Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Christophe Roullier <christophe.roullier@st.com>
To:     <robh@kernel.org>, <davem@davemloft.net>, <joabreu@synopsys.com>,
        <mark.rutland@arm.com>, <mcoquelin.stm32@gmail.com>,
        <alexandre.torgue@st.com>, <peppe.cavallaro@st.com>
CC:     <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <netdev@vger.kernel.org>,
        <christophe.roullier@st.com>, <andrew@lunn.ch>
Subject: [PATCH V2 7/8] ARM: dts: stm32: Add Ethernet support on stm32h7 SOC and activate it for eval and disco boards
Date:   Fri, 22 Feb 2019 09:28:08 +0100
Message-ID: <1550824089-19961-8-git-send-email-christophe.roullier@st.com>
In-Reply-To: <1550824089-19961-1-git-send-email-christophe.roullier@st.com>
References: <1550824089-19961-1-git-send-email-christophe.roullier@st.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII
with PHY SMSC LAN8742

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
 arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 15 +++++++++++++++
 arch/arm/boot/dts/stm32h743.dtsi         | 19 +++++++++++++++++++
 arch/arm/boot/dts/stm32h743i-disco.dts   | 17 +++++++++++++++++
 arch/arm/boot/dts/stm32h743i-eval.dts    | 17 +++++++++++++++++
 4 files changed, 68 insertions(+)

diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index 24be8e6..980b276 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -173,6 +173,21 @@
 				};
 			};
 
+			ethernet_rmii: rmii@0 {
+				pins {
+					pinmux = <STM32_PINMUX('G', 11, AF11)>,
+						 <STM32_PINMUX('G', 13, AF11)>,
+						 <STM32_PINMUX('G', 12, AF11)>,
+						 <STM32_PINMUX('C', 4, AF11)>,
+						 <STM32_PINMUX('C', 5, AF11)>,
+						 <STM32_PINMUX('A', 7, AF11)>,
+						 <STM32_PINMUX('C', 1, AF11)>,
+						 <STM32_PINMUX('A', 2, AF11)>,
+						 <STM32_PINMUX('A', 1, AF11)>;
+					slew-rate = <2>;
+				};
+			};
+
 			usart1_pins: usart1@0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index cbdd69c..f6384af 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -511,6 +511,25 @@
 				status = "disabled";
 			};
 		};
+
+		syscfg: system-config@58000400 {
+			compatible = "syscon";
+			reg = <0x58000400 0x400>;
+		};
+
+		mac: ethernet@40028000 {
+			compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
+			reg = <0x40028000 0x8000>;
+			reg-names = "stmmaceth";
+			interrupts = <61>;
+			interrupt-names = "macirq";
+			clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx",
+			"syscfg-clk";
+			clocks = <&rcc ETH1MAC_CK>, <&rcc ETH1TX_CK>, <&rcc ETH1RX_CK>, <&rcc SYSCFG_CK>;
+			st,syscon = <&syscfg 0x4>;
+			snps,pbl = <8>;
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts
index 45e088c..26ddd52 100644
--- a/arch/arm/boot/dts/stm32h743i-disco.dts
+++ b/arch/arm/boot/dts/stm32h743i-disco.dts
@@ -66,6 +66,23 @@
 	clock-frequency = <25000000>;
 };
 
+&mac {
+	status = "okay";
+	pinctrl-0	= <&ethernet_rmii>;
+	pinctrl-names	= "default";
+	phy-mode	= "rmii";
+	phy-handle	= <&phy1>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
 &usart2 {
 	pinctrl-0 = <&usart2_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts
index 3f8e0c4..c1c1cc1 100644
--- a/arch/arm/boot/dts/stm32h743i-eval.dts
+++ b/arch/arm/boot/dts/stm32h743i-eval.dts
@@ -104,6 +104,23 @@
 	status = "okay";
 };
 
+&mac {
+	status = "okay";
+	pinctrl-0	= <&ethernet_rmii>;
+	pinctrl-names	= "default";
+	phy-mode	= "rmii";
+	phy-handle	= <&phy1>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins>;
 	pinctrl-names = "default";
-- 
2.7.4