Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Sasha Levin <sashal@kernel.org>
To:     linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc:     Chaitanya Tata <chaitanya.tata@bluwirelesstechnology.com>,
        Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>,
        Johannes Berg <johannes.berg@intel.com>,
        Sasha Levin <sashal@kernel.org>,
        linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 3.18 15/16] cfg80211: extend range deviation for DMG
Date:   Thu, 14 Feb 2019 21:15:45 -0500
Message-Id: <20190215021546.179605-15-sashal@kernel.org>
In-Reply-To: <20190215021546.179605-1-sashal@kernel.org>
References: <20190215021546.179605-1-sashal@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Chaitanya Tata <chaitanya.tata@bluwirelesstechnology.com>

[ Upstream commit 93183bdbe73bbdd03e9566c8dc37c9d06b0d0db6 ]

Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 306464b3acdb..2f1b39577a84 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -688,7 +688,7 @@ static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
  * definitions (the "2.4 GHz band", the "5 GHz band" and the "60GHz band"),
  * however it is safe for now to assume that a frequency rule should not be
  * part of a frequency's band if the start freq or end freq are off by more
- * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 10 GHz for the
+ * than 2 GHz for the 2.4 and 5 GHz bands, and by more than 20 GHz for the
  * 60 GHz band.
  * This resolution can be lowered and should be considered as we add
  * regulatory rule support for other "bands".
@@ -703,7 +703,7 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range,
 	 * with the Channel starting frequency above 45 GHz.
 	 */
 	u32 limit = freq_khz > 45 * ONE_GHZ_IN_KHZ ?
-			10 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
+			20 * ONE_GHZ_IN_KHZ : 2 * ONE_GHZ_IN_KHZ;
 	if (abs(freq_khz - freq_range->start_freq_khz) <= limit)
 		return true;
 	if (abs(freq_khz - freq_range->end_freq_khz) <= limit)
-- 
2.19.1