Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263361AbUCNNZC (ORCPT ); Sun, 14 Mar 2004 08:25:02 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263362AbUCNNZC (ORCPT ); Sun, 14 Mar 2004 08:25:02 -0500 Received: from lech.pse.pl ([194.92.3.7]:52145 "EHLO lech.pse.pl") by vger.kernel.org with ESMTP id S263361AbUCNNY6 (ORCPT ); Sun, 14 Mar 2004 08:24:58 -0500 Date: Sun, 14 Mar 2004 14:24:56 +0100 From: Lech Szychowski To: linux-kernel@vger.kernel.org Subject: Re: bcm5700 driver at 100Mbit? tg3 doesn't do 100Mbit - 2.6.4-mm1 Message-ID: <20040314132456.GA14249@lech.pse.pl> Reply-To: Lech Szychowski Mail-Followup-To: linux-kernel@vger.kernel.org References: <4053F511.1070607@blueyonder.co.uk> <20040314123014.GA8839@merlin.emma.line.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20040314123014.GA8839@merlin.emma.line.org> Organization: Polskie Sieci Elektroenergetyczne S.A. User-Agent: Mutt/1.5.6i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1523 Lines: 36 > > tg3.ko loads, network starts up. Can't connect to 100Mbit network > > switch. The bcm5700 driver in ths SuSE kraxel 2.6.3 kernel works. The > > tg3 is supposed to be a replacement for bcm5700 I believe. Works for me (Dell Latitude D600), both for "NIC to switch"... === Mar 12 16:20:37 y kernel: Linux version 2.6.4-mm1 (lech7@y) (gcc version 3.3.3) #1 Thu Mar 11 14:16:54 CET 2004 [...] Mar 12 16:20:37 y kernel: eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:7b:d8:9d [...] Mar 12 16:20:39 y kernel: tg3: eth0: Link is up at 100 Mbps, half duplex. Mar 12 16:20:39 y kernel: tg3: eth0: Flow control is off for TX and off for RX. === ...and "NIC to NIC" mode: === Mar 14 03:43:08 y kernel: Linux version 2.6.4-mm1 (lech7@y) (gcc version 3.3.3) #1 Thu Mar 11 14:16:54 CET 2004 [...] Mar 14 03:43:08 y kernel: eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0d:56:7b:d8:9d [...] Mar 14 03:43:10 y kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. Mar 14 03:43:10 y kernel: tg3: eth0: Flow control is off for TX and off for RX. === -- Leszek. -- lech7@pse.pl 2:480/33.7 -- REAL programmers use INTEGERS -- -- speaking just for myself... - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/