Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Pascal PAILLET-LME <p.paillet@st.com>
To:     "mcoquelin.stm32@gmail.com" <mcoquelin.stm32@gmail.com>,
        Alexandre TORGUE <alexandre.torgue@st.com>,
        "robh+dt@kernel.org" <robh+dt@kernel.org>,
        "mark.rutland@arm.com" <mark.rutland@arm.com>,
        "linux@armlinux.org.uk" <linux@armlinux.org.uk>,
        "horms+renesas@verge.net.au" <horms+renesas@verge.net.au>,
        "olof@lixom.net" <olof@lixom.net>, "arnd@arndb.de" <arnd@arndb.de>,
        "geert+renesas@glider.be" <geert+renesas@glider.be>,
        "biju.das@bp.renesas.com" <biju.das@bp.renesas.com>,
        Yannick FERTRE <yannick.fertre@st.com>,
        "m.szyprowski@samsung.com" <m.szyprowski@samsung.com>,
        "linus.walleij@linaro.org" <linus.walleij@linaro.org>,
        "linux-stm32@st-md-mailman.stormreply.com" 
        <linux-stm32@st-md-mailman.stormreply.com>,
        "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
CC:     Pascal PAILLET-LME <p.paillet@st.com>,
        "linux-stm32@st-md-mailman.stormreply.com" 
        <linux-stm32@st-md-mailman.stormreply.com>
Subject: [PATCH 2/3] ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1
 board
Thread-Topic: [PATCH 2/3] ARM: dts: stm32: add stpmic1 support on stm32mp157a
 dk1 board
Thread-Index: AQHU6iLcyF7ogDySbUK9YVKX0yU9LQ==
Date:   Wed, 3 Apr 2019 13:40:55 +0000
Message-ID: <1554298852-9955-3-git-send-email-p.paillet@st.com>
References: <1554298852-9955-1-git-send-email-p.paillet@st.com>
In-Reply-To: <1554298852-9955-1-git-send-email-p.paillet@st.com>
Accept-Language: en-US
Content-Language: en-US
x-ms-exchange-messagesentrepresentingtype: 1
x-ms-exchange-transport-fromentityheader: Hosted
x-originating-ip: [10.75.127.50]
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 8BIT
MIME-Version: 1.0
X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2019-04-03_08:,,
 signatures=0
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

This patch adds stpmic1 support on stm32mp157a dk1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.

Signed-off-by: Pascal Paillet <p.paillet@st.com>
---
 arch/arm/boot/dts/stm32mp157a-dk1.dts | 157 ++++++++++++++++++++++++++++++++--
 1 file changed, 149 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 1b1886d..b25b551 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -9,6 +9,7 @@
 #include "stm32mp157c.dtsi"
 #include "stm32mp157-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
 	model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -36,14 +37,6 @@
 			default-state = "off";
 		};
 	};
-
-	v3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "v3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
 };
 
 &ethernet0 {
@@ -65,6 +58,154 @@
 	};
 };
 
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			 bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			 };
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+			 };
+
+			 vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			 };
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			power-off-time-sec = <10>;
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
 &ipcc {
 	status = "okay";
 };
-- 
1.9.1