Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Yash Shah <yash.shah@sifive.com>
To:     palmer@sifive.com, linux-pwm@vger.kernel.org,
        linux-riscv@lists.infradead.org
Cc:     thierry.reding@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        sachin.ghadi@sifive.com, paul.walmsley@sifive.com,
        Yash Shah <yash.shah@sifive.com>
Subject: [PATCH v9 2/2] pwm: sifive: Add a driver for SiFive SoC PWM
Date:   Tue, 12 Mar 2019 13:41:29 +0530
Message-Id: <1552378289-27245-3-git-send-email-yash.shah@sifive.com>
In-Reply-To: <1552378289-27245-1-git-send-email-yash.shah@sifive.com>
References: <1552378289-27245-1-git-send-email-yash.shah@sifive.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC.

Signed-off-by: Wesley W. Terpstra <wesley@sifive.com>
[Atish: Various fixes and code cleanup]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Yash Shah <yash.shah@sifive.com>
---
 drivers/pwm/Kconfig      |  11 ++
 drivers/pwm/Makefile     |   1 +
 drivers/pwm/pwm-sifive.c | 338 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 350 insertions(+)
 create mode 100644 drivers/pwm/pwm-sifive.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index a8f47df..4a61d1a 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -380,6 +380,17 @@ config PWM_SAMSUNG
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-samsung.
 
+config PWM_SIFIVE
+	tristate "SiFive PWM support"
+	depends on OF
+	depends on COMMON_CLK
+	depends on RISCV || COMPILE_TEST
+	help
+	  Generic PWM framework driver for SiFive SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sifive.
+
 config PWM_SPEAR
 	tristate "STMicroelectronics SPEAr PWM support"
 	depends on PLAT_SPEAR
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 9c676a0..30089ca 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_PWM_RCAR)		+= pwm-rcar.o
 obj-$(CONFIG_PWM_RENESAS_TPU)	+= pwm-renesas-tpu.o
 obj-$(CONFIG_PWM_ROCKCHIP)	+= pwm-rockchip.o
 obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
+obj-$(CONFIG_PWM_SIFIVE)	+= pwm-sifive.o
 obj-$(CONFIG_PWM_SPEAR)		+= pwm-spear.o
 obj-$(CONFIG_PWM_STI)		+= pwm-sti.o
 obj-$(CONFIG_PWM_STM32)		+= pwm-stm32.o
diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
new file mode 100644
index 0000000..4233557
--- /dev/null
+++ b/drivers/pwm/pwm-sifive.c
@@ -0,0 +1,338 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 SiFive
+ * For SiFive's PWM IP block documentation please refer Chapter 14 of
+ * Reference Manual : https://static.dev.sifive.com/FU540-C000-v1.0.pdf
+ *
+ * Limitations:
+ * - When changing both duty cycle and period, we cannot prevent in
+ *   software that the output might produce a period with mixed
+ *   settings (new period length and old duty cycle).
+ * - The hardware cannot generate a 100% duty cycle.
+ * - The hardware generates only inverted output.
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/bitfield.h>
+
+/* Register offsets */
+#define PWM_SIFIVE_PWMCFG		0x0
+#define PWM_SIFIVE_PWMCOUNT		0x8
+#define PWM_SIFIVE_PWMS			0x10
+#define PWM_SIFIVE_PWMCMP0		0x20
+
+/* PWMCFG fields */
+#define PWM_SIFIVE_PWMCFG_SCALE		GENMASK(3, 0)
+#define PWM_SIFIVE_PWMCFG_STICKY	BIT(8)
+#define PWM_SIFIVE_PWMCFG_ZERO_CMP	BIT(9)
+#define PWM_SIFIVE_PWMCFG_DEGLITCH	BIT(10)
+#define PWM_SIFIVE_PWMCFG_EN_ALWAYS	BIT(12)
+#define PWM_SIFIVE_PWMCFG_EN_ONCE	BIT(13)
+#define PWM_SIFIVE_PWMCFG_CENTER	BIT(16)
+#define PWM_SIFIVE_PWMCFG_GANG		BIT(24)
+#define PWM_SIFIVE_PWMCFG_IP		BIT(28)
+
+/* PWM_SIFIVE_SIZE_PWMCMP is used to calculate offset for pwmcmpX registers */
+#define PWM_SIFIVE_SIZE_PWMCMP		4
+#define PWM_SIFIVE_CMPWIDTH		16
+#define PWM_SIFIVE_DEFAULT_PERIOD	10000000
+
+#define div_u64_round(a, b) \
+	({typeof(b) __b = b; div_u64((a) + __b / 2, __b); })
+
+struct pwm_sifive_ddata {
+	struct pwm_chip	chip;
+	struct mutex lock; /* lock to protect user_count */
+	struct notifier_block notifier;
+	struct clk *clk;
+	void __iomem *regs;
+	unsigned int real_period;
+	unsigned int approx_period;
+	int user_count;
+};
+
+static inline
+struct pwm_sifive_ddata *pwm_sifive_chip_to_ddata(struct pwm_chip *c)
+{
+	return container_of(c, struct pwm_sifive_ddata, chip);
+}
+
+static int pwm_sifive_request(struct pwm_chip *chip, struct pwm_device *dev)
+{
+	struct pwm_sifive_ddata *pwm = pwm_sifive_chip_to_ddata(chip);
+
+	mutex_lock(&pwm->lock);
+	pwm->user_count++;
+	mutex_unlock(&pwm->lock);
+
+	return 0;
+}
+
+static void pwm_sifive_free(struct pwm_chip *chip, struct pwm_device *dev)
+{
+	struct pwm_sifive_ddata *pwm = pwm_sifive_chip_to_ddata(chip);
+
+	mutex_lock(&pwm->lock);
+	pwm->user_count--;
+	mutex_unlock(&pwm->lock);
+}
+
+static void pwm_sifive_update_clock(struct pwm_sifive_ddata *pwm,
+				    unsigned long rate)
+{
+	u32 val;
+	unsigned long long num;
+	/*
+	 * The PWM unit is used with pwmzerocmp=0, so the only way to modify the
+	 * period length is using pwmscale which provides the number of bits the
+	 * counter is shifted before being feed to the comparators. A period
+	 * lasts (1 << (PWM_SIFIVE_CMPWIDTH + pwmscale)) clock ticks.
+	 * (1 << (PWM_SIFIVE_CMPWIDTH + scale)) * 10^9/rate = period
+	 */
+	unsigned long scale_pow =
+			div64_ul(pwm->approx_period * (u64)rate, NSEC_PER_SEC);
+	int scale = clamp(ilog2(scale_pow) - PWM_SIFIVE_CMPWIDTH, 0, 0xf);
+
+	val = PWM_SIFIVE_PWMCFG_EN_ALWAYS |
+	      FIELD_PREP(PWM_SIFIVE_PWMCFG_SCALE, scale);
+	writel(val, pwm->regs + PWM_SIFIVE_PWMCFG);
+
+	/* As scale <= 15 the shift operation cannot overflow. */
+	num = (unsigned long long)NSEC_PER_SEC << (PWM_SIFIVE_CMPWIDTH + scale);
+	pwm->real_period = div64_ul(num, rate);
+	dev_dbg(pwm->chip.dev, "New real_period = %u ns\n", pwm->real_period);
+}
+
+static void pwm_sifive_get_state(struct pwm_chip *chip, struct pwm_device *dev,
+				 struct pwm_state *state)
+{
+	struct pwm_sifive_ddata *pwm = pwm_sifive_chip_to_ddata(chip);
+	u32 duty, val;
+
+	duty = readl(pwm->regs + PWM_SIFIVE_PWMCMP0 +
+		     dev->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
+
+	state->enabled = duty > 0;
+
+	val = readl(pwm->regs + PWM_SIFIVE_PWMCFG);
+	if (!(val & PWM_SIFIVE_PWMCFG_EN_ALWAYS))
+		state->enabled = false;
+
+	state->period = pwm->real_period;
+	state->duty_cycle =
+		(u64)duty * pwm->real_period >> PWM_SIFIVE_CMPWIDTH;
+	state->polarity = PWM_POLARITY_INVERSED;
+}
+
+static int pwm_sifive_enable(struct pwm_chip *chip, bool enable)
+{
+	struct pwm_sifive_ddata *pwm = pwm_sifive_chip_to_ddata(chip);
+	int ret;
+
+	if (enable) {
+		ret = clk_enable(pwm->clk);
+		if (ret) {
+			dev_err(pwm->chip.dev, "Enable clk failed:%d\n", ret);
+			return ret;
+		}
+	}
+
+	if (!enable)
+		clk_disable(pwm->clk);
+
+	return 0;
+}
+
+static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *dev,
+			    struct pwm_state *state)
+{
+	struct pwm_sifive_ddata *pwm = pwm_sifive_chip_to_ddata(chip);
+	unsigned int duty_cycle;
+	u32 frac;
+	struct pwm_state cur_state;
+	bool enabled;
+	int ret = 0;
+	unsigned long num;
+
+	if (state->polarity != PWM_POLARITY_INVERSED)
+		return -EINVAL;
+
+	ret = clk_enable(pwm->clk);
+	if (ret) {
+		dev_err(pwm->chip.dev, "Enable clk failed:%d\n", ret);
+		return ret;
+	}
+
+	mutex_lock(&pwm->lock);
+	pwm_get_state(dev, &cur_state);
+
+	enabled = cur_state.enabled;
+
+	if (state->period != pwm->approx_period) {
+		if (pwm->user_count != 1) {
+			ret = -EBUSY;
+			goto exit;
+		}
+		pwm->approx_period = state->period;
+		pwm_sifive_update_clock(pwm, clk_get_rate(pwm->clk));
+	}
+
+	duty_cycle = state->duty_cycle;
+	if (!state->enabled)
+		duty_cycle = 0;
+
+	num = (u64)duty_cycle * (1U << PWM_SIFIVE_CMPWIDTH);
+	frac = div_u64_round(num, state->period);
+	/* The hardware cannot generate a 100% duty cycle */
+	frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1);
+
+	writel(frac, pwm->regs + PWM_SIFIVE_PWMCMP0 +
+	       dev->hwpwm * PWM_SIFIVE_SIZE_PWMCMP);
+
+	if (state->enabled != enabled) {
+		ret = pwm_sifive_enable(chip, state->enabled);
+		if (ret)
+			goto exit;
+	}
+
+exit:
+	clk_disable(pwm->clk);
+	mutex_unlock(&pwm->lock);
+	return ret;
+}
+
+static const struct pwm_ops pwm_sifive_ops = {
+	.request = pwm_sifive_request,
+	.free = pwm_sifive_free,
+	.get_state = pwm_sifive_get_state,
+	.apply = pwm_sifive_apply,
+	.owner = THIS_MODULE,
+};
+
+static int pwm_sifive_clock_notifier(struct notifier_block *nb,
+				     unsigned long event, void *data)
+{
+	struct clk_notifier_data *ndata = data;
+	struct pwm_sifive_ddata *pwm =
+		container_of(nb, struct pwm_sifive_ddata, notifier);
+
+	if (event == POST_RATE_CHANGE)
+		pwm_sifive_update_clock(pwm, ndata->new_rate);
+
+	return NOTIFY_OK;
+}
+
+static int pwm_sifive_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pwm_sifive_ddata *pwm;
+	struct pwm_chip *chip;
+	struct resource *res;
+	int ret;
+
+	pwm = devm_kzalloc(dev, sizeof(*pwm), GFP_KERNEL);
+	if (!pwm)
+		return -ENOMEM;
+
+	mutex_init(&pwm->lock);
+	chip = &pwm->chip;
+	chip->dev = dev;
+	chip->ops = &pwm_sifive_ops;
+	chip->of_pwm_n_cells = 3;
+	chip->base = -1;
+	chip->npwm = 4;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwm->regs = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pwm->regs)) {
+		dev_err(dev, "Unable to map IO resources\n");
+		return PTR_ERR(pwm->regs);
+	}
+
+	pwm->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pwm->clk)) {
+		if (PTR_ERR(pwm->clk) != -EPROBE_DEFER)
+			dev_err(dev, "Unable to find controller clock\n");
+		return PTR_ERR(pwm->clk);
+	}
+
+	ret = clk_prepare_enable(pwm->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock for pwm: %d\n", ret);
+		return ret;
+	}
+
+	/* Watch for changes to underlying clock frequency */
+	pwm->notifier.notifier_call = pwm_sifive_clock_notifier;
+	ret = clk_notifier_register(pwm->clk, &pwm->notifier);
+	if (ret) {
+		dev_err(dev, "failed to register clock notifier: %d\n", ret);
+		goto disable_clk;
+	}
+
+	/* Initialize PWM */
+	pwm->approx_period = PWM_SIFIVE_DEFAULT_PERIOD;
+	pwm_sifive_update_clock(pwm, clk_get_rate(pwm->clk));
+
+	ret = pwmchip_add(chip);
+	if (ret < 0) {
+		dev_err(dev, "cannot register PWM: %d\n", ret);
+		goto unregister_clk;
+	}
+
+	platform_set_drvdata(pdev, pwm);
+	dev_dbg(dev, "SiFive PWM chip registered %d PWMs\n", chip->npwm);
+
+	return 0;
+
+unregister_clk:
+	clk_notifier_unregister(pwm->clk, &pwm->notifier);
+disable_clk:
+	clk_disable_unprepare(pwm->clk);
+
+	return ret;
+}
+
+static int pwm_sifive_remove(struct platform_device *dev)
+{
+	struct pwm_sifive_ddata *pwm = platform_get_drvdata(dev);
+	int ret, ch;
+	bool is_enabled = false;
+
+	ret = pwmchip_remove(&pwm->chip);
+	clk_notifier_unregister(pwm->clk, &pwm->notifier);
+
+	for (ch = 0; ch < pwm->chip.npwm; ch++) {
+		if (pwm_is_enabled(&pwm->chip.pwms[ch])) {
+			is_enabled = true;
+			break;
+		}
+	}
+	if (is_enabled)
+		clk_disable(pwm->clk);
+	clk_unprepare(pwm->clk);
+	return ret;
+}
+
+static const struct of_device_id pwm_sifive_of_match[] = {
+	{ .compatible = "sifive,pwm0" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pwm_sifive_of_match);
+
+static struct platform_driver pwm_sifive_driver = {
+	.probe = pwm_sifive_probe,
+	.remove = pwm_sifive_remove,
+	.driver = {
+		.name = "pwm-sifive",
+		.of_match_table = pwm_sifive_of_match,
+	},
+};
+module_platform_driver(pwm_sifive_driver);
+
+MODULE_DESCRIPTION("SiFive PWM driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1