Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Wed, 27 Mar 2019 18:07:50 -0700
From:   "Life is hard, and then you die" <ronald@innovation.ch>
To:     Andrzej Hajda <a.hajda@samsung.com>
Cc:     Inki Dae <inki.dae@samsung.com>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Lukas Wunner <lukas@wunner.de>,
        dri-devel@lists.freedesktop.org, linux-input@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] drm/bridge: sil_sii8620: make remote control optional.
Message-ID: <20190328010750.GA28319@innovation.ch>
Mail-Followup-To: Andrzej Hajda <a.hajda@samsung.com>,
        Inki Dae <inki.dae@samsung.com>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>,
        Lukas Wunner <lukas@wunner.de>, dri-devel@lists.freedesktop.org,
        linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20190124072125.GA28127@innovation.ch>
 <CGME20190125013406epcas3p2971d09f6836084e51cbf5d326593a93e@epcas3p2.samsung.com>
 <20190125013355.GA6722@innovation.ch>
 <d7e8493b-a1fc-3f7d-c715-5f72f15f9320@samsung.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <d7e8493b-a1fc-3f7d-c715-5f72f15f9320@samsung.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk


On Mon, Jan 28, 2019 at 11:53:38AM +0100, Andrzej Hajda wrote:
> On 25.01.2019 02:33, Ronald Tschal?r wrote:
> > commit d6abe6df706c (drm/bridge: sil_sii8620: do not have a dependency
> > of RC_CORE) changed the driver to select both RC_CORE and INPUT.
> > However, this causes problems with other drivers, in particular an input
> > driver that depends on MFD_INTEL_LPSS_PCI (to be added in a separate
> > commit):
> >
> >   drivers/clk/Kconfig:9:error: recursive dependency detected!
> >   drivers/clk/Kconfig:9:        symbol COMMON_CLK is selected by MFD_INTEL_LPSS
> >   drivers/mfd/Kconfig:566:      symbol MFD_INTEL_LPSS is selected by MFD_INTEL_LPSS_PCI
> >   drivers/mfd/Kconfig:580:      symbol MFD_INTEL_LPSS_PCI is implied by KEYBOARD_APPLESPI
> >   drivers/input/keyboard/Kconfig:73:    symbol KEYBOARD_APPLESPI depends on INPUT
> >   drivers/input/Kconfig:8:      symbol INPUT is selected by DRM_SIL_SII8620
> >   drivers/gpu/drm/bridge/Kconfig:83:    symbol DRM_SIL_SII8620 depends on DRM_BRIDGE
> >   drivers/gpu/drm/bridge/Kconfig:1:     symbol DRM_BRIDGE is selected by DRM_PL111
> >   drivers/gpu/drm/pl111/Kconfig:1:      symbol DRM_PL111 depends on COMMON_CLK
> >
> > According to the docs and general consensus, select should only be used
> > for non user-visible symbols, but both RC_CORE and INPUT are
> > user-visible. Furthermore almost all other references to INPUT
> > throughout the kernel config are depends, not selects. For this reason
> > the first part of this change reverts commit d6abe6df706c.
> >
> > In order to address the original reason for commit d6abe6df706c, namely
> > that not all boards use the remote controller functionality and hence
> > should not need have to deal with RC_CORE, the second part of this
> > change now makes the remote control support in the driver optional and
> > contingent on RC_CORE being defined. And with this the hard dependency
> > on INPUT also goes away as that is only needed if RC_CORE is defined
> > (which in turn already depends on INPUT).
> 
> 
> Thanks for fixing it, this seems to be a best way to deal with it, more
> comments below.

Sorry I didn't respond to this earlier, but since I wasn't on the
to/cc list and I neglected to check the archives I completely missed
it.

> > CC: Inki Dae <inki.dae@samsung.com>
> > CC: Andrzej Hajda <a.hajda@samsung.com>
> > CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > CC: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > Signed-off-by: Ronald Tschal?r <ronald@innovation.ch>
> > ---
> > Resending this, as I somehow managed to forget to cc dri-devel.
> > Apologies for the duplication.
> >
> > Changes in v2:
> >  - completely remove dependencies on both RC_CORE and INPUT in Kconfig,
> >  - make remote control functionality in driver contingent on RC_CORE
> >    being defined
> >
> >  drivers/gpu/drm/bridge/Kconfig       |  2 --
> >  drivers/gpu/drm/bridge/sil-sii8620.c | 17 +++++++++++++++++
> >  2 files changed, 17 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> > index 2fee47b0d50b..a11198a36005 100644
> > --- a/drivers/gpu/drm/bridge/Kconfig
> > +++ b/drivers/gpu/drm/bridge/Kconfig
> > @@ -85,8 +85,6 @@ config DRM_SIL_SII8620
> >  	depends on OF
> >  	select DRM_KMS_HELPER
> >  	imply EXTCON
> > -	select INPUT
> > -	select RC_CORE
> 
> Shouldn't you put here "imply RC_CORE"? To avoid RC_CORE as module and
> sii8620 built-in.

Good point - fixed.

> >  	help
> >  	  Silicon Image SII8620 HDMI/MHL bridge chip driver.
> >  
> > diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c b/drivers/gpu/drm/bridge/sil-sii8620.c
> > index 0cc293a6ac24..dee47752791e 100644
> > --- a/drivers/gpu/drm/bridge/sil-sii8620.c
> > +++ b/drivers/gpu/drm/bridge/sil-sii8620.c
> > @@ -66,7 +66,9 @@ enum sii8620_mt_state {
> >  struct sii8620 {
> >  	struct drm_bridge bridge;
> >  	struct device *dev;
> > +#if IS_ENABLED(CONFIG_RC_CORE)
> >  	struct rc_dev *rc_dev;
> > +#endif
> >  	struct clk *clk_xtal;
> >  	struct gpio_desc *gpio_reset;
> >  	struct gpio_desc *gpio_int;
> > @@ -1756,6 +1758,7 @@ static void sii8620_send_features(struct sii8620 *ctx)
> >  	sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf));
> >  }
> >  
> > +#if IS_ENABLED(CONFIG_RC_CORE)
> >  static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
> >  {
> >  	bool pressed = !(scancode & MHL_RCP_KEY_RELEASED_MASK);
> > @@ -1774,6 +1777,12 @@ static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
> >  
> >  	return true;
> >  }
> > +#else
> > +static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
> > +{
> > +	return false;
> > +}
> > +#endif
> >  
> >  static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
> >  {
> > @@ -2097,6 +2106,7 @@ static void sii8620_cable_in(struct sii8620 *ctx)
> >  	enable_irq(to_i2c_client(ctx->dev)->irq);
> >  }
> >  
> > +#if IS_ENABLED(CONFIG_RC_CORE)
> >  static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
> >  {
> >  	struct rc_dev *rc_dev;
> > @@ -2126,6 +2136,11 @@ static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
> >  	}
> >  	ctx->rc_dev = rc_dev;
> >  }
> > +#else
> > +static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
> > +{
> > +}
> > +#endif
> >  
> >  static void sii8620_cable_out(struct sii8620 *ctx)
> >  {
> > @@ -2214,9 +2229,11 @@ static int sii8620_attach(struct drm_bridge *bridge)
> >  
> >  static void sii8620_detach(struct drm_bridge *bridge)
> >  {
> > +#if IS_ENABLED(CONFIG_RC_CORE)
> >  	struct sii8620 *ctx = bridge_to_sii8620(bridge);
> >  
> >  	rc_unregister_device(ctx->rc_dev);
> > +#endif
> >  }
> 
> In two cases you create stub functions, in the third you put ifdefs
> inside function, some lack of consistency.

Agreed - I'll make a stub for sii8620_detach() too.

> I wonder if it wouldn't be better to create stubs just for rc_core
> functions, the best would be to put stubs into rc-core.h, but if the
> case of 'optional rc-core' is too rare you can put stubs into the driver:
> 
> diff --git a/drivers/gpu/drm/bridge/sil-sii8620.c
> b/drivers/gpu/drm/bridge/sil-sii8620.c
> 
> index a6e8f4591e63..6ca838d30f93 100644
> --- a/drivers/gpu/drm/bridge/sil-sii8620.c
> +++ b/drivers/gpu/drm/bridge/sil-sii8620.c
> @@ -35,6 +35,13 @@
> ?
> ?#include "sil-sii8620.h"
> ?
> +#if !IS_ENABLED(CONFIG_RC_CORE)
> +#define rc_unregister_device(dev) ({ (void)(dev); })
> +#define rc_allocate_device(type) ({ NULL; })
> +#define rc_keydown(...) ({ })
> +#define rc_keyup(...) ({ })
> +#endif
> +
> ?#define SII8620_BURST_BUF_LEN 288
> ?#define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3)

The reason I didn't do this was because it leads to unwanted log
messages: in particular in sii8620_init_rcp_input_dev() the failed
allocation results in an ugly dev_err() message; in the case of
sii8620_rcp_consume() it's a much more benign dev_dbg() though.

But if stubs for rc-core is the preferred approach, I'll certainly
do that instead.

As to how rare 'optional rc-core' is, the only other place I've found
is in drivers/media/usb/dvb-usb-v2/, and there the approach is to #if
out the whole rc related code and stub out the single entry point to
it (get_rc_config). So for now it looks like use for rc-core stubs
would be restricted to this module (if we go that route).


  Cheers,

  Ronald