Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262506AbUCHPNT (ORCPT ); Mon, 8 Mar 2004 10:13:19 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262507AbUCHPNT (ORCPT ); Mon, 8 Mar 2004 10:13:19 -0500 Received: from ccs.covici.com ([209.249.181.196]:9179 "EHLO ccs.covici.com") by vger.kernel.org with ESMTP id S262506AbUCHPNQ (ORCPT ); Mon, 8 Mar 2004 10:13:16 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Message-ID: <16460.36222.191866.759421@ccs.covici.com> Date: Mon, 8 Mar 2004 10:13:02 -0500 From: John covici To: Bartlomiej Zolnierkiewicz Cc: John Covici , linux-kernel@vger.kernel.org Subject: Re: shuttle an50r Motherboard and Linux In-Reply-To: <200403080151.28816.bzolnier@elka.pw.edu.pl> References: <200403080151.28816.bzolnier@elka.pw.edu.pl> X-Mailer: VM 7.17 under Emacs 21.3.50.2 Reply-To: covici@ccs.covici.com Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2465 Lines: 60 OK, here are the relevant parts of the lspci -v -- I have been using 2.4.22, but if it will make a difference I will try newer ones. 00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: bus master, 66Mhz, fast devsel, latency 0 Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [44] #08 [0180] Capabilities: [c0] AGP version 3.0 00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: bus master, 66Mhz, fast devsel, latency 0 00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: 66Mhz, fast devsel, IRQ 5 I/O ports at 4c00 [size=64] I/O ports at 4c40 [size=64] Capabilities: [44] Power Management version 2 00:05.0 Ethernet controller: nVidia Corporation nForce3 Ethernet (rev a5) Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device a550 Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 5 Memory at e8000000 (32-bit, non-prefetchable) [size=4K] I/O ports at d000 [size=8] Capabilities: [44] Power Management version 2 on Monday 03/08/2004 Bartlomiej Zolnierkiewicz(B.Zolnierkiewicz@elka.pw.edu.pl) wrote > > Hi, > > On Monday 08 of March 2004 01:11, John Covici wrote: > > Hi. I have had a couple of problems trying to get this Motherboard > > to work correctly under Linux. > > > > The Ethernet 10/100 is supposed to be an RC82540m, but the e100 > > module does not recognize it. If you do an lspci it doesn't say > > Intel at all, but just Nvidia and Shuttle. Am I doing something > > wrong, or is there a better driver in 2.6 than 2.4 or what? > > > > Also, I am using the amd74xx driver for the chip set, but it does not > > seem to activate dma or announce udma and a number as the via one > > does -- is this the correct driver? > > What kernel version(s) are you using? > What are the boot messages ('dmesg' command output)? > What is the output of 'lspci' command? > > Regards, > Bartlomiej -- John Covici covici@ccs.covici.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/