Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Icenowy Zheng <icenowy@aosc.io>
To:     Rob Herring <robh+dt@kernel.org>,
        Maxime Ripard <maxime.ripard@bootlin.com>,
        Chen-Yu Tsai <wens@csie.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Jagan Teki <jagan@amarulasolutions.com>
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com,
        Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH 12/14] ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
Date:   Tue, 12 Mar 2019 23:22:54 +0800
Message-Id: <20190312152256.35574-13-icenowy@aosc.io>
In-Reply-To: <20190312152256.35574-1-icenowy@aosc.io>
References: <20190312152256.35574-1-icenowy@aosc.io>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The UART2 RX/TX pins on Allwinner V3 series is at PB0/1, which is used
as debugging UART on some boards.

Add pinctrl node for them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 arch/arm/boot/dts/sun8i-v3s.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index 21e1806ca509..10795b5ec376 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -304,6 +304,11 @@
 				function = "uart0";
 			};
 
+			uart2_pins: uart2-pins {
+				pins = "PB0", "PB1";
+				function = "uart2";
+			};
+
 			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2", "PF3",
 				       "PF4", "PF5";
@@ -377,6 +382,8 @@
 			reg-io-width = <4>;
 			clocks = <&ccu CLK_BUS_UART2>;
 			resets = <&ccu RST_BUS_UART2>;
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
 			status = "disabled";
 		};
 
-- 
2.18.1