Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Brian Masney <masneyb@onstation.org>
To:     lee.jones@linaro.org, daniel.thompson@linaro.org,
        jingoohan1@gmail.com, robh+dt@kernel.org
Cc:     jacek.anaszewski@gmail.com, pavel@ucw.cz, mark.rutland@arm.com,
        b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org,
        linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
        dmurphy@ti.com, jonathan@marek.ca
Subject: [PATCH v2 1/3] backlight: lm3630a: return 0 on success in update_status functions
Date:   Mon,  1 Apr 2019 06:30:32 -0400
Message-Id: <20190401103034.21062-2-masneyb@onstation.org>
In-Reply-To: <20190401103034.21062-1-masneyb@onstation.org>
References: <20190401103034.21062-1-masneyb@onstation.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status()
both return the brightness value if the brightness was successfully
updated. Writing to these attributes via sysfs would cause a 'Bad
address' error to be returned. These functions should return 0 on
success, so let's change it to correct that error.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Fixes: 28e64a68a2ef ("backlight: lm3630: apply chip revision")
---
 drivers/video/backlight/lm3630a_bl.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index 2030a6b77a09..ef2553f452ca 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -201,7 +201,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
 				      LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access\n");
@@ -278,7 +278,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
 				      LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
 	if (ret < 0)
 		goto out_i2c_err;
-	return bl->props.brightness;
+	return 0;
 
 out_i2c_err:
 	dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
-- 
2.20.1