Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
IronPort-SDR: PQLJDj5MGxZ56USq3DcyDPrsvknTMTvhpVAn8yLgpWnrvyOug4XmWStI5y9xQYyjERWDXj8Mxj
 5L8Llg4l1LMOx1xaaYo4t4s2MLWn0PDj4iLdjuKzek7iFTRAuDTbJ1omWpiU9emBXhbWEm29Lb
 Z4U0C3RzzJTc+LzQefMfcROSRxCaHSOmBWeg6lWozCUBOFIx/9N/t4vVNDtqiKa3FSLLaZSu0P
 KUJHtEKzqtjeo3QcYomDjoujxDhxNl08spdzOMQz0Z2jSRjqZA6Rv9nwmVTGxTFr5jtHT56+bh
 bTtVy3Zt8yJDAvhrLNdrjBc8
IronPort-SDR: 74e+9wDs7inGi9149LY/w680g5jI4wF9t01OZPlDKox8ntToAjyg0lLwP+CgtlDwo/xd7ozIvB
 VDVf78wUsXnqAi5UgIGpIOo8OgA8A3g0qKsOr6sEEvwsUzQS1ud/cjXMQCS6UtUu7Jar5iwls0
 AzNAIFh5Ao8RBdQizSxZXV9zEH7NXSADMKS3scQpdVD0gysWU+RKIVlH+41hsavh030ucrSvGB
 OF9zsOLcOrwKMPj1eX3StIpbQN5bM9EsTpfXhL6FqiUSoVh2uVcFscWXvM7mAbh2neuWJjYLa/
 tXE=
From:   Atish Patra <atish.patra@wdc.com>
To:     linux-kernel@vger.kernel.org
Cc:     Atish Patra <atish.patra@wdc.com>,
        Sudeep Holla <sudeep.holla@arm.com>,
        Albert Ou <aou@eecs.berkeley.edu>,
        Anup Patel <anup@brainfault.org>,
        Ard Biesheuvel <ard.biesheuvel@linaro.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        devicetree@vger.kernel.org,
        Dmitriy Cherkasov <dmitriy@oss-tech.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Ingo Molnar <mingo@kernel.org>,
        Jeremy Linton <jeremy.linton@arm.com>,
        linux-riscv@lists.infradead.org,
        Mark Rutland <mark.rutland@arm.com>,
        Morten Rasmussen <morten.rasmussen@arm.com>,
        Otto Sabart <ottosabart@seberm.com>,
        Palmer Dabbelt <palmer@sifive.com>,
        Paul Walmsley <paul.walmsley@sifive.com>,
        "Peter Zijlstra (Intel)" <peterz@infradead.org>,
        "Rafael J. Wysocki" <rafael@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Thomas Gleixner <tglx@linutronix.de>,
        Will Deacon <will.deacon@arm.com>
Subject: [RFT/RFC PATCH v2 1/4] dt-binding: cpu-topology: Move cpu-map to a common binding.
Date:   Tue, 19 Mar 2019 18:22:48 -0700
Message-Id: <20190320012251.2728-2-atish.patra@wdc.com>
In-Reply-To: <20190320012251.2728-1-atish.patra@wdc.com>
References: <20190320012251.2728-1-atish.patra@wdc.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

cpu-map binding can be used to described cpu topology for both
RISC-V & ARM. It makes more sense to move the binding to document
to a common place.

The relevant discussion can be found here.
https://lkml.org/lkml/2018/11/6/19

Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
---
 .../topology.txt => cpu/cpu-topology.txt}     | 82 +++++++++++++++----
 1 file changed, 66 insertions(+), 16 deletions(-)
 rename Documentation/devicetree/bindings/{arm/topology.txt => cpu/cpu-topology.txt} (86%)

diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/cpu/cpu-topology.txt
similarity index 86%
rename from Documentation/devicetree/bindings/arm/topology.txt
rename to Documentation/devicetree/bindings/cpu/cpu-topology.txt
index 3b8febb4..069addcc 100644
--- a/Documentation/devicetree/bindings/arm/topology.txt
+++ b/Documentation/devicetree/bindings/cpu/cpu-topology.txt
@@ -1,12 +1,12 @@
 ===========================================
-ARM topology binding description
+CPU topology binding description
 ===========================================
 
 ===========================================
 1 - Introduction
 ===========================================
 
-In an ARM system, the hierarchy of CPUs is defined through three entities that
+In a SMP system, the hierarchy of CPUs is defined through three entities that
 are used to describe the layout of physical CPUs in the system:
 
 - socket
@@ -14,9 +14,6 @@ are used to describe the layout of physical CPUs in the system:
 - core
 - thread
 
-The cpu nodes (bindings defined in [1]) represent the devices that
-correspond to physical CPUs and are to be mapped to the hierarchy levels.
-
 The bottom hierarchy level sits at core or thread level depending on whether
 symmetric multi-threading (SMT) is supported or not.
 
@@ -25,33 +22,31 @@ threads existing in the system and map to the hierarchy level "thread" above.
 In systems where SMT is not supported "cpu" nodes represent all cores present
 in the system and map to the hierarchy level "core" above.
 
-ARM topology bindings allow one to associate cpu nodes with hierarchical groups
+CPU topology bindings allow one to associate cpu nodes with hierarchical groups
 corresponding to the system hierarchy; syntactically they are defined as device
 tree nodes.
 
-The remainder of this document provides the topology bindings for ARM, based
-on the Devicetree Specification, available from:
+Currently, only ARM/RISC-V intend to use this cpu topology binding but it may be
+used for any other architecture as well.
 
-https://www.devicetree.org/specifications/
+The cpu nodes, as per bindings defined in [4], represent the devices that
+correspond to physical CPUs and are to be mapped to the hierarchy levels.
 
-If not stated otherwise, whenever a reference to a cpu node phandle is made its
-value must point to a cpu node compliant with the cpu node bindings as
-documented in [1].
 A topology description containing phandles to cpu nodes that are not compliant
-with bindings standardized in [1] is therefore considered invalid.
+with bindings standardized in [4] is therefore considered invalid.
 
 ===========================================
 2 - cpu-map node
 ===========================================
 
-The ARM CPU topology is defined within the cpu-map node, which is a direct
+The ARM/RISC-V CPU topology is defined within the cpu-map node, which is a direct
 child of the cpus node and provides a container where the actual topology
 nodes are listed.
 
 - cpu-map node
 
-	Usage: Optional - On ARM SMP systems provide CPUs topology to the OS.
-			  ARM uniprocessor systems do not require a topology
+	Usage: Optional - On SMP systems provide CPUs topology to the OS.
+			  Uniprocessor systems do not require a topology
 			  description and therefore should not define a
 			  cpu-map node.
 
@@ -494,8 +489,63 @@ cpus {
 	};
 };
 
+Example 3: HiFive Unleashed (RISC-V 64 bit, 4 core system)
+
+{
+	#address-cells = <2>;
+	#size-cells = <2>;
+	compatible = "sifive,fu540g", "sifive,fu500";
+	model = "sifive,hifive-unleashed-a00";
+
+	...
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU1>;
+				};
+				core1 {
+					cpu = <&CPU2>;
+				};
+				core2 {
+					cpu0 = <&CPU2>;
+				};
+				core3 {
+					cpu0 = <&CPU3>;
+				};
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x1>;
+		}
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x2>;
+		}
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x3>;
+		}
+		CPU4: cpu@4 {
+			device_type = "cpu";
+			compatible = "sifive,rocket0", "riscv";
+			reg = <0x4>;
+		}
+	}
+};
 ===============================================================================
 [1] ARM Linux kernel documentation
     Documentation/devicetree/bindings/arm/cpus.yaml
 [2] Devicetree NUMA binding description
     Documentation/devicetree/bindings/numa.txt
+[3] RISC-V Linux kernel documentation
+    Documentation/devicetree/bindings/riscv/cpus.txt
+[4] https://www.devicetree.org/specifications/
-- 
2.21.0