Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20190304103846.2060-1-narmstrong@baylibre.com>
 <20190304103846.2060-7-narmstrong@baylibre.com> <CAFBinCBnDPcHpOQ1vW1gL6FxgLSxMv-f-qMm_TTCvXfDaFr3zA@mail.gmail.com>
 <6e8b1935-ba91-d06e-be63-cb2632a19654@baylibre.com>
In-Reply-To: <6e8b1935-ba91-d06e-be63-cb2632a19654@baylibre.com>
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Mon, 11 Mar 2019 22:14:27 +0100
Message-ID: <CAFBinCCHZULDQjVeifiag-rzaPopVY7ir42RCGm9Wn6i9-=Qaw@mail.gmail.com>
Subject: Re: [PATCH v2 6/8] phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo
 PHY Driver
To:     Neil Armstrong <narmstrong@baylibre.com>
Cc:     gregkh@linuxfoundation.org, hminas@synopsys.com, balbi@kernel.org,
        kishon@ti.com, linux-amlogic@lists.infradead.org,
        linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Neil,

On Thu, Mar 7, 2019 at 9:44 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> On 06/03/2019 22:04, Martin Blumenstingl wrote:
> > Hi Neil,
> >
> > On Mon, Mar 4, 2019 at 11:40 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
> > [...]
> >> +static int phy_g12a_usb3_init(struct phy *phy)
> >> +{
> >> +       struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
> >> +       int data, ret;
> >> +
> >> +       /* Switch PHY to USB3 */
> >> +       regmap_update_bits(priv->regmap, PHY_R0,
> >> +                          PHY_R0_PCIE_USB3_SWITCH,
> >> +                          PHY_R0_PCIE_USB3_SWITCH);
> > does this automatically clear PHY_R0_PCIE_POWER_STATE (in case the
> > bootloader incorrectly set that)?
>
> Don't forget it's a static configuration, on the board, only USB3 XOR PCIE
> will be available, if the bootloader sets this and the kernel uses USB3,
> or the reverse, one of them is wrong.
I'm specifically asking is because we've seen various GXL/GXM boards
with a bootloader which is configured for the wrong PHY interface
(RGMII != RMII)

> >
> > [...]
> >> +static int phy_g12a_usb3_pcie_init(struct phy *phy)
> >> +{
> >> +       struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy);
> >> +       int ret;
> >> +
> >> +       ret = reset_control_reset(priv->reset);
> >> +       if (ret)
> >> +               return ret;
> >> +
> >> +       if (priv->mode == PHY_TYPE_USB3)
> >> +               return phy_g12a_usb3_init(phy);
> >> +
> >> +       /* Power UP PCIE */
> >> +       regmap_update_bits(priv->regmap, PHY_R0,
> >> +                          PHY_R0_PCIE_POWER_STATE,
> >> +                          FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c));
> > similar to my question above: does this automatically clear
> > PHY_R0_PCIE_USB3_SWITCH (in case the bootloader incorrectly set that)?
>
> Same answer, but I'll investigate to have more details on this register.
>
> It's more an implementation issue, we can change it when PCIe is enabled
> on this platform.
I'm fine with postponing this until we bring up PCIe support on this
platform if you add a comment (preferably marked with "TODO") in the
driver. that makes it obvious to everyone who comes across this in the
PHY driver

with a TODO-comment you can add my:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>


Regards
Martin