Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263885AbUC3Tmx (ORCPT ); Tue, 30 Mar 2004 14:42:53 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263874AbUC3Tmx (ORCPT ); Tue, 30 Mar 2004 14:42:53 -0500 Received: from pop.gmx.de ([213.165.64.20]:63130 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S263885AbUC3Tki (ORCPT ); Tue, 30 Mar 2004 14:40:38 -0500 X-Authenticated: #1045983 From: Helge Deller To: linux-kernel@vger.kernel.org Subject: Re: Linux 2.6.5-rc3 - ALI15X3, irq 15: nobody cared! / Disabling IRQ #15 Date: Tue, 30 Mar 2004 21:40:23 +0200 User-Agent: KMail/1.6.2 References: In-Reply-To: MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200403302140.23791.deller@gmx.de> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7488 Lines: 160 IBM R30 Laptop, ALI15X3 IDE onboard chip, internal IDE harddisk & CDROM gives irq 15: nobody cared! .... Disabling IRQ #15 Message repeats ~ 1/min. 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c3) (prog-if fa) Subsystem: IBM: Unknown device 050f Flags: bus master, medium devsel, latency 32, IRQ 15 I/O ports at 7050 [size=16] Capabilities: [60] Power Management version 2 Any ideas ? <4>Linux version 2.6.5-rc3 (root@halden) (gcc version 3.3.1 (SuSE Linux)) #2 Tue Mar 30 10:28:34 CEST 2004 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000000f7e0000 (usable) <4> BIOS-e820: 000000000f7e0000 - 000000000f7f0000 (reserved) <4> BIOS-e820: 000000000f7f0000 - 000000000f7f8000 (ACPI data) <4> BIOS-e820: 000000000f7f8000 - 000000000f800000 (ACPI NVS) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>247MB LOWMEM available. <4>On node 0 totalpages: 63456 <4> DMA zone: 4096 pages, LIFO batch:1 <4> Normal zone: 59360 pages, LIFO batch:14 <4> HighMem zone: 0 pages, LIFO batch:1 <6>DMI 2.3 present. <6>IBM machine detected. Enabling interrupts during APM calls. <6>IBM machine detected. Disabling SMBus accesses. <6>ACPI: RSDP (v000 IBM ) @ 0x000fe030 <6>ACPI: RSDT (v001 IBM TP-1C 0x00001320 IBM 0x00000000) @ 0x0f7f0000 <6>ACPI: FADT (v001 IBM TP-1C 0x00001320 IBM 0x00000000) @ 0x0f7f0054 <6>ACPI: BOOT (v001 IBM TP-1C 0x00001320 IBM 0x00000000) @ 0x0f7f002c <6>ACPI: DSDT (v001 IBM TP-1C 0x00001320 MSFT 0x0100000d) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0xf108 <4>Built 1 zonelists <4>Kernel command line: root=/dev/hda2 pmdisk=/dev/hda3 <4>Local APIC disabled by BIOS -- reenabling. <4>Could not enable APIC! <6>Initializing CPU#0 <4>PID hash table entries: 1024 (order 10: 8192 bytes) <4>Detected 697.812 MHz processor. <6>Using pmtmr for high-res timesource <4>Console: colour VGA+ 80x25 <6>Memory: 247704k/253824k available (1687k kernel code, 5388k reserved, 720k data, 168k init, 0k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay loop... 1384.44 BogoMIPS <6>Security Scaffold v1.0.0 initialized <6>Capability LSM initialized <6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) <4>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <7>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 <7>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 <6>CPU: L1 I cache: 16K, L1 D cache: 16K <6>CPU: L2 cache: 256K <7>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>CPU: Intel Pentium III (Coppermine) stepping 0a <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <6>NET: Registered protocol family 16 <6>PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 <6>PCI: Using configuration type 1 <6>mtrr: v2.0 (20020519) <6>ACPI: Subsystem revision 20040326 <4>ACPI: IRQ9 SCI: Edge Trigger. <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <4>ACPI: PCI Interrupt Link [PILA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [PILB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [PILC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [PILD] (IRQs 10 *11) <4>ACPI: PCI Interrupt Link [PILE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [PILF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [PILG] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [PILH] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [PILI] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>ACPI: Embedded Controller [EC0] (gpe 34) <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>PnPBIOS: Scanning system for PnP BIOS support... <6>PnPBIOS: Found PnP BIOS installation structure at 0xc00f6f40 <6>PnPBIOS: PnP BIOS version 1.0, entry 0xfa000:0x0, dseg 0xf0000 <3>PnPBIOS: dev_node_info: function not supported on this system <3>PnPBIOS: Unable to get node info. Aborting. <4>ACPI: PCI Interrupt Link [PILH] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [PILB] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [PILD] enabled at IRQ 11 <4>ACPI: PCI Interrupt Link [PILI] enabled at IRQ 10 <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>Simple Boot Flag at 0x41 set to 0x1 <6>Machine check exception polling timer started. <6>cpufreq: Intel(R) SpeedStep(TM) for this chipset not (yet) available. <6>ikconfig 0.7 with /proc/config* <6>Initializing Cryptographic API <6>Activating ISA DMA hang workarounds. <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12 <6>loop: loaded (max 8 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ALI15X3: IDE controller at PCI slot 0000:00:10.0 <6>ALI15X3: chipset revision 195 <6>ALI15X3: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0x7050-0x7057, BIOS settings: hda:DMA, hdb:pio <6> ide1: BM-DMA at 0x7058-0x705f, BIOS settings: hdc:DMA, hdd:pio <4>hda: HITACHI_DK23CA-30, ATA DISK drive <4>Using anticipatory io scheduler <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>hdc: MATSHITADVD-ROM SR-8176, ATAPI CD/DVD-ROM drive <3>irq 15: nobody cared! <4>Call Trace: <4> [] __report_bad_irq+0x24/0x90 <4> [] do_IRQ+0x177/0x1f0 <4> [] common_interrupt+0x18/0x20 <4> [] do_softirq+0x3d/0xa0 <4> [] do_IRQ+0x16a/0x1f0 <4> [] common_interrupt+0x18/0x20 <4> [] setup_irq+0x7e/0xe0 <4> [] ide_intr+0x0/0x260 <4> [] request_irq+0x8f/0xe0 <4> [] init_irq+0x1c2/0x5a0 <4> [] ide_intr+0x0/0x260 <4> [] vsprintf+0x27/0x30 <4> [] hwif_init+0x145/0x380 <4> [] probe_hwif_init+0x19/0x66 <4> [] ide_setup_pci_device+0x68/0x80 <4> [] alim15x3_init_one+0x4b/0x80 <4> [] ide_scan_pcidev+0x54/0x80 <4> [] ide_scan_pcibus+0x1e/0xb0 <4> [] ide_init+0x5a/0x70 <4> [] init+0x58/0x1d0 <4> [] init+0x0/0x1d0 <4> [] kernel_thread_helper+0x5/0x10 <4> <3>handlers: <3>[] (ide_intr+0x0/0x260) <0>Disabling IRQ #15 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: max request size: 128KiB <6>hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63, UDMA(33) <6> hda: hda1 hda2 hda3 hda4 < hda5 hda6 > <6>mice: PS/2 mouse device common for all mice - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/