Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Douglas Anderson <dianders@chromium.org>
To:     Thierry Reding <thierry.reding@gmail.com>,
        Heiko Stuebner <heiko@sntech.de>,
        Sean Paul <seanpaul@chromium.org>
Cc:     linux-rockchip@lists.infradead.org,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        dri-devel@lists.freedesktop.org,
        Boris Brezillon <boris.brezillon@collabora.com>,
        Ezequiel Garcia <ezequiel@collabora.com>,
        =?UTF-8?q?Enric=20Balletb=C3=B2?= <enric.balletbo@collabora.com>,
        Rob Herring <robh+dt@kernel.org>, mka@chromium.org,
        Doug Anderson <dianders@chromium.org>,
        Eric Anholt <eric@anholt.net>,
        Jeffy Chen <jeffy.chen@rock-chips.com>,
        =?UTF-8?q?St=C3=A9phane=20Marchesin?= <marcheu@chromium.org>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        David Airlie <airlied@linux.ie>,
        Mark Rutland <mark.rutland@arm.com>,
        Daniel Vetter <daniel@ffwll.ch>
Subject: [PATCH v5 1/7] dt-bindings: Add panel-timing subnode to simple-panel
Date:   Mon,  1 Apr 2019 10:17:18 -0700
Message-Id: <20190401171724.215780-2-dianders@chromium.org>
In-Reply-To: <20190401171724.215780-1-dianders@chromium.org>
References: <20190401171724.215780-1-dianders@chromium.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Sean Paul <seanpaul@chromium.org>

This patch adds a new subnode to simple-panel allowing us to override
the typical timing expressed in the panel's display_timing.

Changes in v2:
 - Split out the binding into a new patch (Rob)
 - display-timings is a new section (Rob)
 - Use the full display-timings subnode instead of picking the timing
   out (Rob/Thierry)
Changes in v3:
 - Go back to using the timing subnode directly, but rename to
   panel-timing (Rob)
Changes in v4:
 - Simplify desc. for when override should be used (Thierry/Laurent)
 - Removed Rob H review since it's been a year and wording changed
Changes in v5:
 - Removed bit about OS may ignore (Rob/Ezequiel)

Cc: Doug Anderson <dianders@chromium.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 .../bindings/display/panel/simple-panel.txt   | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
index b2b872c710f2..93882268c0b9 100644
--- a/Documentation/devicetree/bindings/display/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/display/panel/simple-panel.txt
@@ -15,6 +15,16 @@ Optional properties:
   (hot plug detect) signal, but the signal isn't hooked up so we should
   hardcode the max delay from the panel spec when powering up the panel.
 
+panel-timing subnode
+--------------------
+
+This optional subnode is for devices which require a mode differing
+from the panel's "typical" display timing.
+
+Format information on the panel-timing subnode can be found in
+display-timing.txt.
+
+
 Example:
 
 	panel: panel {
@@ -25,4 +35,16 @@ Example:
 		enable-gpios = <&gpio 90 0>;
 
 		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <266604720>;
+			hactive = <2400>;
+			hfront-porch = <48>;
+			hback-porch = <84>;
+			hsync-len = <32>;
+			vactive = <1600>;
+			vfront-porch = <3>;
+			vback-porch = <120>;
+			vsync-len = <10>;
+		};
 	};
-- 
2.21.0.392.gf8f6787159e-goog