Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates
 149.199.60.100 as permitted sender) receiver=protection.outlook.com;
 client-ip=149.199.60.100; helo=xsj-pvapsmtpgw02;
From:   Harini Katakam <harini.katakam@xilinx.com>
To:     <nicolas.ferre@microchip.com>, <davem@davemloft.net>,
        <claudiu.beznea@microchip.com>, <andrew@lunn.ch>
CC:     <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <michal.simek@xilinx.com>, <harinikatakamlinux@gmail.com>,
        <harini.katakam@xilinx.com>
Subject: [PATCH v3 1/4] net: macb: Check MDIO state before read/write and use timeouts
Date:   Fri, 1 Mar 2019 16:20:32 +0530
Message-ID: <1551437435-3462-2-git-send-email-harini.katakam@xilinx.com>
In-Reply-To: <1551437435-3462-1-git-send-email-harini.katakam@xilinx.com>
References: <1551437435-3462-1-git-send-email-harini.katakam@xilinx.com>
MIME-Version: 1.0
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 01 Mar 2019 10:50:55.2748
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: da723e71-7eb2-4170-3259-08d69e33c7fb
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.60.100];Helo=[xsj-pvapsmtpgw02]
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BYAPR02MB4918
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Replace the while loop in MDIO read/write functions with a timeout.
In addition, add a check for MDIO bus busy before initiating a new
operation as well to make sure there is no ongoing MDIO operation.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
v3 changes:
Used MACB_BIT for IDLE field

v2 changes:
Use readx_poll_timeout

Changes form RFC:
Cleaned up timeout implementation and moved it to a helper.

 drivers/net/ethernet/cadence/macb.h      |  2 ++
 drivers/net/ethernet/cadence/macb_main.c | 33 ++++++++++++++++++++++++++------
 2 files changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 9bbaad9..f51040f 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -715,6 +715,8 @@
 		__v; \
 	})
 
+#define MACB_READ_NSR(bp)	macb_readl(bp, NSR)
+
 /* struct macb_dma_desc - Hardware DMA descriptor
  * @addr: DMA address of data buffer
  * @ctrl: Control and status bits
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index f2915f2..a19ed2b 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -36,6 +36,7 @@
 #include <linux/ip.h>
 #include <linux/udp.h>
 #include <linux/tcp.h>
+#include <linux/iopoll.h>
 #include "macb.h"
 
 #define MACB_RX_BUFFER_SIZE	128
@@ -79,6 +80,8 @@
  */
 #define MACB_HALT_TIMEOUT	1230
 
+#define MACB_MDIO_TIMEOUT	1000000 /* in usecs */
+
 /* DMA buffer descriptor might be different size
  * depends on hardware configuration:
  *
@@ -318,10 +321,23 @@ static void macb_get_hwaddr(struct macb *bp)
 	eth_hw_addr_random(bp->dev);
 }
 
+static int macb_mdio_wait_for_idle(struct macb *bp)
+{
+	u32 val;
+
+	return readx_poll_timeout(MACB_READ_NSR, bp, val, val & MACB_BIT(IDLE),
+				  1, MACB_MDIO_TIMEOUT);
+}
+
 static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 {
 	struct macb *bp = bus->priv;
 	int value;
+	int err;
+
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
 			      | MACB_BF(RW, MACB_MAN_READ)
@@ -329,9 +345,9 @@ static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 			      | MACB_BF(REGA, regnum)
 			      | MACB_BF(CODE, MACB_MAN_CODE)));
 
-	/* wait for end of transfer */
-	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-		cpu_relax();
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
 
@@ -342,6 +358,11 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 			   u16 value)
 {
 	struct macb *bp = bus->priv;
+	int err;
+
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
 			      | MACB_BF(RW, MACB_MAN_WRITE)
@@ -350,9 +371,9 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 			      | MACB_BF(CODE, MACB_MAN_CODE)
 			      | MACB_BF(DATA, value)));
 
-	/* wait for end of transfer */
-	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-		cpu_relax();
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	return 0;
 }
-- 
2.7.4