Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20190124195900.22620-1-jagan@amarulasolutions.com>
 <20190124195900.22620-12-jagan@amarulasolutions.com> <20190125212433.ni2jg3wvpyjazlxf@flea>
 <CAMty3ZAsH2iZ+JEqTE3D58aXfGuhMSg9YoO56ZhhOeE4c4yQHQ@mail.gmail.com>
 <20190129151348.mh27btttsqcmeban@flea> <CAMty3ZAjAoti8Zu80c=OyCA+u-jtQnkidsKSNz_c2OaRswqc3w@mail.gmail.com>
 <20190201143102.rcvrxstc365mezvx@flea> <CAMty3ZAgJMy+qOW0eO5U_MDUPw0Zaq7tLDi8zwUxw=B6UiFS9w@mail.gmail.com>
 <20190212093028.kulsqiai7dsnmbu2@flea>
In-Reply-To: <20190212093028.kulsqiai7dsnmbu2@flea>
From:   Jagan Teki <jagan@amarulasolutions.com>
Date:   Tue, 12 Feb 2019 15:08:49 +0530
Message-ID: <CAMty3ZCqBLyYqdYG+WPErYpM6yZEnwAtg_ocztqRahywVqVjaw@mail.gmail.com>
Subject: Re: [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI
To:     Maxime Ripard <maxime.ripard@bootlin.com>
Cc:     David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
        Chen-Yu Tsai <wens@csie.org>,
        Michael Turquette <mturquette@baylibre.com>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        linux-clk <linux-clk@vger.kernel.org>,
        dri-devel <dri-devel@lists.freedesktop.org>,
        devicetree <devicetree@vger.kernel.org>,
        Michael Trimarchi <michael@amarulasolutions.com>,
        linux-amarula@amarulasolutions.com,
        linux-sunxi <linux-sunxi@googlegroups.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, Feb 12, 2019 at 3:00 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
>
> On Mon, Feb 11, 2019 at 07:37:57PM +0530, Jagan Teki wrote:
> > Hi Maxime,
> >
> > On Fri, Feb 1, 2019 at 8:01 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > >
> > > On Tue, Jan 29, 2019 at 11:01:31PM +0530, Jagan Teki wrote:
> > > > On Tue, Jan 29, 2019 at 8:43 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > >
> > > > > On Mon, Jan 28, 2019 at 03:06:10PM +0530, Jagan Teki wrote:
> > > > > > On Sat, Jan 26, 2019 at 2:54 AM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > > > > > >
> > > > > > > On Fri, Jan 25, 2019 at 01:28:49AM +0530, Jagan Teki wrote:
> > > > > > > > Minimum PLL used for MIPI is 500MHz, as per manual, but
> > > > > > > > lowering the min rate by 300MHz can result proper working
> > > > > > > > nkms divider with the help of desired dclock rate from
> > > > > > > > panel driver.
> > > > > > > >
> > > > > > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > > > > > > Acked-by: Stephen Boyd <sboyd@kernel.org>
> > > > > > >
> > > > > > > Going 200MHz below the minimum doesn't seem really reasonable. What
> > > > > > > is the issue that you are trying to fix here?
> > > > > > >
> > > > > > > It looks like it's picking bad dividers, but if that's the case, this
> > > > > > > isn't the proper fix.
> > > > > >
> > > > > > As I stated in earlier patches, the whole idea is pick the desired
> > > > > > dclk divider based dclk rate. So the dotclock, sun4i_dclk_round_rate
> > > > > > is unable to get the proper dclk divider at the end, so it eventually
> > > > > > picking up wrong divider value and fired vblank timeout.
> > > > > >
> > > > > > So, we come-up with optimal and working min_rate 300MHz in pll-mipi to
> > > > > > get the desired clock something like below.
> > > > > > [    2.415773] [drm] No driver support for vblank timestamp query.
> > > > > > [    2.424116] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000
> > > > > > [    2.424172] ideal = 220000000, rounded = 0
> > > > > > [    2.424176] ideal = 275000000, rounded = 0
> > > > > > [    2.424194] ccu_nkm_round_rate: rate = 330000000
> > > > > > [    2.424197] ideal = 330000000, rounded = 330000000
> > > > > > [    2.424201] sun4i_dclk_round_rate: div = 6 rate = 55000000
> > > > > > [    2.424205] sun4i_dclk_round_rate: min_div = 4 max_div = 127, rate = 55000000
> > > > > > [    2.424209] ideal = 220000000, rounded = 0
> > > > > > [    2.424213] ideal = 275000000, rounded = 0
> > > > > > [    2.424230] ccu_nkm_round_rate: rate = 330000000
> > > > > > [    2.424233] ideal = 330000000, rounded = 330000000
> > > > > > [    2.424236] sun4i_dclk_round_rate: div = 6 rate = 55000000
> > > > > > [    2.424253] ccu_nkm_round_rate: rate = 330000000
> > > > > > [    2.424270] ccu_nkm_round_rate: rate = 330000000
> > > > > > [    2.424278] sun4i_dclk_recalc_rate: val = 1, rate = 330000000
> > > > > > [    2.424281] sun4i_dclk_recalc_rate: val = 1, rate = 330000000
> > > > > > [    2.424306] ccu_nkm_set_rate: rate = 330000000, parent_rate = 297000000
> > > > > > [    2.424309] ccu_nkm_set_rate: _nkm.n = 5
> > > > > > [    2.424311] ccu_nkm_set_rate: _nkm.k = 2
> > > > > > [    2.424313] ccu_nkm_set_rate: _nkm.m = 9
> > > > > > [    2.424661] sun4i_dclk_set_rate div 6
> > > > > > [    2.424668] sun4i_dclk_recalc_rate: val = 6, rate = 55000000
> > > > > >
> > > > > > But look like this wouldn't valid for all other dclock rates, say BPI
> > > > > > panel has 30MHz clock that would failed with this logic.
> > > > > >
> > > > > > On the other side Allwinner BSP calculating dclk divider based on the
> > > > > > SoC's. for A33 [1] it is fixed dclk divider of 4 and for A64 is is
> > > > > > calculated based on the bpp/lanes.
> > > > >
> > > > > It looks like the A64 has the same divider of 4:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c#L12
> > > > >
> > > > > I think you're confusing it with the ratio between the pixel clock and
> > > > > the dotclock, called dsi_div:
> > > > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L198
> > > >
> > > > Ahh.. I thought this initially but as far as DSI clock computation is
> > > > concern, the L12 tcon_div is local variable which is used for edge0
> > > > computation in burst mode and not for the dsi clock computation. Since
> > > > the BSP is unable to get the tcon_div during edge0 computation, they
> > > > defined it locally I think.
> > > >
> > > > You can see the lcd_clk_config() code [2], where we can see DSI clock
> > > > computation using dsi_div value.
> > > >
> > > > Here is dump after the in Line 792 which is after computation[3]
> > > > [   10.800737] lcd_clk_config: dsi_div = 6, tcon_div = 4, lcd_div = 1
> > > > [   10.800743] lcd_clk_config: lcd_dclk_freq = 55, dclk_rate = 55000000
> > > > [   10.800749] lcd_clk_config: lcd_rate = 330000000, pll_rate = 330000000
> > > >
> > > > The above dump the lcd_rate 330MHz is computed with panel clock, 55MHz
> > > > into dsi_div 6. So this can be our actual divider values dclk_min_div,
> > > > dclk_max_div in sun4i_dclk_round_rate (from
> > > > drivers/gpu/drm/sun4i/sun4i_dotclock.c)
> > >
> > > I wish it was in your commit log in the first place, instead of having
> > > to exchange multiple mails over this.
> > >
> > > However, I don't think that's quite true, and it might be a bug in
> > > Allwinner's implementation (or rather something quite confusing).
> > >
> > > You're right that the lcd_rate and pll_rate seem to be generated from
> > > the pixel clock, and it indeed looks like the ratio between the pixel
> > > clock and the TCON dotclock is defined through the number of bits per
> > > lanes.
> > >
> > > However, in this case, dsi_rate is actually the same than lcd_rate,
> > > since pll_rate is going to be divided by dsi_div:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L791
> > >
> > > Since lcd_div is 1, it also means that in this case, dsi_rate ==
> > > dclk_rate.
> > >
> > > The DSI module clock however, is always set to 148.5 MHz. Indeed, if
> > > we look at:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L804
> > >
> > > We can see that the rate in clk_info is used if it's different than
> > > 0. This is filled by disp_al_lcd_get_clk_info, which, in the case of a
> > > DSI panel, will hardcode it to 148.5 MHz:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L164
> > >
> > > So, the DSI clock is set to this here:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L805
> > >
> > > The TCON *module* clock (the one in the clock controller) has been set
> > > to lcd_rate (so the pixel clock times the number of bits per lane) here:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L800
> > >
> > > And the PLL has been set to the same rate here:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L794
> > >
> > > Let's take a step back now: that function we were looking at,
> > > lcd_clk_config, is called by lcd_clk_enable, which is in turn called
> > > by disp_lcd_enable here:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/disp_lcd.c#L1328
> > >
> > > The next function being called is disp_al_lcd_cfg, and that function
> > > will hardcode the TCON dotclock divider to 4, here:
> > > https://github.com/BPI-SINOVOIP/BPI-M64-bsp/blob/master/linux-sunxi/drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/disp_al.c#L240
> > >
> > > So, in the end, the dotclock divider is always 4, the DSI module clock
> > > is set to 148.5 MHz, and the TCON module clock is set to 330MHz. Since
> > > the TCON module clock doesn't have a divider, the PLL is set at that
> > > same value but this is redundant.
> > >
> > > I'll experiment with this and try to see how it works on the A33.
> >
> > How is it with A33?
>
> The conclusions are the one I sent in my last series

In this series?
[PATCH v3 0/8] drm/sun4i: dsi: Add burst mode support