Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261606AbUCKRl2 (ORCPT ); Thu, 11 Mar 2004 12:41:28 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261576AbUCKRl2 (ORCPT ); Thu, 11 Mar 2004 12:41:28 -0500 Received: from eurogra4543-2.clients.easynet.fr ([212.180.52.86]:8838 "HELO server5.heliogroup.fr") by vger.kernel.org with SMTP id S261606AbUCKRj1 (ORCPT ); Thu, 11 Mar 2004 12:39:27 -0500 From: Hubert Tonneau To: linux-kernel@vger.kernel.org Subject: Re: Linux 2.6 no boot report Date: Thu, 11 Mar 2004 17:30:34 GMT Message-ID: <043MZAY12@server5.heliogroup.fr> X-Mailer: Pliant 90 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 28947 Lines: 661 On Thu, Mar 11, 2004 at 04:32:31PM +0000, Hubert Tonneau wrote: > I've successfully run Linux kernel 2.6 on several boxes, with the excepti> on > of the Dell PowerEdge 2600: > The box is: > . dual Xeon > . Fusion SCSI controler > . root partition is software RAID 1 > . Intel pro 1000 ethernet > > It fails with all 2.6 kernel I tried, including the fresh 2.6.4 > No error message at all, the machine just freezes after displaying network > protocols and before displaying VFS root mounting message. You might be interested with these lines that appear in the 2.4.25 boot sequence near the place where 2.6 freezes: <4>SCSI Error: (0:0:0) Status=02h (CHECK CONDITION) <4> Key=6h (UNIT ATTENTION); FRU=00h <4> ASC/ASCQ=29h/02h "SCSI BUS RESET OCCURRED" <4> CDB: 2A 00 11 17 5D BF 00 00 08 00 <4> Here is the 2.4.25 full boot sequence: <4>Linux version 2.4.25 (root@sx270) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 SMP Thu Mar 11 17:43:06 CET 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) <4> BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable) <4> BIOS-e820: 000000007ffe0000 - 000000007ffefc00 (ACPI data) <4> BIOS-e820: 000000007ffefc00 - 000000007ffff000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) <4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) <5>1151MB HIGHMEM available. <5>896MB LOWMEM available. <4>found SMP MP-table at 000fe710 <4>hm, page 000fe000 reserved twice. <4>hm, page 000ff000 reserved twice. <4>hm, page 000f0000 reserved twice. <4>On node 0 totalpages: 524256 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 294880 pages. <6>ACPI: RSDP (v000 DELL ) @ 0x000fdc20 <6>ACPI: RSDT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdc34 <6>ACPI: FADT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdc64 <6>ACPI: MADT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdcd8 <6>ACPI: SPCR (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x000fdd96 <6>ACPI: DSDT (v001 DELL PE2600 0x00000001 MSFT 0x0100000a) @ 0x00000000 <6>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) <4>Processor #2 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) <4>Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) <4>Processor #3 Pentium 4(tm) XEON(tm) APIC version 20 <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) <6>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) <6>Using ACPI for processor (LAPIC) configuration information <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: DELL Product ID: PE 0123 APIC at: 0xFEE00000 <4>I/O APIC #4 Version 32 at 0xFEC00000. <4>I/O APIC #5 Version 32 at 0xFEC80000. <4>I/O APIC #6 Version 32 at 0xFEC81000. <4>I/O APIC #7 Version 32 at 0xFEC82000. <4>I/O APIC #8 Version 32 at 0xFEC82800. <4>Enabling APIC mode: Flat. Using 5 I/O APICs <4>Processors: 4 <4>Kernel command line: BOOT_IMAGE=recover ro root=900 <6>Initializing CPU#0 <4>Detected 2791.809 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 5570.56 BogoMIPS <6>Memory: 2070128k/2097024k available (1125k kernel code, 26512k reserved, 295k data, 112k init, 1179520k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <6>Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 <4>per-CPU timeslice cutoff: 1463.07 usecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000040 <4>ESR value after enabling vector: 00000000 <4>Booting processor 1/1 eip 2000 <6>Initializing CPU#1 <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 5570.56 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 <4>Booting processor 2/2 eip 2000 <6>Initializing CPU#2 <4>masked ExtINT on CPU#2 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 5583.66 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 3 <6>Intel machine check reporting enabled on CPU#2. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 <4>Booting processor 3/3 eip 2000 <6>Initializing CPU#3 <4>masked ExtINT on CPU#3 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 5570.56 BogoMIPS <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 3 <6>Intel machine check reporting enabled on CPU#3. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 <6>Total of 4 processors activated (22295.34 BogoMIPS). <4>cpu_sibling_map[0] = 1 <4>cpu_sibling_map[1] = 0 <4>cpu_sibling_map[2] = 3 <4>cpu_sibling_map[3] = 2 <4>ENABLING IO-APIC IRQs <4>Setting 4 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 4 ... ok. <4>Setting 5 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 5 ... ok. <4>Setting 6 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 6 ... ok. <4>Setting 7 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 7 ... ok. <4>Setting 8 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 8 ... ok. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 4-0, 4-5, 4-11, 4-13, 4-21, 4-22, 4-23, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23, 6-12, 6-13, 6-14, 6-15, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 8-8, 8-9, 8-10, 8-11, 8-12, 8-13, 8-14, 8-15, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 53. <7>number of IO-APIC #4 registers: 24. <7>number of IO-APIC #5 registers: 24. <7>number of IO-APIC #6 registers: 24. <7>number of IO-APIC #7 registers: 24. <7>number of IO-APIC #8 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #4...... <7>.... register #00: 04000000 <7>....... : physical APIC id: 04 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 00000000 <7>....... : arbitration: 00 <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 00F 0F 0 0 0 0 0 1 1 39 <7> 02 00F 0F 0 0 0 0 0 1 1 31 <7> 03 00F 0F 0 0 0 0 0 1 1 41 <7> 04 00F 0F 0 0 0 0 0 1 1 49 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 00F 0F 0 0 0 0 0 1 1 51 <7> 07 00F 0F 0 0 0 0 0 1 1 59 <7> 08 00F 0F 0 0 0 0 0 1 1 61 <7> 09 00F 0F 0 0 0 0 0 1 1 69 <7> 0a 00F 0F 0 0 0 0 0 1 1 71 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 00F 0F 0 0 0 0 0 1 1 79 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 00F 0F 0 0 0 0 0 1 1 81 <7> 0f 00F 0F 0 0 0 0 0 1 1 89 <7> 10 00F 0F 1 1 0 1 0 1 1 91 <7> 11 00F 0F 1 1 0 1 0 1 1 99 <7> 12 00F 0F 1 1 0 1 0 1 1 A1 <7> 13 00F 0F 1 1 0 1 0 1 1 A9 <7> 14 00F 0F 1 1 0 1 0 1 1 B1 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <4> <7>IO APIC #5...... <7>.... register #00: 05000000 <7>....... : physical APIC id: 05 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 05000000 <7>....... : arbitration: 05 <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 00F 0F 1 1 0 1 0 1 1 B9 <7> 01 00F 0F 1 1 0 1 0 1 1 C1 <7> 02 00F 0F 1 1 0 1 0 1 1 C9 <7> 03 00F 0F 1 1 0 1 0 1 1 D1 <7> 04 00F 0F 1 1 0 1 0 1 1 D9 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 000 00 1 0 0 0 0 0 0 00 <7> 07 000 00 1 0 0 0 0 0 0 00 <7> 08 000 00 1 0 0 0 0 0 0 00 <7> 09 000 00 1 0 0 0 0 0 0 00 <7> 0a 000 00 1 0 0 0 0 0 0 00 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 000 00 1 0 0 0 0 0 0 00 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 000 00 1 0 0 0 0 0 0 00 <7> 0f 000 00 1 0 0 0 0 0 0 00 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <4> <7>IO APIC #6...... <7>.... register #00: 06000000 <7>....... : physical APIC id: 06 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 06000000 <7>....... : arbitration: 06 <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 00F 0F 1 1 0 1 0 1 1 E1 <7> 01 00F 0F 1 1 0 1 0 1 1 E9 <7> 02 00F 0F 1 1 0 1 0 1 1 32 <7> 03 00F 0F 1 1 0 1 0 1 1 3A <7> 04 00F 0F 1 1 0 1 0 1 1 42 <7> 05 00F 0F 1 1 0 1 0 1 1 4A <7> 06 00F 0F 1 1 0 1 0 1 1 52 <7> 07 00F 0F 1 1 0 1 0 1 1 5A <7> 08 00F 0F 1 1 0 1 0 1 1 62 <7> 09 00F 0F 1 1 0 1 0 1 1 6A <7> 0a 00F 0F 1 1 0 1 0 1 1 72 <7> 0b 00F 0F 1 1 0 1 0 1 1 7A <7> 0c 000 00 1 0 0 0 0 0 0 00 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 000 00 1 0 0 0 0 0 0 00 <7> 0f 000 00 1 0 0 0 0 0 0 00 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <4> <7>IO APIC #7...... <7>.... register #00: 07000000 <7>....... : physical APIC id: 07 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 07000000 <7>....... : arbitration: 07 <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 00F 0F 1 1 0 1 0 1 1 82 <7> 01 00F 0F 1 1 0 1 0 1 1 8A <7> 02 000 00 1 0 0 0 0 0 0 00 <7> 03 000 00 1 0 0 0 0 0 0 00 <7> 04 000 00 1 0 0 0 0 0 0 00 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 000 00 1 0 0 0 0 0 0 00 <7> 07 000 00 1 0 0 0 0 0 0 00 <7> 08 000 00 1 0 0 0 0 0 0 00 <7> 09 000 00 1 0 0 0 0 0 0 00 <7> 0a 000 00 1 0 0 0 0 0 0 00 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 000 00 1 0 0 0 0 0 0 00 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 000 00 1 0 0 0 0 0 0 00 <7> 0f 000 00 1 0 0 0 0 0 0 00 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <4> <7>IO APIC #8...... <7>.... register #00: 08000000 <7>....... : physical APIC id: 08 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 08000000 <7>....... : arbitration: 08 <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 00F 0F 1 1 0 1 0 1 1 92 <7> 01 00F 0F 1 1 0 1 0 1 1 9A <7> 02 00F 0F 1 1 0 1 0 1 1 A2 <7> 03 00F 0F 1 1 0 1 0 1 1 AA <7> 04 00F 0F 1 1 0 1 0 1 1 B2 <7> 05 00F 0F 1 1 0 1 0 1 1 BA <7> 06 00F 0F 1 1 0 1 0 1 1 C2 <7> 07 00F 0F 1 1 0 1 0 1 1 CA <7> 08 000 00 1 0 0 0 0 0 0 00 <7> 09 000 00 1 0 0 0 0 0 0 00 <7> 0a 000 00 1 0 0 0 0 0 0 00 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 000 00 1 0 0 0 0 0 0 00 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 000 00 1 0 0 0 0 0 0 00 <7> 0f 000 00 1 0 0 0 0 0 0 00 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ12 -> 0:12 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <7>IRQ16 -> 0:16 <7>IRQ17 -> 0:17 <7>IRQ18 -> 0:18 <7>IRQ19 -> 0:19 <7>IRQ20 -> 0:20 <7>IRQ24 -> 1:0 <7>IRQ25 -> 1:1 <7>IRQ26 -> 1:2 <7>IRQ27 -> 1:3 <7>IRQ28 -> 1:4 <7>IRQ48 -> 2:0 <7>IRQ49 -> 2:1 <7>IRQ50 -> 2:2 <7>IRQ51 -> 2:3 <7>IRQ52 -> 2:4 <7>IRQ53 -> 2:5 <7>IRQ54 -> 2:6 <7>IRQ55 -> 2:7 <7>IRQ56 -> 2:8 <7>IRQ57 -> 2:9 <7>IRQ58 -> 2:10 <7>IRQ59 -> 2:11 <7>IRQ72 -> 3:0 <7>IRQ73 -> 3:1 <7>IRQ96 -> 4:0 <7>IRQ97 -> 4:1 <7>IRQ98 -> 4:2 <7>IRQ99 -> 4:3 <7>IRQ100 -> 4:4 <7>IRQ101 -> 4:5 <7>IRQ102 -> 4:6 <7>IRQ103 -> 4:7 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 2791.7565 MHz. <4>..... host bus clock speed is 99.7054 MHz. <4>cpu: 0, clocks: 997054, slice: 199410 <4>CPU0 <4>cpu: 1, clocks: 997054, slice: 199410 <4>cpu: 2, clocks: 997054, slice: 199410 <4>cpu: 3, clocks: 997054, slice: 199410 <4>CPU1 <4>CPU2 <4>CPU3 <4>checking TSC synchronization across CPUs: passed. <4>Waiting on wait_init_idle (map = 0xe) <4>All processors have done init_idle <6>PCI: PCI BIOS revision 2.10 entry at 0xfc6ce, last bus=11 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - PCI device 8086:244e <6>PCI: Using IRQ router PIIX/ICH [8086/2480] at 00:1f.0 <6>PCI->APIC IRQ transform: (B0,I29,P0) -> 16 <6>PCI->APIC IRQ transform: (B0,I31,P0) -> 16 <6>PCI->APIC IRQ transform: (B3,I1,P0) -> 28 <6>PCI->APIC IRQ transform: (B9,I13,P0) -> 72 <6>PCI->APIC IRQ transform: (B9,I13,P1) -> 73 <6>PCI->APIC IRQ transform: (B11,I0,P0) -> 16 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS not found. <4>Starting kswapd <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>Detected PS/2 Mouse Port. <6>Real Time Clock Driver v1.10f <6>Intel(R) PRO/1000 Network Driver - version 5.2.20-k1 <6>Copyright (c) 1999-2003 Intel Corporation. <6>eth0: Intel(R) PRO/1000 Network Connection <4>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html <6>See Documentation/networking/vortex.txt <6>0b:00.0: 3Com PCI 3c905C Tornado at 0xcc80. Vers LK1.1.18-ac <4> 00:04:75:c9:70:0c, IRQ 16 <6> product code 564c rev 00.6 date 09-28-02 <7> Internal config register is 1800000, transceivers 0xa. <6> 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. <6> MII transceiver found at address 24, status 7809. <6> Enabling bus-master transmits and whole-frame receives. <6>0b:00.0: scatter/gather enabled. h/w checksums enabled <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH3: IDE controller at PCI slot 00:1f.1 <4>PCI: Enabling device 00:1f.1 (0005 -> 0007) <6>ICH3: chipset revision 2 <6>ICH3: not 100% native mode: will probe irqs later <6> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio <4>hda: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>SCSI subsystem driver Revision: 1.00 <6>Fusion MPT base driver 2.05.11.03 <6>Copyright (c) 1999-2003 LSI Logic Corporation <6>mptbase: Initiating ioc0 bringup <6>ioc0: 53C1030: Capabilities={Initiator} <6>mptbase: Initiating ioc1 bringup <6>ioc1: 53C1030: Capabilities={Initiator} <6>mptbase: 2 MPT adapters found, 2 installed. <6>Fusion MPT SCSI Host driver 2.05.11.03 <6>scsi0 : ioc0: LSI53C1030, FwRev=01000c00h, Ports=1, MaxQ=255, IRQ=72 <6>scsi1 : ioc1: LSI53C1030, FwRev=01000c00h, Ports=1, MaxQ=255, IRQ=73 <4>blk: queue f7bb0a18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: FUJITSU Model: MAP3147NC Rev: 5605 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7bb0818, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: FUJITSU Model: MAP3147NC Rev: 5605 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7bb0618, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: PE/PV Model: 1x2 SCSI BP Rev: 1.1 <4> Type: Processor ANSI SCSI revision: 02 <4>blk: queue f7affc18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LC Rev: DS04 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7adca18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LC Rev: DS04 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7adc818, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LC Rev: DS04 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7adc618, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LC Rev: DS04 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7adc418, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LC Rev: DS04 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7adc218, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LC Rev: DS04 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue f7adc018, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: PE/PV Model: 1x6 SCSI BP Rev: 1.1 <4> Type: Processor ANSI SCSI revision: 02 <4>blk: queue f7a0ee18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 <4>Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 <4>Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0 <4>Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0 <4>Attached scsi disk sde at scsi1, channel 0, id 2, lun 0 <4>Attached scsi disk sdf at scsi1, channel 0, id 3, lun 0 <4>Attached scsi disk sdg at scsi1, channel 0, id 4, lun 0 <4>Attached scsi disk sdh at scsi1, channel 0, id 5, lun 0 <4>SCSI device sda: 286749480 512-byte hdwr sectors (146816 MB) <6>Partition check: <6> sda: sda1 <4>SCSI device sdb: 286749480 512-byte hdwr sectors (146816 MB) <6> sdb: sdb1 <4>SCSI device sdc: 286749480 512-byte hdwr sectors (146816 MB) <6> sdc: sdc1 <4>SCSI device sdd: 286749480 512-byte hdwr sectors (146816 MB) <6> sdd: sdd1 <4>SCSI device sde: 286749480 512-byte hdwr sectors (146816 MB) <6> sde: sde1 <4>SCSI device sdf: 286749480 512-byte hdwr sectors (146816 MB) <6> sdf: sdf1 <4>SCSI device sdg: 286749480 512-byte hdwr sectors (146816 MB) <6> sdg: sdg1 <4>SCSI device sdh: 286749480 512-byte hdwr sectors (146816 MB) <6> sdh: sdh1 <6>md: linear personality registered as nr 1 <6>md: raid0 personality registered as nr 2 <6>md: raid1 personality registered as nr 3 <6>md: raid5 personality registered as nr 4 <6>raid5: measuring checksumming speed <4> 8regs : 3225.200 MB/sec <4> 32regs : 2412.400 MB/sec <4> pIII_sse : 3657.200 MB/sec <4> pII_mmx : 3299.600 MB/sec <4> p5_mmx : 3363.200 MB/sec <4>raid5: using function: pIII_sse (3657.200 MB/sec) <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6> [events: 00000027] <6> [events: 00000027] <6> [events: 00000017] <6> [events: 00000017] <6> [events: 00000017] <6> [events: 00000017] <6> [events: 00000017] <6> [events: 00000017] <6>md: autorun ... <6>md: considering sdh1 ... <6>md: adding sdh1 ... <6>md: adding sdg1 ... <6>md: adding sdf1 ... <6>md: adding sde1 ... <6>md: adding sdd1 ... <6>md: adding sdc1 ... <6>md: created md1 <6>md: bind <6>md: bind <6>md: bind <6>md: bind <6>md: bind <6>md: bind <6>md: running: <6>md: sdh1's event counter: 00000017 <6>md: sdg1's event counter: 00000017 <6>md: sdf1's event counter: 00000017 <6>md: sde1's event counter: 00000017 <6>md: sdd1's event counter: 00000017 <6>md: sdc1's event counter: 00000017 <6>md1: max total readahead window set to 1280k <6>md1: 5 data-disks, max readahead per data-disk: 256k <6>raid5: device sdh1 operational as raid disk 5 <6>raid5: device sdg1 operational as raid disk 4 <6>raid5: device sdf1 operational as raid disk 3 <6>raid5: device sde1 operational as raid disk 2 <6>raid5: device sdd1 operational as raid disk 1 <6>raid5: device sdc1 operational as raid disk 0 <6>raid5: allocated 6429kB for md1 <4>raid5: raid level 5 set md1 active with 6 out of 6 devices, algorithm 0 <4>RAID5 conf printout: <4> --- rd:6 wd:6 fd:0 <4> disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sdc1 <4> disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdd1 <4> disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sde1 <4> disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdf1 <4> disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sdg1 <4> disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdh1 <4>RAID5 conf printout: <4> --- rd:6 wd:6 fd:0 <4> disk 0, s:0, o:1, n:0 rd:0 us:1 dev:sdc1 <4> disk 1, s:0, o:1, n:1 rd:1 us:1 dev:sdd1 <4> disk 2, s:0, o:1, n:2 rd:2 us:1 dev:sde1 <4> disk 3, s:0, o:1, n:3 rd:3 us:1 dev:sdf1 <4> disk 4, s:0, o:1, n:4 rd:4 us:1 dev:sdg1 <4> disk 5, s:0, o:1, n:5 rd:5 us:1 dev:sdh1 <6>md: updating md1 RAID superblock on device <6>md: sdh1 [events: 00000018]<6>(write) sdh1's sb offset: 143371968 <6>md: sdg1 [events: 00000018]<6>(write) sdg1's sb offset: 143371968 <6>md: sdf1 [events: 00000018]<6>(write) sdf1's sb offset: 143371968 <6>md: sde1 [events: 00000018]<6>(write) sde1's sb offset: 143371968 <6>md: sdd1 [events: 00000018]<6>(write) sdd1's sb offset: 143371968 <6>md: sdc1 [events: 00000018]<6>(write) sdc1's sb offset: 143371968 <6>md: considering sdb1 ... <6>md: adding sdb1 ... <6>md: adding sda1 ... <6>md: created md0 <6>md: bind <6>md: bind <6>md: running: <6>md: sdb1's event counter: 00000027 <6>md: sda1's event counter: 00000027 <6>md: RAID level 1 does not need chunksize! Continuing anyway. <6>md0: max total readahead window set to 124k <6>md0: 1 data-disks, max readahead per data-disk: 124k <6>raid1: device sdb1 operational as mirror 1 <6>raid1: device sda1 operational as mirror 0 <6>raid1: raid set md0 active with 2 out of 2 mirrors <6>md: updating md0 RAID superblock on device <6>md: sdb1 [events: 00000028]<6>(write) sdb1's sb offset: 143371968 <6>md: sda1 [events: 00000028]<6>(write) sda1's sb offset: 143371968 <4>SCSI Error: (0:0:0) Status=02h (CHECK CONDITION) <4> Key=6h (UNIT ATTENTION); FRU=00h <4> ASC/ASCQ=29h/02h "SCSI BUS RESET OCCURRED" <4> CDB: 2A 00 11 17 5D BF 00 00 08 00 <4> <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP <6>IP: routing cache hash table of 16384 buckets, 128Kbytes <6>TCP: Hash tables configured (established 262144 bind 65536) <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <4>VFS: Mounted root (ext2 filesystem) readonly. <6>Freeing unused kernel memory: 112k freed <4>raid5: switching cache buffer size, 4096 --> 1024 <4>raid5: switching cache buffer size, 1024 --> 4096 <6>e1000: eth0 NIC Link is Up 100 Mbps Full Duplex - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/