2.17.1