Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261743AbUCPOSA (ORCPT ); Tue, 16 Mar 2004 09:18:00 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261898AbUCPOSA (ORCPT ); Tue, 16 Mar 2004 09:18:00 -0500 Received: from mtagate3.de.ibm.com ([195.212.29.152]:26294 "EHLO mtagate3.de.ibm.com") by vger.kernel.org with ESMTP id S261743AbUCPNxT (ORCPT ); Tue, 16 Mar 2004 08:53:19 -0500 Date: Tue, 16 Mar 2004 14:52:36 +0100 From: Martin Schwidefsky To: akpm@osdl.org, linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org Subject: [PATCH] s390 (10/10): zfcp log messages part 2. Message-ID: <20040316135236.GK2785@mschwid3.boeblingen.de.ibm.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.5.1+cvs20040105i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 84673 Lines: 2160 zfcp host adapter log message cleanup part 2: - Shorten log output. - Increase log level for some messages. - Always print leading zeroes for wwpn and fcp-lun. diffstat: drivers/s390/scsi/zfcp_fsf.c | 704 ++++++++++++++++-------------------------- drivers/s390/scsi/zfcp_fsf.h | 10 drivers/s390/scsi/zfcp_qdio.c | 102 ++---- drivers/s390/scsi/zfcp_scsi.c | 92 ++--- 4 files changed, 360 insertions(+), 548 deletions(-) diff -urN linux-2.6/drivers/s390/scsi/zfcp_fsf.c linux-2.6-s390/drivers/s390/scsi/zfcp_fsf.c --- linux-2.6/drivers/s390/scsi/zfcp_fsf.c Tue Mar 16 14:08:13 2004 +++ linux-2.6-s390/drivers/s390/scsi/zfcp_fsf.c Tue Mar 16 14:08:20 2004 @@ -250,8 +250,7 @@ /* cleanup request if requested by initiator */ if (likely(cleanup)) { - ZFCP_LOG_TRACE("removing FSF request 0x%lx\n", - (unsigned long) fsf_req); + ZFCP_LOG_TRACE("removing FSF request %p\n", fsf_req); /* * lock must not be held here since it will be * grabed by the called routine, too @@ -259,8 +258,7 @@ zfcp_fsf_req_cleanup(fsf_req); } else { /* notify initiator waiting for the requests completion */ - ZFCP_LOG_TRACE("waking initiator of FSF request 0x%lx\n", - (unsigned long) fsf_req); + ZFCP_LOG_TRACE("waking initiator of FSF request %p\n",fsf_req); /* * FIXME: Race! We must not access fsf_req here as it might have been * cleaned up already due to the set ZFCP_STATUS_FSFREQ_COMPLETED @@ -297,7 +295,7 @@ int retval = 0; struct zfcp_adapter *adapter = fsf_req->adapter; - ZFCP_LOG_DEBUG("QTCB is at 0x%lx\n", (unsigned long) fsf_req->qtcb); + ZFCP_LOG_DEBUG("QTCB is at %p\n", fsf_req->qtcb); if (fsf_req->status & ZFCP_STATUS_FSFREQ_DISMISSED) { ZFCP_LOG_DEBUG("fsf_req 0x%lx has been dismissed\n", @@ -352,18 +350,6 @@ case FSF_PROT_QTCB_VERSION_ERROR: ZFCP_LOG_FLAGS(0, "FSF_PROT_QTCB_VERSION_ERROR\n"); - /* DEBUG */ - ZFCP_LOG_NORMAL("fsf_req=0x%lx, qtcb=0x%lx (0x%lx, 0x%lx)\n", - (unsigned long) fsf_req, - (unsigned long) fsf_req->qtcb, - ((unsigned long) fsf_req) & 0xFFFFFF00, - (unsigned - long) ((struct zfcp_fsf_req - *) (((unsigned long) fsf_req) & - 0xFFFFFF00))->qtcb); - ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, - (char *) (((unsigned long) fsf_req) & 0xFFFFFF00), - sizeof (struct zfcp_fsf_req)); ZFCP_LOG_NORMAL("error: The adapter %s contains " "microcode of version 0x%x, the device driver " "only supports 0x%x. Aborting.\n", @@ -414,17 +400,6 @@ "that used on adapter %s. " "Stopping all operations on this adapter.\n", zfcp_get_busid_by_adapter(adapter)); - ZFCP_LOG_NORMAL("fsf_req=0x%lx, qtcb=0x%lx (0x%lx, 0x%lx)\n", - (unsigned long) fsf_req, - (unsigned long) fsf_req->qtcb, - ((unsigned long) fsf_req) & 0xFFFFFF00, - (unsigned long) ( - (struct zfcp_fsf_req *) ( - ((unsigned long) - fsf_req) & 0xFFFFFF00))->qtcb); - ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, - (char *) (((unsigned long) fsf_req) & 0xFFFFFF00), - sizeof (struct zfcp_fsf_req)); debug_text_exception(adapter->erp_dbf, 0, "prot_unsup_qtcb"); zfcp_erp_adapter_shutdown(adapter, 0); zfcp_cmd_dbf_event_fsf("unsqtcbt", fsf_req, @@ -447,7 +422,7 @@ case FSF_PROT_DUPLICATE_REQUEST_ID: ZFCP_LOG_FLAGS(0, "FSF_PROT_DUPLICATE_REQUEST_IDS\n"); if (fsf_req->qtcb) { - ZFCP_LOG_NORMAL("bug: The request identifier 0x%Lx " + ZFCP_LOG_NORMAL("bug: The request identifier 0x%Lx " "to the adapter %s is ambiguous. " "Stopping all operations on this " "adapter.\n", @@ -456,13 +431,13 @@ req_handle), zfcp_get_busid_by_adapter(adapter)); } else { - ZFCP_LOG_NORMAL("bug: The request identifier 0x%lx " + ZFCP_LOG_NORMAL("bug: The request identifier %p " "to the adapter %s is ambiguous. " "Stopping all operations on this " "adapter. " "(bug: got this for an unsolicited " "status read request)\n", - (unsigned long) fsf_req, + fsf_req, zfcp_get_busid_by_adapter(adapter)); } debug_text_exception(adapter->erp_dbf, 0, "prot_dup_id"); @@ -581,19 +556,6 @@ "(debug info 0x%x).\n", zfcp_get_busid_by_adapter(adapter), fsf_req->qtcb->prefix.prot_status); - ZFCP_LOG_NORMAL("fsf_req=0x%lx, qtcb=0x%lx (0x%lx, 0x%lx)\n", - (unsigned long) fsf_req, - (unsigned long) fsf_req->qtcb, - ((unsigned long) fsf_req) & 0xFFFFFF00, - (unsigned - long) ((struct zfcp_fsf_req - *) (((unsigned long) fsf_req) & - 0xFFFFFF00))->qtcb); - ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, - (char *) (((unsigned long) fsf_req) & 0xFFFFFF00), - sizeof (struct zfcp_fsf_req)); - ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, (char *) fsf_req->qtcb, - sizeof(struct fsf_qtcb)); debug_text_event(adapter->erp_dbf, 0, "prot_inval:"); debug_exception(adapter->erp_dbf, 0, &fsf_req->qtcb->prefix.prot_status, @@ -776,9 +738,7 @@ int retval = 0; if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ERROR)) { - ZFCP_LOG_TRACE("fsf_req=0x%lx, QTCB=0x%lx\n", - (unsigned long) fsf_req, - (unsigned long) (fsf_req->qtcb)); + ZFCP_LOG_TRACE("fsf_req=%p, QTCB=%p\n", fsf_req, fsf_req->qtcb); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) fsf_req->qtcb, sizeof(struct fsf_qtcb)); } @@ -849,10 +809,8 @@ ZFCP_LOG_FLAGS(2, "FSF_QTCB_UNKNOWN\n"); fsf_req->status |= ZFCP_STATUS_FSFREQ_ERROR; ZFCP_LOG_NORMAL("bug: Command issued by the device driver is " - "not supported by the adapter %s " - "(debug info 0x%lx 0x%x).\n", - zfcp_get_busid_by_adapter(fsf_req->adapter), - (unsigned long) fsf_req, fsf_req->fsf_command); + "not supported by the adapter %s\n", + zfcp_get_busid_by_adapter(fsf_req->adapter)); if (fsf_req->fsf_command != fsf_req->qtcb->header.fsf_command) ZFCP_LOG_NORMAL ("bug: Command issued by the device driver differs " @@ -895,9 +853,8 @@ adapter->pool.fsf_req_status_read, &lock_flags, &fsf_req); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "unsolicited status buffer for " - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not create unsolicited status " + "buffer for adapter %s.\n", zfcp_get_busid_by_adapter(adapter)); goto failed_req_create; } @@ -929,8 +886,7 @@ goto failed_req_send; } - ZFCP_LOG_TRACE("Status Read request initiated " - "(adapter busid=%s)\n", + ZFCP_LOG_TRACE("Status Read request initiated (adapter%s)\n", zfcp_get_busid_by_adapter(adapter)); #ifdef ZFCP_DEBUG_REQUESTS debug_text_event(adapter->req_dbf, 1, "unso"); @@ -966,9 +922,9 @@ read_unlock_irqrestore(&zfcp_data.config_lock, flags); if (!port || (port->d_id != (status_buffer->d_id & ZFCP_DID_MASK))) { - ZFCP_LOG_NORMAL("bug: Re-open port indication received for the " - "non-existing port with DID 0x%3.3x, on " - "the adapter %s. Ignored.\n", + ZFCP_LOG_NORMAL("bug: Reopen port indication received for" + "nonexisting port with d_id 0x%08x on " + "adapter %s. Ignored.\n", status_buffer->d_id & ZFCP_DID_MASK, zfcp_get_busid_by_adapter(adapter)); goto out; @@ -993,9 +949,9 @@ debug_exception(adapter->erp_dbf, 0, &status_buffer->status_subtype, sizeof (u32)); ZFCP_LOG_NORMAL("bug: Undefined status subtype received " - "for a re-open indication on the port with " - "DID 0x%3.3x, on the adapter " - "%s. Ignored. (debug info 0x%x)\n", + "for a reopen indication on port with " + "d_id 0x%08x on the adapter %s. " + "Ignored. (debug info 0x%x)\n", status_buffer->d_id, zfcp_get_busid_by_adapter(adapter), status_buffer->status_subtype); @@ -1059,9 +1015,8 @@ case FSF_STATUS_READ_LINK_UP: ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_LINK_UP\n"); debug_text_event(adapter->erp_dbf, 2, "unsol_link_up:"); - ZFCP_LOG_INFO("The local link to the adapter %s " - "was re-plugged. " - "Re-starting operations on this adapter..\n", + ZFCP_LOG_INFO("Local link to adapter %s was replugged. " + "Restarting operations on this adapter\n", zfcp_get_busid_by_adapter(adapter)); /* All ports should be marked as ready to run again */ zfcp_erp_modify_adapter_status(adapter, @@ -1097,9 +1052,8 @@ case FSF_STATUS_READ_CFDC_UPDATED: ZFCP_LOG_FLAGS(1, "FSF_STATUS_READ_CFDC_UPDATED\n"); debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_update:"); - ZFCP_LOG_NORMAL( - "CFDC has been updated on the adapter %s\n", - zfcp_get_busid_by_adapter(adapter)); + ZFCP_LOG_INFO("CFDC has been updated on the adapter %s\n", + zfcp_get_busid_by_adapter(adapter)); break; case FSF_STATUS_READ_CFDC_HARDENED: @@ -1107,21 +1061,17 @@ debug_text_event(adapter->erp_dbf, 2, "unsol_cfdc_harden:"); switch (status_buffer->status_subtype) { case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE: - ZFCP_LOG_NORMAL( - "CFDC of the adapter %s " - "has been saved on the SE\n", - zfcp_get_busid_by_adapter(adapter)); + ZFCP_LOG_INFO("CFDC of adapter %s saved on SE\n", + zfcp_get_busid_by_adapter(adapter)); break; case FSF_STATUS_READ_SUB_CFDC_HARDENED_ON_SE2: - ZFCP_LOG_NORMAL( - "CFDC of the adapter %s " - "has been copied to the secondary SE\n", + ZFCP_LOG_INFO("CFDC of adapter %s has been copied " + "to the secondary SE\n", zfcp_get_busid_by_adapter(adapter)); break; default: - ZFCP_LOG_NORMAL( - "CFDC of the adapter %s has been hardened\n", - zfcp_get_busid_by_adapter(adapter)); + ZFCP_LOG_INFO("CFDC of adapter %s has been hardened\n", + zfcp_get_busid_by_adapter(adapter)); } break; @@ -1130,11 +1080,10 @@ debug_exception(adapter->erp_dbf, 0, &status_buffer->status_type, sizeof (u32)); ZFCP_LOG_NORMAL("bug: An unsolicited status packet of unknown " - "type was received by the zfcp-driver " - "(debug info 0x%x)\n", + "type was received (debug info 0x%x)\n", status_buffer->status_type); - ZFCP_LOG_DEBUG("Dump of status_read_buffer 0x%lx:\n", - (unsigned long) status_buffer); + ZFCP_LOG_DEBUG("Dump of status_read_buffer %p:\n", + status_buffer); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, (char *) status_buffer, sizeof (struct fsf_status_read_buffer)); @@ -1158,17 +1107,15 @@ */ retval = zfcp_fsf_status_read(adapter, 0); if (retval < 0) { - ZFCP_LOG_INFO("Outbound queue busy. " - "Could not create use an " - "unsolicited status read request for " - "the adapter %s.\n", + ZFCP_LOG_INFO("Failed to create unsolicited status read " + "request for the adapter %s.\n", zfcp_get_busid_by_adapter(adapter)); /* temporary fix to avoid status read buffer shortage */ adapter->status_read_failed++; if ((ZFCP_STATUS_READS_RECOM - adapter->status_read_failed) < ZFCP_STATUS_READ_FAILED_THRESHOLD) { - ZFCP_LOG_INFO("restart adapter due to status read " - "buffer shortage (busid %s)\n", + ZFCP_LOG_INFO("restart adapter %s due to status read " + "buffer shortage\n", zfcp_get_busid_by_adapter(adapter)); zfcp_erp_adapter_reopen(adapter, 0); } @@ -1204,11 +1151,9 @@ req_flags, adapter->pool.fsf_req_abort, &lock_flags, &fsf_req); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "abort command request on the device with " - "the FCP-LUN 0x%Lx connected to " - "the port with WWPN 0x%Lx connected to " - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Failed to create an abort command " + "request for lun 0x%016Lx on port 0x%016Lx " + "on adapter %s.\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_adapter(adapter)); @@ -1234,9 +1179,8 @@ retval = zfcp_fsf_req_send(fsf_req, NULL); if (retval) { del_timer(&adapter->scsi_er_timer); - ZFCP_LOG_INFO("error: Could not send an abort command request " - "for a command on the adapter %s, " - "port WWPN 0x%Lx and unit LUN 0x%Lx\n", + ZFCP_LOG_INFO("error: Failed to send abort command request " + "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n", zfcp_get_busid_by_adapter(adapter), unit->port->wwpn, unit->fcp_lun); zfcp_fsf_req_free(fsf_req); @@ -1245,10 +1189,10 @@ } ZFCP_LOG_DEBUG("Abort FCP Command request initiated " - "(adapter busid=%s, port d_id=0x%x, " - "unit fcp_lun=0x%Lx, old_req_id=0x%lx)\n", + "(adapter%s, port d_id=0x%08x, " + "unit x%016Lx, old_req_id=0x%lx)\n", zfcp_get_busid_by_adapter(adapter), - (unsigned int) unit->port->d_id, + unit->port->d_id, unit->fcp_lun, old_req_id); out: write_unlock_irqrestore(&adapter->request_queue.queue_lock, lock_flags); @@ -1292,10 +1236,9 @@ */ } else { ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x " - "for the port with WWPN 0x%Lx connected " - "to the adapter %s is not valid. This " - "may happen occasionally.\n", + ZFCP_LOG_INFO("Temporary port identifier 0x%x for " + "port 0x%016Lx on adapter %s invalid. " + "This may happen occasionally.\n", unit->port->handle, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -1326,11 +1269,9 @@ } else { ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n"); ZFCP_LOG_INFO - ("Warning: Temporary LUN identifier (handle) 0x%x " - "of the logical unit with FCP-LUN 0x%Lx at " - "the remote port with WWPN 0x%Lx connected " - "to the adapter %s is " - "not valid. This may happen in rare cases." + ("Warning: Temporary LUN identifier 0x%x of LUN " + "0x%016Lx on port 0x%016Lx on adapter %s is " + "invalid. This may happen in rare cases. " "Trying to re-establish link.\n", unit->handle, unit->fcp_lun, @@ -1370,10 +1311,9 @@ case FSF_PORT_BOXED: /* 2 */ ZFCP_LOG_FLAGS(0, "FSF_PORT_BOXED\n"); - ZFCP_LOG_DEBUG("The remote port " - "with WWPN 0x%Lx on the adapter %s " - "needs to be reopened\n", - unit->port->wwpn, zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_INFO("Remote port 0x%016Lx on adapter %s needs to " + "be reopened\n", unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); debug_text_event(new_fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed"); zfcp_erp_port_reopen(unit->port, 0); @@ -1487,8 +1427,8 @@ ZFCP_WAIT_FOR_SBAL | ZFCP_REQ_AUTO_CLEANUP, pool, &lock_flags, &fsf_req); if (ret < 0) { - ZFCP_LOG_INFO("error: out of memory. Could not create CT " - "request (FC-GS). (adapter: %s)\n", + ZFCP_LOG_INFO("error: Could not create CT request (FC-GS) for " + "adapter: %s\n", zfcp_get_busid_by_adapter(adapter)); goto failed_req; } @@ -1517,9 +1457,8 @@ ct->req, ct->req_count, ZFCP_MAX_SBALS_PER_CT_REQ); if (bytes <= 0) { - ZFCP_LOG_INFO("error: out of resources (outbuf). " - "Could not create CT request (FC-GS). " - "(adapter: %s)\n", + ZFCP_LOG_INFO("error: creation of CT request failed " + "on adapter %s\n", zfcp_get_busid_by_adapter(adapter)); if (bytes == 0) ret = -ENOMEM; @@ -1535,9 +1474,8 @@ ct->resp, ct->resp_count, ZFCP_MAX_SBALS_PER_CT_REQ); if (bytes <= 0) { - ZFCP_LOG_INFO("error: out of resources (inbuf). " - "Could not create a CT request (FC-GS). " - "(adapter: %s)\n", + ZFCP_LOG_INFO("error: creation of CT request failed " + "on adapter %s\n", zfcp_get_busid_by_adapter(adapter)); if (bytes == 0) ret = -ENOMEM; @@ -1550,8 +1488,8 @@ } else { /* reject send generic request */ ZFCP_LOG_INFO( - "error: microcode does not support chained SBALs." - "CT request (FC-GS) too big. (adapter: %s)\n", + "error: microcode does not support chained SBALs," + "CT request too big (adapter %s)\n", zfcp_get_busid_by_adapter(adapter)); ret = -EOPNOTSUPP; goto failed_send; @@ -1566,14 +1504,13 @@ /* start QDIO request for this FSF request */ ret = zfcp_fsf_req_send(fsf_req, ct->timer); if (ret) { - ZFCP_LOG_DEBUG("error: out of resources. Could not send CT " - "request (FC-GS). (adapter: %s, " - "port WWPN 0x%Lx)\n", + ZFCP_LOG_DEBUG("error: initiation of CT request failed " + "(adapter %s, port 0x%016Lx)\n", zfcp_get_busid_by_adapter(adapter), port->wwpn); goto failed_send; } - ZFCP_LOG_DEBUG("CT request initiated. (adapter: %s, port WWPN 0x%Lx)\n", + ZFCP_LOG_DEBUG("CT request initiated (adapter %s, port 0x%016Lx)\n", zfcp_get_busid_by_adapter(adapter), port->wwpn); goto out; @@ -1631,15 +1568,15 @@ case FSF_SERVICE_CLASS_NOT_SUPPORTED : ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n"); if (adapter->fc_service_class <= 3) { - ZFCP_LOG_INFO("error: The adapter %s does " - "not support fibre-channel class %d.\n", - zfcp_get_busid_by_port(port), + ZFCP_LOG_INFO("error: adapter %s does not support fc " + "class %d.\n", + zfcp_get_busid_by_port(port), adapter->fc_service_class); } else { ZFCP_LOG_INFO("bug: The fibre channel class at the " "adapter %s is invalid. " "(debug info %d)\n", - zfcp_get_busid_by_port(port), + zfcp_get_busid_by_port(port), adapter->fc_service_class); } /* stop operation for this adapter */ @@ -1675,8 +1612,7 @@ case FSF_ACCESS_DENIED: ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); ZFCP_LOG_NORMAL("Access denied, cannot send generic command " - "to a port with WWPN 0x%Lx connected " - "to the adapter %s\n", port->wwpn, + "to port 0x%016Lx on adapter %s\n", port->wwpn, zfcp_get_busid_by_port(port)); for (counter = 0; counter < 2; counter++) { subtable = header->fsf_status_qual.halfword[counter * 2]; @@ -1697,8 +1633,7 @@ case FSF_GENERIC_COMMAND_REJECTED : ZFCP_LOG_FLAGS(2, "FSF_GENERIC_COMMAND_REJECTED\n"); - ZFCP_LOG_INFO("warning: The port with WWPN 0x%Lx connected to " - "the adapter %s has " + ZFCP_LOG_INFO("warning: The port 0x%016Lx on adapter %s has " "rejected a generic services command.\n", port->wwpn, zfcp_get_busid_by_port(port)); ZFCP_LOG_INFO("status qualifier:\n"); @@ -1711,11 +1646,9 @@ case FSF_PORT_HANDLE_NOT_VALID : ZFCP_LOG_FLAGS(2, "FSF_PORT_HANDLE_NOT_VALID\n"); - ZFCP_LOG_DEBUG("Temporary port identifier (handle) 0x%x " - "for the port with WWPN 0x%Lx connected to " - "the adapter %s is " - "not valid. This may happen occasionally.\n", - port->handle, + ZFCP_LOG_DEBUG("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid. This may " + "happen occasionally.\n", port->handle, port->wwpn, zfcp_get_busid_by_port(port)); ZFCP_LOG_INFO("status qualifier:\n"); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_INFO, @@ -1728,8 +1661,7 @@ case FSF_REQUEST_BUF_NOT_VALID : ZFCP_LOG_FLAGS(2, "FSF_REQUEST_BUF_NOT_VALID\n"); - ZFCP_LOG_NORMAL("error: The port with WWPN 0x%Lx connected to " - "the adapter %s has " + ZFCP_LOG_NORMAL("error: The port 0x%016Lx on adapter %s has " "rejected a generic services command " "due to invalid request buffer.\n", port->wwpn, zfcp_get_busid_by_port(port)); @@ -1739,8 +1671,7 @@ case FSF_RESPONSE_BUF_NOT_VALID : ZFCP_LOG_FLAGS(2, "FSF_RESPONSE_BUF_NOT_VALID\n"); - ZFCP_LOG_NORMAL("error: The port with WWPN 0x%Lx connected to " - "the adapter %s has " + ZFCP_LOG_NORMAL("error: The port 0x%016Lx on adapter %s has " "rejected a generic services command " "due to invalid response buffer.\n", port->wwpn, zfcp_get_busid_by_port(port)); @@ -1750,8 +1681,7 @@ case FSF_PORT_BOXED : ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); - ZFCP_LOG_DEBUG("The remote port " - "with WWPN 0x%Lx on the adapter %s " + ZFCP_LOG_INFO("The remote port 0x%016Lx on adapter %s " "needs to be reopened\n", port->wwpn, zfcp_get_busid_by_port(port)); debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed"); @@ -1800,8 +1730,8 @@ ZFCP_WAIT_FOR_SBAL|ZFCP_REQ_AUTO_CLEANUP, NULL, &lock_flags, &fsf_req); if (ret < 0) { - ZFCP_LOG_INFO("error: out of memory. Could not create ELS " - "request. (adapter: %s, port did: 0x%06x)\n", + ZFCP_LOG_INFO("error: creation of ELS request failed " + "(adapter %s, port d_id: 0x%08x)\n", zfcp_get_busid_by_adapter(adapter), port->d_id); goto failed_req; } @@ -1825,9 +1755,8 @@ els->req, els->req_count, ZFCP_MAX_SBALS_PER_ELS_REQ); if (bytes <= 0) { - ZFCP_LOG_INFO("error: out of resources (outbuf). " - "Could not create ELS request. " - "(adapter: %s, port did: 0x%06x)\n", + ZFCP_LOG_INFO("error: creation of ELS request failed " + "(adapter %s, port d_id: 0x%08x)\n", zfcp_get_busid_by_adapter(adapter), port->d_id); if (bytes == 0) { @@ -1844,9 +1773,8 @@ els->resp, els->resp_count, ZFCP_MAX_SBALS_PER_ELS_REQ); if (bytes <= 0) { - ZFCP_LOG_INFO("error: out of resources (inbuf). " - "Could not create ELS request. " - "(adapter: %s, port did: 0x%06x)\n", + ZFCP_LOG_INFO("error: creation of ELS request failed " + "(adapter %s, port d_id: 0x%08x)\n", zfcp_get_busid_by_adapter(adapter), port->d_id); if (bytes == 0) { @@ -1859,9 +1787,9 @@ fsf_req->qtcb->bottom.support.resp_buf_length = bytes; } else { /* reject request */ - ZFCP_LOG_INFO("error: microcode does not support chained SBALs." - "ELS request too big. " - "(adapter: %s, port did: 0x%06x)\n", + ZFCP_LOG_INFO("error: microcode does not support chained SBALs" + ", ELS request too big (adapter %s, " + "port d_id: 0x%08x)\n", zfcp_get_busid_by_adapter(adapter), port->d_id); ret = -EOPNOTSUPP; goto failed_send; @@ -1878,13 +1806,13 @@ /* start QDIO request for this FSF request */ ret = zfcp_fsf_req_send(fsf_req, NULL); if (ret) { - ZFCP_LOG_DEBUG("error: out of resources. Could not send ELS " - "request. (adapter: %s, port WWPN 0x%Lx)\n", + ZFCP_LOG_DEBUG("error: initiation of ELS request failed " + "(adapter %s, port 0x%016Lx)\n", zfcp_get_busid_by_adapter(adapter), port->wwpn); goto failed_send; } - ZFCP_LOG_DEBUG("ELS request initiated (adapter: %s, port WWPN 0x%Lx)\n", + ZFCP_LOG_DEBUG("ELS request initiated (adapter %s, port 0x%016Lx)\n", zfcp_get_busid_by_adapter(adapter), port->wwpn); goto out; @@ -1937,12 +1865,12 @@ case FSF_SERVICE_CLASS_NOT_SUPPORTED: ZFCP_LOG_FLAGS(2, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n"); if (adapter->fc_service_class <= 3) { - ZFCP_LOG_INFO("error: The adapter %s does " - "not support fibre-channel class %d.\n", + ZFCP_LOG_INFO("error: adapter %s does " + "not support fibrechannel class %d.\n", zfcp_get_busid_by_port(port), adapter->fc_service_class); } else { - ZFCP_LOG_INFO("bug: The fibre channel class at the " + ZFCP_LOG_INFO("bug: The fibrechannel class at " "adapter %s is invalid. " "(debug info %d)\n", zfcp_get_busid_by_port(port), @@ -1986,9 +1914,8 @@ case FSF_ELS_COMMAND_REJECTED: ZFCP_LOG_FLAGS(2, "FSF_ELS_COMMAND_REJECTED\n"); - ZFCP_LOG_INFO("The ELS command has been rejected because " - "a command filter in the FCP channel prohibited " - "sending of the ELS to the SAN " + ZFCP_LOG_INFO("ELS has been rejected because command filter " + "prohibited sending " "(adapter: %s, wwpn=0x%016Lx)\n", zfcp_get_busid_by_port(port), port->wwpn); @@ -2106,9 +2033,8 @@ erp_action->adapter->pool.fsf_req_erp, &lock_flags, &(erp_action->fsf_req)); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "exchange configuration data request for" - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not create exchange configuration " + "data request for adapter %s.\n", zfcp_get_busid_by_adapter(erp_action->adapter)); goto out; } @@ -2120,14 +2046,13 @@ erp_action->fsf_req->erp_action = erp_action; erp_action->fsf_req->qtcb->bottom.config.feature_selection = - FSF_FEATURE_CFDC | - FSF_FEATURE_LOST_SAN_NOTIFICATION; + FSF_FEATURE_CFDC; /* start QDIO request for this FSF request */ retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); if (retval) { ZFCP_LOG_INFO - ("error: Could not send an exchange configuration data " + ("error: Could not send exchange configuration data " "command on the adapter %s\n", zfcp_get_busid_by_adapter(erp_action->adapter)); zfcp_fsf_req_free(erp_action->fsf_req); @@ -2135,8 +2060,8 @@ goto out; } - ZFCP_LOG_DEBUG("Exchange Configuration Data request initiated " - "(adapter busid=%s)\n", + ZFCP_LOG_DEBUG("exchange configuration data request initiated " + "(adapter %s)\n", zfcp_get_busid_by_adapter(erp_action->adapter)); out: @@ -2195,9 +2120,9 @@ ZFCP_LOG_INFO("The adapter %s reported " "the following characteristics:\n" - "WWNN 0x%16.16Lx, " - "WWPN 0x%16.16Lx, " - "S_ID 0x%6.6x,\n" + "WWNN 0x%016Lx, " + "WWPN 0x%016Lx, " + "S_ID 0x%08x,\n" "adapter version 0x%x, " "LIC version 0x%x, " "FC link speed %d Gb/s\n", @@ -2233,10 +2158,9 @@ switch (adapter->fc_topology) { case FSF_TOPO_P2P: ZFCP_LOG_FLAGS(1, "FSF_TOPO_P2P\n"); - ZFCP_LOG_NORMAL("error: Point-to-point fibre-channel " - "configuration detected " - "at the adapter %s, not " - "supported, shutting down adapter\n", + ZFCP_LOG_NORMAL("error: Point-to-point fibrechannel " + "configuration detected at adapter %s " + "unsupported, shutting down adapter\n", zfcp_get_busid_by_adapter(adapter)); debug_text_event(fsf_req->adapter->erp_dbf, 0, "top-p-to-p"); @@ -2244,10 +2168,9 @@ goto skip_fsfstatus; case FSF_TOPO_AL: ZFCP_LOG_FLAGS(1, "FSF_TOPO_AL\n"); - ZFCP_LOG_NORMAL("error: Arbitrated loop fibre-channel " - "topology detected " - "at the adapter %s, not " - "supported, shutting down adapter\n", + ZFCP_LOG_NORMAL("error: Arbitrated loop fibrechannel " + "topology detected at adapter %s " + "unsupported, shutting down adapter\n", zfcp_get_busid_by_adapter(adapter)); debug_text_event(fsf_req->adapter->erp_dbf, 0, "top-al"); @@ -2255,13 +2178,12 @@ goto skip_fsfstatus; case FSF_TOPO_FABRIC: ZFCP_LOG_FLAGS(1, "FSF_TOPO_FABRIC\n"); - ZFCP_LOG_INFO("Switched fabric fibre-channel " - "network detected " - "at the adapter %s.\n", + ZFCP_LOG_INFO("Switched fabric fibrechannel " + "network detected at adapter %s.\n", zfcp_get_busid_by_adapter(adapter)); break; default: - ZFCP_LOG_NORMAL("bug: The fibre-channel topology " + ZFCP_LOG_NORMAL("bug: The fibrechannel topology " "reported by the exchange " "configuration command for " "the adapter %s is not " @@ -2326,10 +2248,8 @@ erp_action->adapter->pool.fsf_req_erp, &lock_flags, &(erp_action->fsf_req)); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "open port request for " - "the port with WWPN 0x%Lx connected to " - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not create open port request " + "for port 0x%016Lx on adapter %s.\n", erp_action->port->wwpn, zfcp_get_busid_by_adapter(erp_action->adapter)); goto out; @@ -2348,10 +2268,8 @@ /* start QDIO request for this FSF request */ retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); if (retval) { - ZFCP_LOG_INFO("error: Could not send an " - "open port request for " - "the port with WWPN 0x%Lx connected to " - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not send open port request for " + "port 0x%016Lx on adapter %s.\n", erp_action->port->wwpn, zfcp_get_busid_by_adapter(erp_action->adapter)); zfcp_fsf_req_free(erp_action->fsf_req); @@ -2359,8 +2277,8 @@ goto out; } - ZFCP_LOG_DEBUG("Open Port request initiated " - "(adapter busid=%s, port wwpn=0x%Lx)\n", + ZFCP_LOG_DEBUG("open port request initiated " + "(adapter %s, port 0x%016Lx)\n", zfcp_get_busid_by_adapter(erp_action->adapter), erp_action->port->wwpn); out: @@ -2398,8 +2316,7 @@ case FSF_PORT_ALREADY_OPEN: ZFCP_LOG_FLAGS(0, "FSF_PORT_ALREADY_OPEN\n"); - ZFCP_LOG_NORMAL("bug: The remote port with WWPN=0x%Lx " - "connected to the adapter %s " + ZFCP_LOG_NORMAL("bug: remote port 0x%016Lx on adapter %s " "is already open.\n", port->wwpn, zfcp_get_busid_by_port(port)); debug_text_exception(fsf_req->adapter->erp_dbf, 0, @@ -2412,8 +2329,8 @@ case FSF_ACCESS_DENIED: ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); - ZFCP_LOG_NORMAL("Access denied, cannot open port " - "with WWPN 0x%Lx connected to the adapter %s\n", + ZFCP_LOG_NORMAL("Access denied, cannot open port 0x%016Lx " + "on adapter %s\n", port->wwpn, zfcp_get_busid_by_port(port)); for (counter = 0; counter < 2; counter++) { subtable = header->fsf_status_qual.halfword[counter * 2]; @@ -2436,8 +2353,7 @@ case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED: ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED\n"); ZFCP_LOG_INFO("error: The FSF adapter is out of resources. " - "The remote port with WWPN=0x%Lx " - "connected to the adapter %s " + "The remote port 0x%016Lx on adapter %s " "could not be opened. Disabling it.\n", port->wwpn, zfcp_get_busid_by_port(port)); debug_text_event(fsf_req->adapter->erp_dbf, 1, @@ -2465,9 +2381,9 @@ break; case FSF_SQ_NO_RETRY_POSSIBLE: ZFCP_LOG_FLAGS(0, "FSF_SQ_NO_RETRY_POSSIBLE\n"); - ZFCP_LOG_NORMAL("The remote port with WWPN=0x%Lx " - "connected to the adapter %s " - "could not be opened. Disabling it.\n", + ZFCP_LOG_NORMAL("The remote port 0x%016Lx on " + "adapter %s could not be opened. " + "Disabling it.\n", port->wwpn, zfcp_get_busid_by_port(port)); debug_text_exception(fsf_req->adapter->erp_dbf, 0, @@ -2493,11 +2409,9 @@ ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); /* save port handle assigned by FSF */ port->handle = header->port_handle; - ZFCP_LOG_INFO("The remote port (WWPN=0x%Lx) via adapter " - "(busid=%s) was opened, it's " - "port handle is 0x%x\n", - port->wwpn, - zfcp_get_busid_by_port(port), + ZFCP_LOG_INFO("The remote port 0x%016Lx via adapter %s " + "was opened, it's port handle is 0x%x\n", + port->wwpn, zfcp_get_busid_by_port(port), port->handle); /* mark port as open */ atomic_set_mask(ZFCP_STATUS_COMMON_OPEN | @@ -2533,9 +2447,9 @@ /* skip sanity check and assume wwpn is ok */ } else { if (plogi->serv_param.wwpn != port->wwpn) { - ZFCP_LOG_INFO("warning: D_ID of port " - "with WWPN 0x%Lx changed " - "during open\n", port->wwpn); + ZFCP_LOG_INFO("warning: d_id of port " + "0x%016Lx changed during " + "open\n", port->wwpn); debug_text_event( fsf_req->adapter->erp_dbf, 0, "fsf_s_did_change:"); @@ -2585,9 +2499,8 @@ erp_action->adapter->pool.fsf_req_erp, &lock_flags, &(erp_action->fsf_req)); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create a " - "close port request for WWPN 0x%Lx connected to " - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not create a close port request " + "for port 0x%016Lx on adapter %s.\n", erp_action->port->wwpn, zfcp_get_busid_by_adapter(erp_action->adapter)); goto out; @@ -2607,9 +2520,8 @@ /* start QDIO request for this FSF request */ retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); if (retval) { - ZFCP_LOG_INFO("error: Could not send a " - "close port request for WWPN 0x%Lx connected to " - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not send a close port request for " + "port 0x%016Lx on adapter %s.\n", erp_action->port->wwpn, zfcp_get_busid_by_adapter(erp_action->adapter)); zfcp_fsf_req_free(erp_action->fsf_req); @@ -2617,8 +2529,8 @@ goto out; } - ZFCP_LOG_TRACE("Close Port request initiated " - "(adapter busid=%s, port wwpn=0x%Lx)\n", + ZFCP_LOG_TRACE("close port request initiated " + "(adapter %s, port 0x%016Lx)\n", zfcp_get_busid_by_adapter(erp_action->adapter), erp_action->port->wwpn); out: @@ -2652,11 +2564,9 @@ case FSF_PORT_HANDLE_NOT_VALID: ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x " - "for the port with WWPN 0x%Lx connected to " - "the adapter %s is " - "not valid. This may happen occasionally.\n", - port->handle, + ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid. This may happen " + "occasionally.\n", port->handle, port->wwpn, zfcp_get_busid_by_port(port)); ZFCP_LOG_DEBUG("status qualifier:\n"); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, @@ -2678,11 +2588,9 @@ case FSF_GOOD: ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); - ZFCP_LOG_TRACE("remote port (WWPN=0x%Lx) via adapter " - "(busid=%s) closed, port handle 0x%x\n", - port->wwpn, - zfcp_get_busid_by_port(port), - port->handle); + ZFCP_LOG_TRACE("remote port 0x016%Lx on adapter %s closed, " + "port handle 0x%x\n", port->wwpn, + zfcp_get_busid_by_port(port), port->handle); zfcp_erp_modify_port_status(port, ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR); @@ -2726,12 +2634,11 @@ erp_action->adapter->pool.fsf_req_erp, &lock_flags, &erp_action->fsf_req); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create a " - "close physical port request for " - "the port with WWPN 0x%Lx connected to " - "the adapter %s.\n", - erp_action->port->wwpn, - zfcp_get_busid_by_adapter(erp_action->adapter)); + ZFCP_LOG_INFO("error: Could not create close physical port " + "request (adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn); + goto out; } @@ -2748,18 +2655,17 @@ /* start QDIO request for this FSF request */ retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); if (retval) { - ZFCP_LOG_INFO("error: Could not send an close physical port " - "request for the port with WWPN 0x%Lx connected " - "to the adapter %s.\n", - erp_action->port->wwpn, - zfcp_get_busid_by_adapter(erp_action->adapter)); + ZFCP_LOG_INFO("error: Could not send close physical port " + "request (adapter %s, port 0x%016Lx)\n", + zfcp_get_busid_by_adapter(erp_action->adapter), + erp_action->port->wwpn); zfcp_fsf_req_free(erp_action->fsf_req); erp_action->fsf_req = NULL; goto out; } - ZFCP_LOG_TRACE("Close Physical Port request initiated " - "(adapter busid=%s, port wwpn=0x%Lx)\n", + ZFCP_LOG_TRACE("close physical port request initiated " + "(adapter %s, port 0x%016Lx)\n", zfcp_get_busid_by_adapter(erp_action->adapter), erp_action->port->wwpn); out: @@ -2797,13 +2703,12 @@ case FSF_PORT_HANDLE_NOT_VALID: ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x " - "for the port with WWPN 0x%Lx connected to " - "the adapter %s is not valid. This may happen " - "occasionally.\n", + ZFCP_LOG_INFO("Temporary port identifier 0x%x invalid" + "(adapter %s, port 0x%016Lx). " + "This may happen occasionally.\n", port->handle, - port->wwpn, - zfcp_get_busid_by_port(port)); + zfcp_get_busid_by_port(port), + port->wwpn); ZFCP_LOG_DEBUG("status qualifier:\n"); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, (char *) &header->fsf_status_qual, @@ -2817,8 +2722,8 @@ case FSF_ACCESS_DENIED: ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); ZFCP_LOG_NORMAL("Access denied, cannot close " - "physical port with WWPN 0x%Lx connected to " - "the adapter %s\n", port->wwpn, + "physical port 0x%016Lx on " + "adapter %s\n", port->wwpn, zfcp_get_busid_by_port(port)); for (counter = 0; counter < 2; counter++) { subtable = header->fsf_status_qual.halfword[counter * 2]; @@ -2839,7 +2744,7 @@ case FSF_PORT_BOXED: ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); - ZFCP_LOG_DEBUG("The remote port with WWPN 0x%Lx on the adapter " + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter " "%s needs to be reopened but it was attempted " "to close it physically.\n", port->wwpn, @@ -2884,9 +2789,8 @@ case FSF_GOOD: ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); - ZFCP_LOG_DEBUG("Remote port (WWPN=0x%Lx) via adapter " - "(busid=%s) physically closed, " - "port handle 0x%x\n", + ZFCP_LOG_DEBUG("Remote port 0x%016Lx via adapter %s " + "physically closed, port handle 0x%x\n", port->wwpn, zfcp_get_busid_by_port(port), port->handle); /* can't use generic zfcp_erp_modify_port_status because @@ -2939,10 +2843,8 @@ erp_action->adapter->pool.fsf_req_erp, &lock_flags, &(erp_action->fsf_req)); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "open unit request for FCP-LUN 0x%Lx connected " - "to the port with WWPN 0x%Lx connected to " - "the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not create open unit request for " + "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n", erp_action->unit->fcp_lun, erp_action->unit->port->wwpn, zfcp_get_busid_by_adapter(erp_action->adapter)); @@ -2961,15 +2863,13 @@ atomic_set_mask(ZFCP_STATUS_COMMON_OPENING, &erp_action->unit->status); erp_action->fsf_req->data.open_unit.unit = erp_action->unit; erp_action->fsf_req->erp_action = erp_action; -// erp_action->fsf_req->qtcb->bottom.support.option = -// FSF_OPEN_LUN_UNSOLICITED_SENSE_DATA; /* start QDIO request for this FSF request */ retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); if (retval) { ZFCP_LOG_INFO("error: Could not send an open unit request " - "on the adapter %s, port WWPN 0x%Lx for " - "unit LUN 0x%Lx\n", + "on the adapter %s, port 0x%016Lx for " + "unit 0x%016Lx\n", zfcp_get_busid_by_adapter(erp_action->adapter), erp_action->port->wwpn, erp_action->unit->fcp_lun); @@ -2978,8 +2878,8 @@ goto out; } - ZFCP_LOG_TRACE("Open LUN request initiated (adapter busid=%s, " - "port wwpn=0x%Lx, unit fcp_lun=0x%Lx)\n", + ZFCP_LOG_TRACE("Open LUN request initiated (adapter %s, " + "port 0x%016Lx, unit 0x%016Lx)\n", zfcp_get_busid_by_adapter(erp_action->adapter), erp_action->port->wwpn, erp_action->unit->fcp_lun); out: @@ -3020,10 +2920,9 @@ case FSF_PORT_HANDLE_NOT_VALID: ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x " - "for the port with WWPN 0x%Lx connected to " - "the adapter %s is " - "not valid. This may happen occasionally.\n", + ZFCP_LOG_INFO("Temporary port identifier 0x%x " + "for port 0x%016Lx on adapter %s invalid " + "This may happen occasionally\n", unit->port->handle, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); ZFCP_LOG_DEBUG("status qualifier:\n"); @@ -3037,10 +2936,8 @@ case FSF_LUN_ALREADY_OPEN: ZFCP_LOG_FLAGS(0, "FSF_LUN_ALREADY_OPEN\n"); - ZFCP_LOG_NORMAL("bug: Attempted to open the logical unit " - "with FCP-LUN 0x%Lx at " - "the remote port with WWPN 0x%Lx connected " - "to the adapter %s twice.\n", + ZFCP_LOG_NORMAL("bug: Attempted to open unit 0x%016Lx on " + "remote port 0x%016Lx on adapter %s twice.\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); debug_text_exception(adapter->erp_dbf, 0, @@ -3050,11 +2947,10 @@ case FSF_ACCESS_DENIED: ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); - ZFCP_LOG_NORMAL("Access denied, cannot open unit " - "with FCP-LUN 0x%Lx at the remote port with " - "WWPN 0x%Lx connected to the adapter %s\n", - unit->fcp_lun, unit->port->wwpn, - zfcp_get_busid_by_unit(unit)); + ZFCP_LOG_NORMAL("Access denied, cannot open unit 0x%016Lx on " + "remote port 0x%016Lx on adapter %s\n", + unit->fcp_lun, unit->port->wwpn, + zfcp_get_busid_by_unit(unit)); for (counter = 0; counter < 2; counter++) { subtable = header->fsf_status_qual.halfword[counter * 2]; rule = header->fsf_status_qual.halfword[counter * 2 + 1]; @@ -3075,8 +2971,7 @@ case FSF_PORT_BOXED: ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); - ZFCP_LOG_DEBUG("The remote port " - "with WWPN 0x%Lx on the adapter %s " + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " "needs to be reopened\n", unit->port->wwpn, zfcp_get_busid_by_unit(unit)); debug_text_event(adapter->erp_dbf, 2, "fsf_s_pboxed"); @@ -3102,9 +2997,8 @@ case FSF_SQ_CFDC_SUBTABLE_PORT_WWPN: case FSF_SQ_CFDC_SUBTABLE_PORT_DID: case FSF_SQ_CFDC_SUBTABLE_LUN: - ZFCP_LOG_NORMAL("Access to FCP-LUN 0x%Lx at the " - "remote port with WWPN 0x%Lx " - "connected to the adapter %s " + ZFCP_LOG_NORMAL("Access to unit 0x%016Lx on " + "port 0x%016Lx on adapter %s " "is denied (%s rule %d)\n", unit->fcp_lun, unit->port->wwpn, @@ -3128,9 +3022,8 @@ ZFCP_LOG_FLAGS(1, "FSF_MAXIMUM_NUMBER_OF_LUNS_EXCEEDED\n"); ZFCP_LOG_INFO("error: The adapter ran out of resources. " "There is no handle (temporary port identifier) " - "available for the unit with FCP-LUN 0x%Lx " - "at the remote port with WWPN 0x%Lx connected " - "to the adapter %s\n", + "available for unit 0x%016Lx on port 0x%016Lx " + "on adapter %s\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -3187,18 +3080,14 @@ ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); /* save LUN handle assigned by FSF */ unit->handle = header->lun_handle; - ZFCP_LOG_TRACE("unit (FCP_LUN=0x%Lx) of remote port " - "(WWPN=0x%Lx) via adapter (busid=%s) opened, " - "port handle 0x%x, access flag 0x%02x\n", + ZFCP_LOG_TRACE("unit 0x%016Lx on remote port 0x%016Lx on " + "adapter %s opened, port handle 0x%x\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit), - unit->handle, - bottom->lun_access); + unit->handle); /* mark unit as open */ atomic_set_mask(ZFCP_STATUS_COMMON_OPEN, &unit->status); - if (adapter->supported_features & FSF_FEATURE_CFDC) - unit->lun_access = bottom->lun_access; retval = 0; break; @@ -3244,10 +3133,8 @@ erp_action->adapter->pool.fsf_req_erp, &lock_flags, &(erp_action->fsf_req)); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create a " - "close unit request for FCP-LUN 0x%Lx " - "connected to the port with WWPN 0x%Lx connected " - "to the adapter %s.\n", + ZFCP_LOG_INFO("error: Could not create close unit request for " + "unit 0x%016Lx on port 0x%016Lx on adapter %s.\n", erp_action->unit->fcp_lun, erp_action->port->wwpn, zfcp_get_busid_by_adapter(erp_action->adapter)); @@ -3270,8 +3157,7 @@ retval = zfcp_fsf_req_send(erp_action->fsf_req, &erp_action->timer); if (retval) { ZFCP_LOG_INFO("error: Could not send a close unit request for " - "FCP-LUN 0x%Lx connected to the port with " - "WWPN 0x%Lx connected to the adapter %s.\n", + "unit 0x%016Lx on port 0x%016Lx onadapter %s.\n", erp_action->unit->fcp_lun, erp_action->port->wwpn, zfcp_get_busid_by_adapter(erp_action->adapter)); @@ -3280,8 +3166,8 @@ goto out; } - ZFCP_LOG_TRACE("Close LUN request initiated (adapter busid=%s, " - "port wwpn=0x%Lx, unit fcp_lun=0x%Lx)\n", + ZFCP_LOG_TRACE("Close LUN request initiated (adapter %s, " + "port 0x%016Lx, unit 0x%016Lx)\n", zfcp_get_busid_by_adapter(erp_action->adapter), erp_action->port->wwpn, erp_action->unit->fcp_lun); out: @@ -3315,9 +3201,8 @@ case FSF_PORT_HANDLE_NOT_VALID: ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x " - "for the port with WWPN 0x%Lx connected to " - "the adapter %s is not valid. This may " + ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid. This may " "happen in rare circumstances\n", unit->port->handle, unit->port->wwpn, @@ -3337,11 +3222,9 @@ case FSF_LUN_HANDLE_NOT_VALID: ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary LUN identifier (handle) 0x%x " - "of the logical unit with FCP-LUN 0x%Lx at " - "the remote port with WWPN 0x%Lx connected " - "to the adapter %s is " - "not valid. This may happen occasionally.\n", + ZFCP_LOG_INFO("Temporary LUN identifier 0x%x of unit " + "0x%016Lx on port 0x%016Lx on adapter %s is " + "invalid. This may happen occasionally.\n", unit->handle, unit->fcp_lun, unit->port->wwpn, @@ -3361,8 +3244,7 @@ case FSF_PORT_BOXED: ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); - ZFCP_LOG_DEBUG("The remote port " - "with WWPN 0x%Lx on the adapter %s " + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " "needs to be reopened\n", unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -3408,9 +3290,8 @@ case FSF_GOOD: ZFCP_LOG_FLAGS(3, "FSF_GOOD\n"); - ZFCP_LOG_TRACE("unit (FCP_LUN=0x%Lx) of remote port " - "(WWPN=0x%Lx) via adapter (busid=%s) closed, " - "port handle 0x%x \n", + ZFCP_LOG_TRACE("unit 0x%016Lx on port 0x%016Lx on adapter %s " + "closed, port handle 0x%x\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit), @@ -3462,10 +3343,9 @@ adapter->pool.fsf_req_scsi, &lock_flags, &fsf_req); if (unlikely(retval < 0)) { - ZFCP_LOG_DEBUG("error: Out of resources. Could not create an " - "FCP command request for FCP-LUN 0x%Lx " - "connected to the port with WWPN 0x%Lx " - "connected to the adapter %s.\n", + ZFCP_LOG_DEBUG("error: Could not create FCP command request " + "for unit 0x%016Lx on port 0x%016Lx on " + "adapter %s\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_adapter(adapter)); @@ -3494,8 +3374,7 @@ #endif fsf_req->data.send_fcp_command_task.unit = unit; - ZFCP_LOG_DEBUG("unit=0x%lx, unit_fcp_lun=0x%Lx\n", - (unsigned long) unit, unit->fcp_lun); + ZFCP_LOG_DEBUG("unit=%p, fcp_lun=0x%016Lx\n", unit, unit->fcp_lun); /* set handles of unit and its parent port in QTCB */ fsf_req->qtcb->header.lun_handle = unit->handle; @@ -3590,9 +3469,9 @@ retval = -EIO; } else { ZFCP_LOG_NORMAL("error: No truncation implemented but " - "required. Shutting down unit " - "(busid=%s, WWPN=0x%16.16Lx, " - "FCP_LUN=0x%16.16Lx)\n", + "required. Shutting down unit " + "(adapter %s, port 0x%016Lx, " + "unit 0x%016Lx)\n", zfcp_get_busid_by_unit(unit), unit->port->wwpn, unit->fcp_lun); @@ -3615,17 +3494,16 @@ */ retval = zfcp_fsf_req_send(fsf_req, NULL); if (unlikely(retval < 0)) { - ZFCP_LOG_INFO("error: Could not send an FCP command request " - "for a command on the adapter %s, " - "port WWPN 0x%Lx and unit LUN 0x%Lx\n", + ZFCP_LOG_INFO("error: Could not send FCP command request " + "on adapter %s, port 0x%016Lx, unit 0x%016Lx\n", zfcp_get_busid_by_adapter(adapter), unit->port->wwpn, unit->fcp_lun); goto send_failed; } - ZFCP_LOG_TRACE("Send FCP Command initiated (adapter busid=%s, " - "port wwpn=0x%Lx, unit fcp_lun=0x%Lx)\n", + ZFCP_LOG_TRACE("Send FCP Command initiated (adapter %s, " + "port 0x%016Lx, unit 0x%016Lx)\n", zfcp_get_busid_by_adapter(adapter), unit->port->wwpn, unit->fcp_lun); @@ -3676,10 +3554,9 @@ adapter->pool.fsf_req_scsi, &lock_flags, &fsf_req); if (retval < 0) { - ZFCP_LOG_INFO("error: Out of resources. Could not create an " - "FCP command (task management) request for " - "the adapter %s, port with " - "WWPN 0x%Lx and FCP_LUN 0x%Lx.\n", + ZFCP_LOG_INFO("error: Could not create FCP command (task " + "management) request for adapter %s, port " + " 0x%016Lx, unit 0x%016Lx.\n", zfcp_get_busid_by_adapter(adapter), unit->port->wwpn, unit->fcp_lun); goto out; @@ -3722,8 +3599,8 @@ if (retval) { del_timer(&adapter->scsi_er_timer); ZFCP_LOG_INFO("error: Could not send an FCP-command (task " - "management) on the adapter %s, port WWPN " - "0x%Lx for unit LUN 0x%Lx\n", + "management) on adapter %s, port 0x%016Lx for " + "unit LUN 0x%016Lx\n", zfcp_get_busid_by_adapter(adapter), unit->port->wwpn, unit->fcp_lun); @@ -3733,8 +3610,8 @@ } ZFCP_LOG_TRACE("Send FCP Command (task management function) initiated " - "(adapter busid=%s, port wwpn=0x%Lx, " - "unit fcp_lun=0x%Lx, tm_flags=0x%x)\n", + "(adapter %s, port 0x%016Lx, unit 0x%016Lx, " + "tm_flags=0x%x)\n", zfcp_get_busid_by_adapter(adapter), unit->port->wwpn, unit->fcp_lun, @@ -3776,9 +3653,8 @@ case FSF_PORT_HANDLE_NOT_VALID: ZFCP_LOG_FLAGS(1, "FSF_PORT_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary port identifier (handle) 0x%x " - "for the port with WWPN 0x%Lx connected to " - "the adapter %s is not valid.\n", + ZFCP_LOG_INFO("Temporary port identifier 0x%x for port " + "0x%016Lx on adapter %s invalid\n", unit->port->handle, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_DEBUG, @@ -3792,11 +3668,9 @@ case FSF_LUN_HANDLE_NOT_VALID: ZFCP_LOG_FLAGS(1, "FSF_LUN_HANDLE_NOT_VALID\n"); - ZFCP_LOG_INFO("Temporary LUN identifier (handle) 0x%x " - "of the logical unit with FCP-LUN 0x%Lx at " - "the remote port with WWPN 0x%Lx connected " - "to the adapter %s is " - "not valid. This may happen occasionally.\n", + ZFCP_LOG_INFO("Temporary LUN identifier 0x%x for unit " + "0x%016Lx on port 0x%016Lx on adapter %s is " + "invalid. This may happen occasionally.\n", unit->handle, unit->fcp_lun, unit->port->wwpn, @@ -3813,16 +3687,13 @@ case FSF_HANDLE_MISMATCH: ZFCP_LOG_FLAGS(0, "FSF_HANDLE_MISMATCH\n"); - ZFCP_LOG_NORMAL("bug: The port handle (temporary port " - "identifier) 0x%x has changed unexpectedly. " - "This was detected upon receiveing the " - "response of a command send to the unit with " - "FCP-LUN 0x%Lx at the remote port with WWPN " - "0x%Lx connected to the adapter %s.\n", + ZFCP_LOG_NORMAL("bug: The port handle 0x%x has changed " + "unexpectedly. (adapter %s, port 0x%016Lx, " + "unit 0x%016Lx)\n", unit->port->handle, - unit->fcp_lun, + zfcp_get_busid_by_unit(unit), unit->port->wwpn, - zfcp_get_busid_by_unit(unit)); + unit->fcp_lun); ZFCP_LOG_NORMAL("status qualifier:\n"); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, (char *) &header->fsf_status_qual, @@ -3841,11 +3712,11 @@ ZFCP_LOG_FLAGS(0, "FSF_SERVICE_CLASS_NOT_SUPPORTED\n"); if (fsf_req->adapter->fc_service_class <= 3) { ZFCP_LOG_NORMAL("error: The adapter %s does " - "not support fibre-channel class %d.\n", + "not support fibrechannel class %d.\n", zfcp_get_busid_by_unit(unit), fsf_req->adapter->fc_service_class); } else { - ZFCP_LOG_NORMAL("bug: The fibre channel class at the " + ZFCP_LOG_NORMAL("bug: The fibrechannel class at " "adapter %s is invalid. " "(debug info %d)\n", zfcp_get_busid_by_unit(unit), @@ -3864,10 +3735,9 @@ case FSF_FCPLUN_NOT_VALID: ZFCP_LOG_FLAGS(0, "FSF_FCPLUN_NOT_VALID\n"); - ZFCP_LOG_NORMAL("bug: The FCP LUN 0x%Lx behind the remote port " - "of WWPN0x%Lx via the adapter %s does not have " - "the correct unit handle (temporary unit " - "identifier) 0x%x\n", + ZFCP_LOG_NORMAL("bug: unit 0x%016Lx on port 0x%016Lx on " + "adapter %s does not have correct unit " + "handle 0x%x\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit), @@ -3888,11 +3758,10 @@ case FSF_ACCESS_DENIED: ZFCP_LOG_FLAGS(2, "FSF_ACCESS_DENIED\n"); - ZFCP_LOG_NORMAL("Access denied, cannot send FCP " - "command to the unit with FCP-LUN 0x%Lx at the " - "remote port with WWPN 0x%Lx connected to the " + ZFCP_LOG_NORMAL("Access denied, cannot send FCP command to " + "unit 0x%016Lx on port 0x%016Lx on " "adapter %s\n", unit->fcp_lun, unit->port->wwpn, - zfcp_get_busid_by_unit(unit)); + zfcp_get_busid_by_unit(unit)); for (counter = 0; counter < 2; counter++) { subtable = header->fsf_status_qual.halfword[counter * 2]; rule = header->fsf_status_qual.halfword[counter * 2 + 1]; @@ -3912,9 +3781,8 @@ case FSF_DIRECTION_INDICATOR_NOT_VALID: ZFCP_LOG_FLAGS(0, "FSF_DIRECTION_INDICATOR_NOT_VALID\n"); - ZFCP_LOG_INFO("bug: Invalid data direction given for the unit " - "with FCP LUN 0x%Lx at the remote port with " - "WWPN 0x%Lx via the adapter %s " + ZFCP_LOG_INFO("bug: Invalid data direction given for unit " + "0x%016Lx on port 0x%016Lx on adapter %s " "(debug info %d)\n", unit->fcp_lun, unit->port->wwpn, @@ -3935,9 +3803,8 @@ case FSF_INBOUND_DATA_LENGTH_NOT_VALID: ZFCP_LOG_FLAGS(0, "FSF_INBOUND_DATA_LENGTH_NOT_VALID\n"); ZFCP_LOG_NORMAL("bug: An invalid inbound data length field " - "was found in a command for the unit with " - "FCP LUN 0x%Lx of the remote port " - "with WWPN 0x%Lx via the adapter %s.\n", + "was found in a command for unit 0x%016Lx " + "on port 0x%016Lx on adapter %s.\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); /* stop operation for this adapter */ @@ -3955,9 +3822,8 @@ case FSF_OUTBOUND_DATA_LENGTH_NOT_VALID: ZFCP_LOG_FLAGS(0, "FSF_OUTBOUND_DATA_LENGTH_NOT_VALID\n"); ZFCP_LOG_NORMAL("bug: An invalid outbound data length field " - "was found in a command for the unit with " - "FCP LUN 0x%Lx of the remote port " - "with WWPN 0x%Lx via the adapter %s\n.", + "was found in a command unit 0x%016Lx on port " + "0x%016Lx on adapter %s\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -3975,9 +3841,8 @@ ZFCP_LOG_FLAGS(0, "FSF_CMND_LENGTH_NOT_VALID\n"); ZFCP_LOG_NORMAL ("bug: An invalid control-data-block length field " - "was found in a command for the unit with " - "FCP LUN 0x%Lx of the remote port " - "with WWPN 0x%Lx via the adapter %s " "(debug info %d)\n", + "was found in a command for unit 0x%016Lx on port " + "0x%016Lx on adapter %s " "(debug info %d)\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit), fsf_req->qtcb->bottom.io.fcp_cmnd_length); @@ -3994,8 +3859,7 @@ case FSF_PORT_BOXED: ZFCP_LOG_FLAGS(2, "FSF_PORT_BOXED\n"); - ZFCP_LOG_DEBUG("The remote port " - "with WWPN 0x%Lx on the adapter %s " + ZFCP_LOG_DEBUG("The remote port 0x%016Lx on adapter %s " "needs to be reopened\n", unit->port->wwpn, zfcp_get_busid_by_unit(unit)); debug_text_event(fsf_req->adapter->erp_dbf, 2, "fsf_s_pboxed"); @@ -4010,9 +3874,8 @@ case FSF_LUN_BOXED: ZFCP_LOG_FLAGS(0, "FSF_LUN_BOXED\n"); ZFCP_LOG_NORMAL( - "The remote unit with FCP-LUN 0x%Lx " - "at the remote port with WWPN 0x%Lx " - "connected to the adapter %s needs to be reopened\n", + "unit 0x%016Lx on port 0x%016Lx on adapter %s needs " + "to be reopened\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); debug_text_event(fsf_req->adapter->erp_dbf, 1, "fsf_s_lboxed"); @@ -4119,9 +3982,8 @@ scpnt = fsf_req->data.send_fcp_command_task.scsi_cmnd; if (unlikely(!scpnt)) { ZFCP_LOG_DEBUG - ("Command with fsf_req 0x%lx is not associated to " - "a scsi command anymore. Aborted?\n", - (unsigned long) fsf_req); + ("Command with fsf_req %p is not associated to " + "a scsi command anymore. Aborted?\n", fsf_req); goto out; } if (unlikely(fsf_req->status & ZFCP_STATUS_FSFREQ_ABORTED)) { @@ -4179,12 +4041,10 @@ ZFCP_LOG_FLAGS(0, "RSP_CODE_LENGTH_MISMATCH\n"); /* hardware bug */ ZFCP_LOG_NORMAL("bug: FCP response code indictates " - " that the fibre-channel protocol data " + "that the fibrechannel protocol data " "length differs from the burst length. " - "The problem occured on the unit " - "with FCP LUN 0x%Lx connected to the " - "port with WWPN 0x%Lx at the " - "adapter %s", + "The problem occured on unit 0x%016Lx " + "on port 0x%016Lx on adapter %s", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -4199,11 +4059,10 @@ ZFCP_LOG_FLAGS(0, "RSP_CODE_FIELD_INVALID\n"); /* driver or hardware bug */ ZFCP_LOG_NORMAL("bug: FCP response code indictates " - "that the fibre-channel protocol data " - "fields were incorrectly set-up. " + "that the fibrechannel protocol data " + "fields were incorrectly set up. " "The problem occured on the unit " - "with FCP LUN 0x%Lx connected to the " - "port with WWPN 0x%Lx at the " + "0x%016Lx on port 0x%016Lx on " "adapter %s", unit->fcp_lun, unit->port->wwpn, @@ -4220,12 +4079,10 @@ /* hardware bug */ ZFCP_LOG_NORMAL("bug: The FCP response code indicates " "that conflicting values for the " - "fibre-channel payload offset from the " + "fibrechannel payload offset from the " "header were found. " - "The problem occured on the unit " - "with FCP LUN 0x%Lx connected to the " - "port with WWPN 0x%Lx at the " - "adapter %s.\n", + "The problem occured on unit 0x%016Lx " + "on port 0x%016Lx on adapter %s.\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -4240,10 +4097,8 @@ ZFCP_LOG_NORMAL("bug: An invalid FCP response " "code was detected for a command. " "The problem occured on the unit " - "with FCP LUN 0x%Lx connected to the " - "port with WWPN 0x%Lx at the " - "adapter %s " - "(debug info 0x%x)\n", + "0x%016Lx on port 0x%016Lx on " + "adapter %s (debug info 0x%x)\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit), @@ -4283,9 +4138,7 @@ /* check for overrun */ if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_over)) { ZFCP_LOG_INFO("A data overrun was detected for a command. " - "This happened for a command to the unit " - "with FCP LUN 0x%Lx connected to the " - "port with WWPN 0x%Lx at the adapter %s. " + "unit 0x%016Lx, port 0x%016Lx, adapter %s. " "The response data length is " "%d, the original length was %d.\n", unit->fcp_lun, @@ -4298,9 +4151,7 @@ /* check for underrun */ if (unlikely(fcp_rsp_iu->validity.bits.fcp_resid_under)) { ZFCP_LOG_DEBUG("A data underrun was detected for a command. " - "This happened for a command to the unit " - "with FCP LUN 0x%Lx connected to the " - "port with WWPN 0x%Lx at the adapter %s. " + "unit 0x%016Lx, port 0x%016Lx, adapter %s. " "The response data length is " "%d, the original length was %d.\n", unit->fcp_lun, @@ -4469,9 +4320,7 @@ ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_UNSUPP\n"); ZFCP_LOG_NORMAL("bug: A reuested task management function " "is not supported on the target device " - "The corresponding device is the unit with " - "FCP LUN 0x%Lx at the port " - "with WWPN 0x%Lx at the adapter %s\n ", + "unit 0x%016Lx, port 0x%016Lx, adapter %s\n ", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -4481,9 +4330,7 @@ ZFCP_LOG_FLAGS(0, "RSP_CODE_TASKMAN_FAILED\n"); ZFCP_LOG_NORMAL("bug: A reuested task management function " "failed to complete successfully. " - "The corresponding device is the unit with " - "FCP LUN 0x%Lx at the port " - "with WWPN 0x%Lx at the adapter %s.\n", + "unit 0x%016Lx, port 0x%016Lx, adapter %s.\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_unit(unit)); @@ -4492,9 +4339,7 @@ default: ZFCP_LOG_NORMAL("bug: An invalid FCP response " "code was detected for a command. " - "The problem occured on the unit " - "with FCP LUN 0x%Lx connected to the " - "port with WWPN 0x%Lx at the adapter %s " + "unit 0x%016Lx, port 0x%016Lx, adapter %s " "(debug info 0x%x)\n", unit->fcp_lun, unit->port->wwpn, @@ -4837,8 +4682,8 @@ signal); if (signal) { ZFCP_LOG_DEBUG("Caught signal %i while waiting for the " - "completion of the request at 0x%lx\n", - signal, (unsigned long) fsf_req); + "completion of the request at %p\n", + signal, fsf_req); retval = signal; goto out; } @@ -5035,10 +4880,10 @@ if (likely(fsf_req->qtcb)) { fsf_req->qtcb->prefix.req_seq_no = adapter->fsf_req_seq_no; fsf_req->seq_no = adapter->fsf_req_seq_no; - ZFCP_LOG_TRACE("FSF request 0x%lx of adapter 0x%lx gets " + ZFCP_LOG_TRACE("FSF request %p of adapter %s gets " "FSF sequence counter value of %i\n", - (unsigned long) fsf_req, - (unsigned long) adapter, + fsf_req, + zfcp_get_busid_by_adapter(adapter), fsf_req->qtcb->prefix.req_seq_no); } else inc_seq_no = 0; @@ -5054,18 +4899,18 @@ add_timer(timer); } - ZFCP_LOG_TRACE("request queue of adapter with busid=%s: " + ZFCP_LOG_TRACE("request queue of adapter %s: " "next free SBAL is %i, %i free SBALs\n", zfcp_get_busid_by_adapter(adapter), req_queue->free_index, atomic_read(&req_queue->free_count)); - ZFCP_LOG_DEBUG("Calling do QDIO busid=%s, flags=0x%x, queue_no=%i, " - "index_in_queue=%i, count=%i, buffers=0x%lx\n", + ZFCP_LOG_DEBUG("calling do_QDIO adapter %s, flags=0x%x, queue_no=%i, " + "index_in_queue=%i, count=%i, buffers=%p\n", zfcp_get_busid_by_adapter(adapter), QDIO_FLAG_SYNC_OUTPUT, 0, fsf_req->sbal_first, fsf_req->sbal_number, - (unsigned long) &req_queue->buffer[fsf_req->sbal_first]); + &req_queue->buffer[fsf_req->sbal_first]); /* * adjust the number of free SBALs in request queue as well as @@ -5130,8 +4975,9 @@ if (likely(inc_seq_no)) { adapter->fsf_req_seq_no++; ZFCP_LOG_TRACE - ("FSF sequence counter value of adapter 0x%lx " - "increased to %i\n", (unsigned long) adapter, + ("FSF sequence counter value of adapter %s " + "increased to %i\n", + zfcp_get_busid_by_adapter(adapter), adapter->fsf_req_seq_no); } /* count FSF requests pending */ diff -urN linux-2.6/drivers/s390/scsi/zfcp_fsf.h linux-2.6-s390/drivers/s390/scsi/zfcp_fsf.h --- linux-2.6/drivers/s390/scsi/zfcp_fsf.h Tue Mar 16 14:08:13 2004 +++ linux-2.6-s390/drivers/s390/scsi/zfcp_fsf.h Tue Mar 16 14:08:20 2004 @@ -198,23 +198,16 @@ /* channel features */ #define FSF_FEATURE_QTCB_SUPPRESSION 0x00000001 #define FSF_FEATURE_CFDC 0x00000002 -#define FSF_FEATURE_LOST_SAN_NOTIFICATION 0x00000008 #define FSF_FEATURE_HBAAPI_MANAGEMENT 0x00000010 #define FSF_FEATURE_ELS_CT_CHAINED_SBALS 0x00000020 /* option */ #define FSF_OPEN_LUN_SUPPRESS_BOXING 0x00000001 -#define FSF_OPEN_LUN_UNSOLICITED_SENSE_DATA 0x00000002 /* adapter types */ #define FSF_ADAPTER_TYPE_FICON 0x00000001 #define FSF_ADAPTER_TYPE_FICON_EXPRESS 0x00000002 -/* flags */ -#define FSF_CFDC_OPEN_LUN_ALLOWED 0x01 -#define FSF_CFDC_EXCLUSIVE_ACCESS 0x02 -#define FSF_CFDC_OUTBOUND_TRANSFER_ALLOWED 0x10 - /* port types */ #define FSF_HBA_PORTTYPE_UNKNOWN 0x00000001 #define FSF_HBA_PORTTYPE_NOTPRESENT 0x00000003 @@ -401,8 +394,7 @@ u32 service_class; u8 res3[3]; u8 timeout; - u32 lun_access; - u8 res4[180]; + u8 res4[184]; u32 els1_length; u32 els2_length; u32 req_buf_length; diff -urN linux-2.6/drivers/s390/scsi/zfcp_qdio.c linux-2.6-s390/drivers/s390/scsi/zfcp_qdio.c --- linux-2.6/drivers/s390/scsi/zfcp_qdio.c Tue Mar 16 14:08:13 2004 +++ linux-2.6-s390/drivers/s390/scsi/zfcp_qdio.c Tue Mar 16 14:08:20 2004 @@ -76,16 +76,15 @@ struct qdio_buffer *first_in_page = NULL; qdio_buffers_per_page = PAGE_SIZE / sizeof (struct qdio_buffer); - ZFCP_LOG_TRACE("Buffers per page %d.\n", qdio_buffers_per_page); + ZFCP_LOG_TRACE("buffers_per_page=%d\n", qdio_buffers_per_page); for (buf_pos = 0; buf_pos < count; buf_pos++) { if (page_pos == 0) { cur_buf[buf_pos] = (struct qdio_buffer *) get_zeroed_page(GFP_KERNEL); if (cur_buf[buf_pos] == NULL) { - ZFCP_LOG_INFO("error: Could not allocate " - "memory for qdio transfer " - "structures.\n"); + ZFCP_LOG_INFO("error: allocation of " + "QDIO buffer failed \n"); goto out; } first_in_page = cur_buf[buf_pos]; @@ -115,7 +114,7 @@ int qdio_buffers_per_page; qdio_buffers_per_page = PAGE_SIZE / sizeof (struct qdio_buffer); - ZFCP_LOG_TRACE("Buffers per page %d.\n", qdio_buffers_per_page); + ZFCP_LOG_TRACE("buffers_per_page=%d\n", qdio_buffers_per_page); for (buf_pos = 0; buf_pos < count; buf_pos += qdio_buffers_per_page) free_page((unsigned long) cur_buf[buf_pos]); @@ -133,9 +132,8 @@ zfcp_qdio_buffers_enqueue(&(adapter->request_queue.buffer[0]), QDIO_MAX_BUFFERS_PER_Q); if (buffer_count < QDIO_MAX_BUFFERS_PER_Q) { - ZFCP_LOG_DEBUG("error: Out of memory allocating " - "request queue, only %d buffers got. " - "Binning them.\n", buffer_count); + ZFCP_LOG_DEBUG("only %d QDIO buffers allocated for request " + "queue\n", buffer_count); zfcp_qdio_buffers_dequeue(&(adapter->request_queue.buffer[0]), buffer_count); retval = -ENOMEM; @@ -146,12 +144,11 @@ zfcp_qdio_buffers_enqueue(&(adapter->response_queue.buffer[0]), QDIO_MAX_BUFFERS_PER_Q); if (buffer_count < QDIO_MAX_BUFFERS_PER_Q) { - ZFCP_LOG_DEBUG("error: Out of memory allocating " - "response queue, only %d buffers got. " - "Binning them.\n", buffer_count); + ZFCP_LOG_DEBUG("only %d QDIO buffers allocated for response " + "queue", buffer_count); zfcp_qdio_buffers_dequeue(&(adapter->response_queue.buffer[0]), buffer_count); - ZFCP_LOG_TRACE("Deallocating request_queue Buffers.\n"); + ZFCP_LOG_TRACE("freeing request_queue buffers\n"); zfcp_qdio_buffers_dequeue(&(adapter->request_queue.buffer[0]), QDIO_MAX_BUFFERS_PER_Q); retval = -ENOMEM; @@ -165,11 +162,11 @@ void zfcp_qdio_free_queues(struct zfcp_adapter *adapter) { - ZFCP_LOG_TRACE("Deallocating request_queue Buffers.\n"); + ZFCP_LOG_TRACE("freeing request_queue buffers\n"); zfcp_qdio_buffers_dequeue(&(adapter->request_queue.buffer[0]), QDIO_MAX_BUFFERS_PER_Q); - ZFCP_LOG_TRACE("Deallocating response_queue Buffers.\n"); + ZFCP_LOG_TRACE("freeing response_queue buffers\n"); zfcp_qdio_buffers_dequeue(&(adapter->response_queue.buffer[0]), QDIO_MAX_BUFFERS_PER_Q); } @@ -237,8 +234,8 @@ ZFCP_LOG_FLAGS(1, "QDIO_STATUS_LOOK_FOR_ERROR \n"); - ZFCP_LOG_INFO("A qdio problem occured. The status, qdio_error " - "and siga_error are 0x%x, 0x%x and 0x%x\n", + ZFCP_LOG_INFO("QDIO problem occurred (status=0x%x, " + "qdio_error=0x%x, siga_error=0x%x)\n", status, qdio_error, siga_error); if (status & QDIO_STATUS_ACTIVATE_CHECK_CONDITION) { @@ -273,8 +270,8 @@ ZFCP_LOG_FLAGS(1, "SLSB_P_OUTPUT_ERROR\n"); break; default: - ZFCP_LOG_NORMAL("bug: Unknown qdio error reported " - "(debug info 0x%x)\n", qdio_error); + ZFCP_LOG_NORMAL("bug: unknown QDIO error 0x%x\n", + qdio_error); break; } /* Restarting IO on the failed adapter from scratch */ @@ -317,7 +314,7 @@ adapter = (struct zfcp_adapter *) int_parm; queue = &adapter->request_queue; - ZFCP_LOG_DEBUG("busid=%s, first=%d, count=%d\n", + ZFCP_LOG_DEBUG("adapter %s, first=%d, elements_processed=%d\n", zfcp_get_busid_by_adapter(adapter), first_element, elements_processed); @@ -336,7 +333,7 @@ atomic_add(elements_processed, &queue->free_count); ZFCP_LOG_DEBUG("free_count=%d\n", atomic_read(&queue->free_count)); wake_up(&adapter->request_wq); - ZFCP_LOG_DEBUG("Elements_processed = %d, free count=%d\n", + ZFCP_LOG_DEBUG("elements_processed=%d, free count=%d\n", elements_processed, atomic_read(&queue->free_count)); out: return; @@ -383,7 +380,7 @@ */ buffere = &(queue->buffer[first_element]->element[0]); - ZFCP_LOG_DEBUG("first BUFFERE flags=0x%x \n", buffere->flags); + ZFCP_LOG_DEBUG("first BUFFERE flags=0x%x\n", buffere->flags); /* * go through all SBALs from input queue currently * returned by QDIO layer @@ -406,19 +403,20 @@ (void *) buffere->addr); if (retval) { - ZFCP_LOG_NORMAL - ("bug: Inbound packet seems not to " - "have been sent at all. It will be " - "ignored. (debug info 0x%lx, 0x%lx, " - "%d, %d, %s)\n", - (unsigned long) buffere->addr, - (unsigned long) &(buffere->addr), - first_element, elements_processed, - zfcp_get_busid_by_adapter(adapter)); - ZFCP_LOG_NORMAL("Dump of inbound BUFFER %d " - "BUFFERE %d at address 0x%lx\n", - buffer_index, buffere_index, - (unsigned long) buffer); + ZFCP_LOG_NORMAL("bug: unexpected inbound " + "packet on adapter %s " + "(reqid=0x%lx, " + "first_element=%d, " + "elements_processed=%d)\n", + zfcp_get_busid_by_adapter(adapter), + (unsigned long) buffere->addr, + first_element, + elements_processed); + ZFCP_LOG_NORMAL("hex dump of inbound buffer " + "at address %p " + "(buffer_index=%d, " + "buffere_index=%d)\n", buffer, + buffer_index, buffere_index); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, (char *) buffer, SBAL_SIZE); } @@ -445,8 +443,9 @@ count = atomic_read(&queue->free_count) + elements_processed; start = queue->free_index; - ZFCP_LOG_TRACE("Calling do QDIO busid=%s, flags=0x%x, queue_no=%i, " - "index_in_queue=%i, count=%i, buffers=0x%lx\n", + ZFCP_LOG_TRACE("calling do_QDIO on adapter %s (flags=0x%x, " + "queue_no=%i, index_in_queue=%i, count=%i, " + "buffers=0x%lx\n", zfcp_get_busid_by_adapter(adapter), QDIO_FLAG_SYNC_INPUT | QDIO_FLAG_UNDER_INTERRUPT, 0, start, count, (unsigned long) &queue->buffer[start]); @@ -457,15 +456,16 @@ if (unlikely(retval)) { atomic_set(&queue->free_count, count); - ZFCP_LOG_DEBUG("Inbound data regions could not be cleared " - "Transfer queues may be down. " - "(info %d, %d, %d)\n", count, start, retval); + ZFCP_LOG_DEBUG("clearing of inbound data regions failed, " + "queues may be down " + "(count=%d, start=%d, retval=%d)\n", + count, start, retval); } else { queue->free_index += count; queue->free_index %= QDIO_MAX_BUFFERS_PER_Q; atomic_set(&queue->free_count, 0); - ZFCP_LOG_TRACE("%i buffers successfully enqueued to response " - "queue starting at position %i\n", count, start); + ZFCP_LOG_TRACE("%i buffers enqueued to response " + "queue at position %i\n", count, start); } out: return; @@ -493,8 +493,7 @@ /* invalid (per convention used in this driver) */ if (unlikely(!sbale_addr)) { - ZFCP_LOG_NORMAL - ("bug: Inbound data faulty, contains null-pointer!\n"); + ZFCP_LOG_NORMAL("bug: invalid reqid\n"); retval = -EINVAL; goto out; } @@ -503,11 +502,9 @@ fsf_req = (struct zfcp_fsf_req *) sbale_addr; if (unlikely(adapter != fsf_req->adapter)) { - ZFCP_LOG_NORMAL("bug: An inbound FSF acknowledgement was not " - "correct (debug info 0x%lx, 0x%lx, 0%lx) \n", - (unsigned long) fsf_req, - (unsigned long) fsf_req->adapter, - (unsigned long) adapter); + ZFCP_LOG_NORMAL("bug: invalid reqid (fsf_req=%p, " + "fsf_req->adapter=%p, adapter=%p)\n", + fsf_req, fsf_req->adapter, adapter); retval = -EINVAL; goto out; } @@ -519,10 +516,9 @@ } #endif /* ZFCP_DEBUG_REQUESTS */ - ZFCP_LOG_TRACE("fsf_req at 0x%lx, QTCB at 0x%lx\n", - (unsigned long) fsf_req, (unsigned long) fsf_req->qtcb); + ZFCP_LOG_TRACE("fsf_req at %p, QTCB at %p\n", fsf_req, fsf_req->qtcb); if (likely(fsf_req->qtcb)) { - ZFCP_LOG_TRACE("HEX DUMP OF 1ST BUFFERE PAYLOAD (QTCB):\n"); + ZFCP_LOG_TRACE("hex dump of QTCB:\n"); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_TRACE, (char *) fsf_req->qtcb, sizeof(struct fsf_qtcb)); } @@ -893,8 +889,8 @@ for (cur_pos = first; cur_pos < (first + clean_count); cur_pos++) { index = cur_pos % QDIO_MAX_BUFFERS_PER_Q; memset(buf[index], 0, sizeof (struct qdio_buffer)); - ZFCP_LOG_TRACE("zeroing BUFFER %d at address 0x%lx\n", - index, (unsigned long) buf[index]); + ZFCP_LOG_TRACE("zeroing BUFFER %d at address %p\n", + index, buf[index]); } } diff -urN linux-2.6/drivers/s390/scsi/zfcp_scsi.c linux-2.6-s390/drivers/s390/scsi/zfcp_scsi.c --- linux-2.6/drivers/s390/scsi/zfcp_scsi.c Tue Mar 16 14:08:13 2004 +++ linux-2.6-s390/drivers/s390/scsi/zfcp_scsi.c Tue Mar 16 14:08:20 2004 @@ -211,8 +211,8 @@ unit->device = NULL; zfcp_unit_put(unit); } else { - ZFCP_LOG_INFO("no unit associated with SCSI device at " - "address 0x%lx\n", (unsigned long) sdpnt); + ZFCP_LOG_NORMAL("bug: no unit associated with SCSI device at " + "address %p\n", sdpnt); } } @@ -272,11 +272,9 @@ if (unlikely( atomic_test_mask(ZFCP_STATUS_COMMON_ERP_FAILED, &unit->status) || !atomic_test_mask(ZFCP_STATUS_COMMON_RUNNING, &unit->status))) { - ZFCP_LOG_DEBUG("Stopping SCSI IO on the unit with " - "FCP LUN 0x%Lx connected to the port " - "with WWPN 0x%Lx at the adapter %s.\n", - unit->fcp_lun, - unit->port->wwpn, + ZFCP_LOG_DEBUG("stopping SCSI I/O on unit 0x%016Lx on port " + "0x%016Lx on adapter %s\n", + unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_adapter(adapter)); zfcp_scsi_command_fail(scpnt, DID_ERROR); goto out; @@ -284,8 +282,8 @@ if (unlikely( !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &unit->status))) { - ZFCP_LOG_DEBUG("adapter %s not ready or unit with LUN 0x%Lx " - "on the port with WWPN 0x%Lx in recovery.\n", + ZFCP_LOG_DEBUG("adapter %s not ready or unit 0x%016Lx " + "on port 0x%016Lx in recovery\n", zfcp_get_busid_by_unit(unit), unit->fcp_lun, unit->port->wwpn); retval = SCSI_MLQUEUE_DEVICE_BUSY; @@ -296,7 +294,7 @@ ZFCP_REQ_AUTO_CLEANUP); if (unlikely(tmp < 0)) { - ZFCP_LOG_DEBUG("error: Could not send a Send FCP Command\n"); + ZFCP_LOG_DEBUG("error: initiation of Send FCP Cmnd failed\n"); retval = SCSI_MLQUEUE_HOST_BUSY; } else { @@ -447,11 +445,8 @@ min(scpnt->cmd_len, (unsigned char) ZFCP_ABORT_DBF_LENGTH)); #endif - /*TRACE*/ - ZFCP_LOG_INFO - ("Aborting for adapter=0x%lx, busid=%s, scsi_cmnd=0x%lx\n", - (unsigned long) adapter, zfcp_get_busid_by_adapter(adapter), - (unsigned long) scpnt); + ZFCP_LOG_INFO("aborting scsi_cmnd=%p on adapter %s\n", + scpnt, zfcp_get_busid_by_adapter(adapter)); spin_unlock_irq(scsi_host->host_lock); @@ -473,7 +468,7 @@ */ req_data = (union zfcp_req_data *) scpnt->host_scribble; /* DEBUG */ - ZFCP_LOG_DEBUG("req_data=0x%lx\n", (unsigned long) req_data); + ZFCP_LOG_DEBUG("req_data=%p\n", req_data); if (!req_data) { ZFCP_LOG_DEBUG("late command completion overtook abort\n"); /* @@ -493,11 +488,10 @@ dbf_timeout = (jiffies - req_data->send_fcp_command_task.start_jiffies) / HZ; #endif - /* DEBUG */ - ZFCP_LOG_DEBUG("old_fsf_req=0x%lx\n", (unsigned long) old_fsf_req); + ZFCP_LOG_DEBUG("old_fsf_req=%p\n", old_fsf_req); if (!old_fsf_req) { write_unlock_irqrestore(&adapter->abort_lock, flags); - ZFCP_LOG_NORMAL("bug: No old fsf request found.\n"); + ZFCP_LOG_NORMAL("bug: no old fsf request found\n"); ZFCP_LOG_NORMAL("req_data:\n"); ZFCP_HEX_DUMP(ZFCP_LOG_LEVEL_NORMAL, (char *) req_data, sizeof (union zfcp_req_data)); @@ -521,8 +515,7 @@ * Since this lock will not be held, fsf_req may complete * late and may be released meanwhile. */ - ZFCP_LOG_DEBUG("unit=0x%lx, unit_fcp_lun=0x%Lx\n", - (unsigned long) unit, unit->fcp_lun); + ZFCP_LOG_DEBUG("unit 0x%016Lx (%p)\n", unit->fcp_lun, unit); /* * The 'Abort FCP Command' routine may block (call schedule) @@ -537,17 +530,17 @@ new_fsf_req = zfcp_fsf_abort_fcp_command((unsigned long) old_fsf_req, adapter, unit, ZFCP_WAIT_FOR_SBAL); - ZFCP_LOG_DEBUG("new_fsf_req=0x%lx\n", (unsigned long) new_fsf_req); + ZFCP_LOG_DEBUG("new_fsf_req=%p\n", new_fsf_req); if (!new_fsf_req) { retval = FAILED; - ZFCP_LOG_DEBUG("warning: Could not abort SCSI command " - "at 0x%lx\n", (unsigned long) scpnt); + ZFCP_LOG_NORMAL("error: initiation of Abort FCP Cmnd " + "failed\n"); strncpy(dbf_result, "##nores", ZFCP_ABORT_DBF_LENGTH); goto out; } /* wait for completion of abort */ - ZFCP_LOG_DEBUG("Waiting for cleanup....\n"); + ZFCP_LOG_DEBUG("waiting for cleanup...\n"); #ifdef ZFCP_DEBUG_ABORTS /* * FIXME: @@ -620,11 +613,11 @@ spin_unlock_irq(scsi_host->host_lock); if (!unit) { - ZFCP_LOG_NORMAL("bug: Tried to reset a non existant unit.\n"); + ZFCP_LOG_NORMAL("bug: Tried reset for nonexistent unit\n"); retval = SUCCESS; goto out; } - ZFCP_LOG_NORMAL("Resetting Device fcp_lun=0x%Lx\n", unit->fcp_lun); + ZFCP_LOG_NORMAL("resetting unit 0x%016Lx\n", unit->fcp_lun); /* * If we do not know whether the unit supports 'logical unit reset' @@ -638,18 +631,15 @@ retval = zfcp_task_management_function(unit, LOGICAL_UNIT_RESET); if (retval) { - ZFCP_LOG_DEBUG - ("logical unit reset failed (unit=0x%lx)\n", - (unsigned long) unit); + ZFCP_LOG_DEBUG("unit reset failed (unit=%p)\n", unit); if (retval == -ENOTSUPP) atomic_set_mask (ZFCP_STATUS_UNIT_NOTSUPPUNITRESET, &unit->status); /* fall through and try 'target reset' next */ } else { - ZFCP_LOG_DEBUG - ("logical unit reset succeeded (unit=0x%lx)\n", - (unsigned long) unit); + ZFCP_LOG_DEBUG("unit reset succeeded (unit=%p)\n", + unit); /* avoid 'target reset' */ retval = SUCCESS; goto out; @@ -657,12 +647,10 @@ } retval = zfcp_task_management_function(unit, TARGET_RESET); if (retval) { - ZFCP_LOG_DEBUG("target reset failed (unit=0x%lx)\n", - (unsigned long) unit); + ZFCP_LOG_DEBUG("target reset failed (unit=%p)\n", unit); retval = FAILED; } else { - ZFCP_LOG_DEBUG("target reset succeeded (unit=0x%lx)\n", - (unsigned long) unit); + ZFCP_LOG_DEBUG("target reset succeeded (unit=%p)\n", unit); retval = SUCCESS; } out: @@ -682,13 +670,9 @@ fsf_req = zfcp_fsf_send_fcp_command_task_management (adapter, unit, tm_flags, ZFCP_WAIT_FOR_SBAL); if (!fsf_req) { - ZFCP_LOG_INFO("error: Out of resources. Could not create a " - "task management (abort, reset, etc) request " - "for the unit with FCP-LUN 0x%Lx connected to " - "the port with WWPN 0x%Lx connected to " - "the adapter %s.\n", - unit->fcp_lun, - unit->port->wwpn, + ZFCP_LOG_INFO("error: creation of task management request " + "failed for unit 0x%016Lx on port 0x%016Lx on " + "adapter %s\n", unit->fcp_lun, unit->port->wwpn, zfcp_get_busid_by_adapter(adapter)); retval = -ENOMEM; goto out; @@ -727,10 +711,8 @@ spin_unlock_irq(scsi_host->host_lock); unit = (struct zfcp_unit *) scpnt->device->hostdata; - /*DEBUG*/ - ZFCP_LOG_NORMAL("Resetting because of problems with " - "unit=0x%lx, unit_fcp_lun=0x%Lx\n", - (unsigned long) unit, unit->fcp_lun); + ZFCP_LOG_NORMAL("bus reset because of problems with " + "unit 0x%016Lx\n", unit->fcp_lun); zfcp_erp_adapter_reopen(unit->port->adapter, 0); zfcp_erp_wait(unit->port->adapter); retval = SUCCESS; @@ -756,10 +738,8 @@ spin_unlock_irq(scsi_host->host_lock); unit = (struct zfcp_unit *) scpnt->device->hostdata; - /*DEBUG*/ - ZFCP_LOG_NORMAL("Resetting because of problems with " - "unit=0x%lx, unit_fcp_lun=0x%Lx\n", - (unsigned long) unit, unit->fcp_lun); + ZFCP_LOG_NORMAL("host reset because of problems with " + "unit 0x%016Lx\n", unit->fcp_lun); zfcp_erp_adapter_reopen(unit->port->adapter, 0); zfcp_erp_wait(unit->port->adapter); retval = SUCCESS; @@ -785,15 +765,13 @@ adapter->scsi_host = scsi_host_alloc(&zfcp_data.scsi_host_template, sizeof (struct zfcp_adapter *)); if (!adapter->scsi_host) { - ZFCP_LOG_NORMAL("error: Not enough free memory. " - "Could not register adapter %s " - "with the SCSI-stack.\n", + ZFCP_LOG_NORMAL("error: registration with SCSI stack failed " + "for adapter %s ", zfcp_get_busid_by_adapter(adapter)); retval = -EIO; goto out; } - ZFCP_LOG_DEBUG("host registered, scsi_host at 0x%lx\n", - (unsigned long) adapter->scsi_host); + ZFCP_LOG_DEBUG("host registered, scsi_host=%p\n", adapter->scsi_host); /* tell the SCSI stack some characteristics of this adapter */ adapter->scsi_host->max_id = 1; - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/