Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263581AbUCUAtD (ORCPT ); Sat, 20 Mar 2004 19:49:03 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263583AbUCUAtD (ORCPT ); Sat, 20 Mar 2004 19:49:03 -0500 Received: from 62.79.102.158.adsl.arc.worldonline.dk ([62.79.102.158]:3857 "EHLO mail.bitplanet.net") by vger.kernel.org with ESMTP id S263581AbUCUArk (ORCPT ); Sat, 20 Mar 2004 19:47:40 -0500 Message-ID: <405CE626.3000301@bitplanet.net> Date: Sun, 21 Mar 2004 01:47:34 +0100 From: =?ISO-8859-1?Q?Kristian_H=F8gsberg?= User-Agent: Mozilla Thunderbird 0.5 (X11/20040208) X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: ACPI IRQ routing problems with Thinkpad T40 Content-Type: multipart/mixed; boundary="------------000008030504050809080904" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 61626 Lines: 1239 This is a multi-part message in MIME format. --------------000008030504050809080904 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Hi, I've been trying to track down a problem where an interrupt from a cardbus card is being routed incorrectly. I'm running 2.6.3 with ACPI enabled on an IBM Thinkpad T40 which has a TI1250 cardbus controller. The cardbus controller I'm using is a PCILynx IEEE1394 controller, but that doesn't seem to be the problem as I get the same behavior with a OHCI IEEE1394 controller. The problem is that when I use the second cardbus slot the device gets assigned IRQ 9, but it generates interrupts on IRQ 5. After a short while the kernel disables IRQ 5 as nobody is handling the interrupt. I've tried to print out dev->irq before calling pci_enable_device() and at this point it's 5, but after enabling it has been set to 9. I've attached the output of lspci -vv and dmesg. Before loading the driver for the cardbus device lspci reports IRQ 5, after loading the driver lspci reports IRQ 9. One thing that looks strange to me is that the cardbus device (07:00.0) has interrupt pin A, but the cardbus controller that it is attached to (02:00.1) has interrupt pin B. Or is it a problem with the cardbus controller not honoring the new IRQ that's assigned to it? I'm booting with pci=noacpi now, which fixes the problem, but I'm ready to help track this down, if somebody has a suggestion. I've also attached noacpi versions of lspci and dmesg outputs (after loading the driver). Kristian --------------000008030504050809080904 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Linux version 2.6.3 (krh@localhost.localdomain) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #2 SMP Wed Feb 25 21:48:42 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data) BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130912 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126816 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. ACPI: RSDP (v002 IBM ) @ 0x000f6b40 ACPI: XSDT (v001 IBM TP-1R 0x00002020 LTP 0x00000000) @ 0x1ff6c273 ACPI: FADT (v003 IBM TP-1R 0x00002020 IBM 0x00000001) @ 0x1ff6c300 ACPI: SSDT (v001 IBM TP-1R 0x00002020 MSFT 0x0100000e) @ 0x1ff6c4b4 ACPI: ECDT (v001 IBM TP-1R 0x00002020 IBM 0x00000001) @ 0x1ff77e16 ACPI: TCPA (v001 IBM TP-1R 0x00002020 PTL 0x00000001) @ 0x1ff77e68 ACPI: BOOT (v001 IBM TP-1R 0x00002020 LTP 0x00000001) @ 0x1ff77fd8 ACPI: DSDT (v001 IBM TP-1R 0x00002020 MSFT 0x0100000e) @ 0x00000000 Built 1 zonelists Kernel command line: ro root=/dev/hda2 rhgb Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1495.512 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 513384k/523648k available (2628k kernel code, 9496k reserved, 981k data, 192k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2957.31 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05 per-CPU timeslice cutoff: 2925.79 usecs. task migration cache decay timeout: 3 msecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1494.0939 MHz. ..... host bus clock speed is 99.0662 MHz. Starting migration thread for cpu 0 Brought up 0 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040116 ACPI: IRQ9 SCI: Level Trigger. ACPI: Found ECDT ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.USB7._INI] (Node dfef2560), AE_AML_REGION_LIMIT ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' radeonfb: Invalid ROM signature 0 should be 0xaa55 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=260.00 Mhz, System=183.00 MHz Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: 1024x768 radeonfb: detected LVDS panel size from BIOS: 1024x768 radeondb: BIOS provided dividers will be used radeonfb: Power Management enabled for Mobility chipsets radeonfb: ATI Radeon LW DDR SGRAM 32 MB SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. udf: registering filesystem ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THM0] (47 C) Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xd0000000 [drm] Initialized radeon 1.9.0 20020828 on minor 0 [drm] Initialized i830 1.3.2 20021108 on minor 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS05-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA745 DVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.00 loaded. Console: switching to colour frame buffer device 128x48 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 9, pci mem e1882000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 9, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 10, io base 00001840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC). PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49438 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 at 0xc0000c00, irq 5 oprofile: using NMI interrupt. pktgen.c: v1.3: Packet Generator for packet performance testing. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4091 buckets, 32728 max) - 304 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 192k freed agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. EXT3 FS on hda2, internal journal Adding 521632k swap on /dev/hda3. Priority:-1 extents:1 Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1 Copyright (c) 1999-2004 Intel Corporation. eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 100 Mbps Full Duplex agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. Linux Kernel Card Services options: [pci] [cardbus] [pm] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x0088, PCI irq 9 Socket status: 30000020 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x0088, PCI irq 5 Socket status: 30000020 --------------000008030504050809080904 Content-Type: text/plain; name="dmesg-noacpi" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-noacpi" 0: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data) BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130912 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126816 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. IBM machine detected. Enabling interrupts during APM calls. IBM machine detected. Disabling SMBus accesses. ACPI: RSDP (v002 IBM ) @ 0x000f6b40 ACPI: XSDT (v001 IBM TP-1R 0x00002020 LTP 0x00000000) @ 0x1ff6c273 ACPI: FADT (v003 IBM TP-1R 0x00002020 IBM 0x00000001) @ 0x1ff6c300 ACPI: SSDT (v001 IBM TP-1R 0x00002020 MSFT 0x0100000e) @ 0x1ff6c4b4 ACPI: ECDT (v001 IBM TP-1R 0x00002020 IBM 0x00000001) @ 0x1ff77e16 ACPI: TCPA (v001 IBM TP-1R 0x00002020 PTL 0x00000001) @ 0x1ff77e68 ACPI: BOOT (v001 IBM TP-1R 0x00002020 LTP 0x00000001) @ 0x1ff77fd8 ACPI: DSDT (v001 IBM TP-1R 0x00002020 MSFT 0x0100000e) @ 0x00000000 Built 1 zonelists Kernel command line: ro root=/dev/hda2 pci=noacpi 3 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1495.539 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 513384k/523648k available (2628k kernel code, 9496k reserved, 981k data, 192k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2957.31 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05 per-CPU timeslice cutoff: 2925.79 usecs. task migration cache decay timeout: 3 msecs. SMP motherboard not detected. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1494.0916 MHz. ..... host bus clock speed is 99.0660 MHz. Starting migration thread for cpu 0 Brought up 0 CPUs NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040116 ACPI: IRQ9 SCI: Level Trigger. ACPI: Found ECDT ACPI-1120: *** Error: Method execution failed [\_SB_.PCI0.USB7._INI] (Node dfef2560), AE_AML_REGION_LIMIT ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub PCI: Probing PCI hardware PCI: Discovered primary peer bus 09 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24cc] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 10 for device 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:02:02.0 PCI: Found IRQ 9 for device 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:00:1d.0 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Sharing IRQ 9 with 0000:02:01.0 radeonfb: Invalid ROM signature 0 should be 0xaa55 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=260.00 Mhz, System=183.00 MHz Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: 1024x768 radeonfb: detected LVDS panel size from BIOS: 1024x768 radeondb: BIOS provided dividers will be used radeonfb: Power Management enabled for Mobility chipsets radeonfb: ATI Radeon LW DDR SGRAM 32 MB SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. udf: registering filesystem ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3, 8 throttling states) ACPI: Thermal Zone [THM0] (47 C) Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xd0000000 [drm] Initialized radeon 1.9.0 20020828 on minor 0 [drm] Initialized i830 1.3.2 20021108 on minor 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A PCI: Found IRQ 5 for device 0000:00:1f.6 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:02:00.1 Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) PCI: Found IRQ 10 for device 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:02:02.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS05-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA745 DVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/7898KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.00 loaded. Console: switching to colour frame buffer device 128x48 PCI: Found IRQ 9 for device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 9, pci mem e1882000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 PCI: Found IRQ 9 for device 0000:00:1d.0 PCI: Sharing IRQ 9 with 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Sharing IRQ 9 with 0000:02:01.0 uhci_hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 9, io base 00001800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.1 uhci_hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 00001820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:02:02.0 uhci_hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 10, io base 00001840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Advanced Linux Sound Architecture Driver Version 1.0.2c (Thu Feb 05 15:41:49 2004 UTC). PCI: Found IRQ 5 for device 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.6 PCI: Sharing IRQ 5 with 0000:02:00.1 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49431 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 at 0xc0000c00, irq 5 oprofile: using NMI interrupt. pktgen.c: v1.3: Packet Generator for packet performance testing. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4091 buckets, 32728 max) - 304 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 192k freed EXT3 FS on hda2, internal journal Adding 521632k swap on /dev/hda3. Priority:-1 extents:1 Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1 Copyright (c) 1999-2004 Intel Corporation. PCI: Found IRQ 9 for device 0000:02:01.0 PCI: Sharing IRQ 9 with 0000:00:1d.0 PCI: Sharing IRQ 9 with 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection e1000: eth0 NIC Link is Up 100 Mbps Full Duplex Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Found IRQ 9 for device 0000:02:00.0 PCI: Sharing IRQ 9 with 0000:00:1d.0 PCI: Sharing IRQ 9 with 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:02:01.0 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x0088, PCI irq 9 Socket status: 30000006 PCI: Found IRQ 5 for device 0000:02:00.1 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:00:1f.6 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x0088, PCI irq 5 Socket status: 30000020 pin=0x01, dword=0xdfd9b680 dev=0000:07:00.0, old-pin=1, new-pin=1, parent=0000:02:00.1, parent_pin=2 nosy: probe of 0000:07:00.0 failed with error -6 Loaded nosy. Unloaded nosy. irq=5, dev=0000:07:00.0, old-pin=1, new-pin=1, parent=0000:02:00.1, parent_pin=2 nosy: probe of 0000:07:00.0 failed with error -6 Loaded nosy. agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode PCI: Found IRQ 9 for device 0000:01:00.0 PCI: Sharing IRQ 9 with 0000:00:1d.0 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Sharing IRQ 9 with 0000:02:01.0 atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. Unloaded nosy. PCI: Enabling device 0000:07:00.0 (0000 -> 0002) PCI: Setting latency timer of device 0000:07:00.0 to 64 Initialized PCILynx IEEE1394 card, irq=5 Loaded nosy. pin=0x01, dword=0xdfd9b780 ohci1394: $Rev: 1097 $ Ben Collins PCI: Enabling device 0000:03:00.0 (0000 -> 0002) ohci1394: fw-host0: Unexpected PCI resource length of 1000! ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[20800000-208007ff] Max Packet=[1024] ieee1394: Host added: ID:BUS[0-00:1023] GUID[003095241000e38e] ieee1394: Node added: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node removed: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... doh, someone wants to mess with state set ieee1394: ConfigROM quadlet transaction error for node 0-01:1023 ieee1394: ConfigROM quadlet transaction error for node 0-02:1023 ieee1394: The root node is not cycle master capable; selecting a new root node and resetting... doh, someone wants to mess with state set ieee1394: Node added: ID:BUS[0-01:1023] GUID[0009a74000009000] ieee1394: Node changed: 0-00:1023 -> 0-02:1023 ieee1394: Node changed: 0-02:1023 -> 0-00:1023 ieee1394: Node removed: ID:BUS[0-01:1023] GUID[0009a74000009000] ieee1394: Node added: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node removed: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node added: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node removed: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node added: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node removed: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node added: ID:BUS[0-02:1023] GUID[0009a74000009000] ieee1394: Node changed: 0-02:1023 -> 0-01:1023 ieee1394: Node changed: 0-01:1023 -> 0-02:1023 ieee1394: Node changed: 0-02:1023 -> 0-01:1023 ieee1394: Node changed: 0-01:1023 -> 0-02:1023 ieee1394: Node changed: 0-02:1023 -> 0-01:1023 --------------000008030504050809080904 Content-Type: text/plain; name="lspci-vv" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="lspci-vv" 00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 03) Subsystem: IBM: Unknown device 0529 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1860 [size=16] Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 01) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 01) (prog-if 00 [Generic]) Subsystem: IBM: Unknown device 0525 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA]) Subsystem: IBM: Unknown device 0530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: 02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:01.0 Ethernet controller: Intel Corp.: Unknown device 101e (rev 03) Subsystem: IBM: Unknown device 0549 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] Capabilities: 02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) Subsystem: Intel Corp.: Unknown device 2551 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 03:00.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 [OrangeLink] Host Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: NEC Corporation: Unknown device 0063 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 07:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller (rev 04) (prog-if 00 [Generic]) Subsystem: Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1860 [size=16] Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 01) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 01) (prog-if 00 [Generic]) Subsystem: IBM: Unknown device 0525 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA]) Subsystem: IBM: Unknown device 0530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: 02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:01.0 Ethernet controller: Intel Corp.: Unknown device 101e (rev 03) Subsystem: IBM: Unknown device 0549 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] Capabilities: 02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) Subsystem: Intel Corp.: Unknown device 2551 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 03:00.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 [OrangeLink] Host Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: NEC Corporation: Unknown device 0063 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 07:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller (rev 04) (prog-if 00 [Generic]) Subsystem: Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01) (prog-if 00 [UHCI]) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at 1860 [size=16] Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 SMBus: Intel Corp. 82801DB/DBM SMBus Controller (rev 01) Subsystem: IBM: Unknown device 052d Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem Controller (rev 01) (prog-if 00 [Generic]) Subsystem: IBM: Unknown device 0525 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] (prog-if 00 [VGA]) Subsystem: IBM: Unknown device 0530 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=128K] Capabilities: 02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01) Subsystem: IBM ThinkPad T30 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 02:01.0 Ethernet controller: Intel Corp.: Unknown device 101e (rev 03) Subsystem: IBM: Unknown device 0549 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] Capabilities: 02:02.0 Network controller: Intel Corp. PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04) Subsystem: Intel Corp.: Unknown device 2551 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 03:00.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 [OrangeLink] Host Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: NEC Corporation: Unknown device 0063 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 07:00.0 FireWire (IEEE 1394): Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller (rev 04) (prog-if 00 [Generic]) Subsystem: Texas Instruments PCILynx/PCILynx2 IEEE 1394 Link Layer Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-