Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To:     Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc:     Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
        Mauro Carvalho Chehab <mchehab@infradead.org>,
        linux-kernel@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
        Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>, linux-hwmon@vger.kernel.org
Subject: [PATCH 16/21] docs: hwmon: da9052, da9055: convert to ReST format
Date:   Wed, 10 Apr 2019 08:12:06 -0300
Message-Id: <3660e0fd53c06d8c1de2886bcb3476e46bf89667.1554893882.git.mchehab+samsung@kernel.org>
In-Reply-To: <cover.1554893881.git.mchehab+samsung@kernel.org>
References: <cover.1554893881.git.mchehab+samsung@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Convert da9052 and da9055 to ReST format, in order to allow
them to be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
 Documentation/hwmon/da9052 | 40 ++++++++++++++++++++++++++------------
 Documentation/hwmon/da9055 | 20 ++++++++++++++-----
 2 files changed, 43 insertions(+), 17 deletions(-)

diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052
index 5bc51346b689..556e2778b9e5 100644
--- a/Documentation/hwmon/da9052
+++ b/Documentation/hwmon/da9052
@@ -1,6 +1,12 @@
+Kernel driver da9052
+====================
+
 Supported chips:
+
   * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs
+
     Prefix: 'da9052'
+
     Datasheet: Datasheet is not publicly available.
 
 Authors: David Dajun Chen <dchen@diasemi.com>
@@ -15,17 +21,20 @@ different inputs. The track and hold circuit ensures stable input voltages at
 the input of the ADC during the conversion.
 
 The ADC is used to measure the following inputs:
-Channel 0: VDDOUT - measurement of the system voltage
-Channel 1: ICH - internal battery charger current measurement
-Channel 2: TBAT - output from the battery NTC
-Channel 3: VBAT - measurement of the battery voltage
-Channel 4: ADC_IN4 - high impedance input (0 - 2.5V)
-Channel 5: ADC_IN5 - high impedance input (0 - 2.5V)
-Channel 6: ADC_IN6 - high impedance input (0 - 2.5V)
-Channel 7: XY - TSI interface to measure the X and Y voltage of the touch
-	   screen resistive potentiometers
-Channel 8: Internal Tjunc. - sense (internal temp. sensor)
-Channel 9: VBBAT - measurement of the backup battery voltage
+
+========= ===================================================================
+Channel 0 VDDOUT - measurement of the system voltage
+Channel 1 ICH - internal battery charger current measurement
+Channel 2 TBAT - output from the battery NTC
+Channel 3 VBAT - measurement of the battery voltage
+Channel 4 ADC_IN4 - high impedance input (0 - 2.5V)
+Channel 5 ADC_IN5 - high impedance input (0 - 2.5V)
+Channel 6 ADC_IN6 - high impedance input (0 - 2.5V)
+Channel 7 XY - TSI interface to measure the X and Y voltage of the touch
+	  screen resistive potentiometers
+Channel 8 Internal Tjunc. - sense (internal temp. sensor)
+Channel 9 VBBAT - measurement of the backup battery voltage
+========= ===================================================================
 
 By using sysfs attributes we can measure the system voltage VDDOUT, the battery
 charging current ICH, battery temperature TBAT, battery junction temperature
@@ -37,12 +46,15 @@ Voltage Monitoring
 Voltages are sampled by a 10 bit ADC.
 
 The battery voltage is calculated as:
+
 	Milli volt = ((ADC value * 1000) / 512) + 2500
 
 The backup battery voltage is calculated as:
+
 	Milli volt = (ADC value * 2500) / 512;
 
 The voltages on ADC channels 4, 5 and 6 are calculated as:
+
 	Milli volt = (ADC value * 2500) / 1023
 
 Temperature Monitoring
@@ -52,10 +64,14 @@ Temperatures are sampled by a 10 bit ADC.  Junction and battery temperatures
 are monitored by the ADC channels.
 
 The junction temperature is calculated:
+
 	Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8
+
 The junction temperature attribute is supported by the driver.
 
 The battery temperature is calculated:
-	Degree Celsius = 1 / (t1 + 1/298)- 273
+
+	Degree Celsius = 1 / (t1 + 1/298) - 273
+
 where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
 Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively.
diff --git a/Documentation/hwmon/da9055 b/Documentation/hwmon/da9055
index 855c3f536e00..beae271a3312 100644
--- a/Documentation/hwmon/da9055
+++ b/Documentation/hwmon/da9055
@@ -1,6 +1,11 @@
+Kernel driver da9055
+====================
+
 Supported chips:
   * Dialog Semiconductors DA9055 PMIC
+
     Prefix: 'da9055'
+
     Datasheet: Datasheet is not publicly available.
 
 Authors: David Dajun Chen <dchen@diasemi.com>
@@ -15,11 +20,12 @@ different inputs. The track and hold circuit ensures stable input voltages at
 the input of the ADC during the conversion.
 
 The ADC is used to measure the following inputs:
-Channel 0: VDDOUT - measurement of the system voltage
-Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
-Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
-Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
-Channel 4: Internal Tjunc. - sense (internal temp. sensor)
+
+- Channel 0: VDDOUT - measurement of the system voltage
+- Channel 1: ADC_IN1 - high impedance input (0 - 2.5V)
+- Channel 2: ADC_IN2 - high impedance input (0 - 2.5V)
+- Channel 3: ADC_IN3 - high impedance input (0 - 2.5V)
+- Channel 4: Internal Tjunc. - sense (internal temp. sensor)
 
 By using sysfs attributes we can measure the system voltage VDDOUT,
 chip junction temperature and auxiliary channels voltages.
@@ -31,9 +37,11 @@ Voltages are sampled in a AUTO mode it can be manually sampled too and results
 are stored in a 10 bit ADC.
 
 The system voltage is calculated as:
+
 	Milli volt = ((ADC value * 1000) / 85) + 2500
 
 The voltages on ADC channels 1, 2 and 3 are calculated as:
+
 	Milli volt = (ADC value * 1000) / 102
 
 Temperature Monitoring
@@ -43,5 +51,7 @@ Temperatures are sampled by a 10 bit ADC.  Junction temperatures
 are monitored by the ADC channels.
 
 The junction temperature is calculated:
+
 	Degrees celsius = -0.4084 * (ADC_RES - T_OFFSET) + 307.6332
+
 The junction temperature attribute is supported by the driver.
-- 
2.20.1