Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262883AbUCJXlH (ORCPT ); Wed, 10 Mar 2004 18:41:07 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262765AbUCJXlH (ORCPT ); Wed, 10 Mar 2004 18:41:07 -0500 Received: from main.gmane.org ([80.91.224.249]:53996 "EHLO main.gmane.org") by vger.kernel.org with ESMTP id S262883AbUCJXkK (ORCPT ); Wed, 10 Mar 2004 18:40:10 -0500 X-Injected-Via-Gmane: http://gmane.org/ To: linux-kernel@vger.kernel.org From: Giuseppe Bilotta Subject: Framebuffer with nVidia GeForce 2 Go on Dell Inspiron 8200 Date: Wed, 10 Mar 2004 23:38:02 +0000 (UTC) Message-ID: X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: ppp-69-130.29-151.libero.it Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2327 Lines: 62 Date: Thu, 11 Mar 2004 00:37:58 +0100 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: 7bit X-Newsreader: MicroPlanet Gravity v2.60 Hello, I have recently started to migrate to Linux on my DELL laptop; everything is going pretty smoothly, but one thing I can't seem to enable is the framebuffer to take advantage, in console, of the high resolution my video card and monitor can afford. The video card is an nVidia GeForce 2 Go, on a Dell Inspiron 8200, and the monitor is their UXGA monitor (1600x1200). The system BIOS is version A11, which means the video card BIOS is up to version 3.11.01.44.D1. The system I'm running is a Debian testing/unstable updated every two or three days. I tried the following things with the kernels 2.4.22, 2.6.0, 2.6.1, 2.6.2, 2.6.3 (self-compiled) more or less always with the same results: 1. The vga framebuffer works. I can even bring the monitor to 800x600 in tweaked VGA mode. 2. The VESA framebuffer does not work. Apparently, the card is not detected as VESA-compatible. (I'm not 100% sure about this --how can I check if this is indeed the case?) 3. The Riva framebuffer doesn't work either. It detects the video card all right, understands that I'm running on a laptop and thus with an LCD monitor, but as soon as I "touch" it (be it even just with a fbset -i to find the information), the screen goes blank or has some very funny graphical effects (fade to black in the middle, etc). The system doesn't lock up (I can still blind-type and reset it), but I can't use it. Does anybody know what could be wrong? The only thing which I can think of is that even Windows drivers have problems with this particular setup; the only documentation I could find on the matter is here http://www.laptopvideo2go.com/ (Go to "Dell laptop owners") HTH, -- Giuseppe "Oblomov" Bilotta Can't you see It all makes perfect sense Expressed in dollar and cents Pounds shillings and pence (Roger Waters) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/