Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Fabrice Gasnier <fabrice.gasnier@st.com>
To:     <jic23@kernel.org>
CC:     <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <mcoquelin.stm32@gmail.com>,
        <alexandre.torgue@st.com>, <fabrice.gasnier@st.com>,
        <linux-iio@vger.kernel.org>, <lars@metafoo.de>, <knaack.h@gmx.de>,
        <pmeerw@pmeerw.net>, <linux-stm32@st-md-mailman.stormreply.com>,
        <arnaud.pouliquen@st.com>, <olivier.moysan@st.com>
Subject: [PATCH 0/8] iio: adc: stm32-dfsdm: add buffer modes
Date:   Wed, 6 Mar 2019 09:55:16 +0100
Message-ID: <1551862524-25098-1-git-send-email-fabrice.gasnier@st.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patchset adds support for buffer modes, scan mode and triggers
in STM32 DFSDM ADC driver:
- 1st patch is an improvement
- Patch 2 to 5 are basically precursor patchs that reworks the way to
  configure the dfsdm for the audio part, so it can be common with the
  iio part.
- Last patchs add support for triggered buffer mode (with scan mode and
  hardware triggers)

Fabrice Gasnier (8):
  iio: adc: stm32-dfsdm: make spi_master_freq more accurate
  iio: adc: stm32-dfsdm: continuous mode depends on current mode
  iio: adc: stm32-dfsdm: move dma enable from start_conv() to
    start_dma()
  iio: adc: stm32-dfsdm: move dma slave config to start routine
  iio: adc: stm32-dfsdm: enable hw consumer
  iio: adc: stm32-dfsdm: add support for scan mode
  iio: adc: stm32-dfsdm: add support for buffer modes
  iio: adc: stm32-dfsdm: claim direct mode for raw read and settings

 drivers/iio/adc/stm32-dfsdm-adc.c  | 513 +++++++++++++++++++++++++++++--------
 drivers/iio/adc/stm32-dfsdm-core.c |   9 +-
 2 files changed, 408 insertions(+), 114 deletions(-)

-- 
2.7.4