Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263596AbUDFCfv (ORCPT ); Mon, 5 Apr 2004 22:35:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263601AbUDFCfv (ORCPT ); Mon, 5 Apr 2004 22:35:51 -0400 Received: from [202.28.93.1] ([202.28.93.1]:51718 "EHLO gear.kku.ac.th") by vger.kernel.org with ESMTP id S263596AbUDFCfN (ORCPT ); Mon, 5 Apr 2004 22:35:13 -0400 Date: Tue, 6 Apr 2004 09:35:10 +0700 From: Kitt Tientanopajai To: daniel.ritz@gmx.ch Cc: linux-kernel@vger.kernel.org Subject: Re: 2.6.5 yenta_socket irq 10: nobody cared! Message-Id: <20040406093510.33c937e3.kitt@gear.kku.ac.th> In-Reply-To: <200404060227.58325.daniel.ritz@gmx.ch> References: <200404060227.58325.daniel.ritz@gmx.ch> X-Mailer: Sylpheed version 0.9.10 (GTK+ 1.2.10; i386-redhat-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23914 Lines: 511 Hi, > this is a known problem with the acer travelmate 361. it reports IRQ 11 for > the O2Micro cardbus bridge when it is in reality IRQ 10. > > see: > http://www.naos.co.nz/hardware/laptop/acer-361evi/x94.html#AEN138 > and > http://sourceforge.net/tracker/index.php?func=detail&aid=533863&group_id=2405&atid=102405 Thanks for info. I'll try that. > please give a full dmesg and a lspci -vvvn. > are you using ACPI? My boot param is "acpi=on pci=noacpi", below is output from dmesg and lspci. kitt -- $ dmesg Linux version 2.6.5 (root@peorth.kitty.in.th) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #1 Mon Apr 5 06:06:17 ICT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f7e0000 (usable) BIOS-e820: 000000000f7e0000 - 000000000f7e8000 (ACPI data) BIOS-e820: 000000000f7e8000 - 000000000f800000 (ACPI NVS) BIOS-e820: 000000000f800000 - 0000000010000000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 247MB LOWMEM available. On node 0 totalpages: 63456 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 59360 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 Acer ) @ 0x000fe030 ACPI: RSDT (v001 Acer TM360 0x00000001 Acer 0x00000000) @ 0x0f7e0000 ACPI: FADT (v001 Acer TM360 0x00000001 Acer 0x00000000) @ 0x0f7e0054 ACPI: BOOT (v001 Acer TM360 0x00000001 Acer 0x00000000) @ 0x0f7e002c ACPI: DSDT (v001 Acer AN360 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0xf108 Built 1 zonelists Kernel command line: ro root=/dev/hda2 acpi=on pci=noacpi vga=791 rhgb Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 999.945 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Memory: 247580k/253824k available (1931k kernel code, 5508k reserved, 752k data, 144k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1982.46 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [PILA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [PILE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [PILG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [PILH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 29) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized PCI: Probing PCI hardware PCI: Using IRQ router PIIX/ICH [8086/248c] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmaskPCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 vesafb: framebuffer at 0x98000000, mapped to 0xd000e000, size 8000k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Simple Boot Flag at 0x6e set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.13 udf: registering filesystem ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Processor [CPU0] (supports C1 C2 C3) ACPI: Thermal Zone [THR1] (39 C) ACPI: Thermal Zone [THR2] (33 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Console: switching to colour frame buffer device 128x48 lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 830M Chipset. agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0x98000000 mtrr: 0x98000000,0x8000000 overlaps existing 0x98000000,0x400000 [drm] Initialized i830 1.3.2 20021108 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PCI: Found IRQ 10 for device 0000:00:1f.6 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Sharing IRQ 10 with 0000:00:1f.5 Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 PCI: Found IRQ 11 for device 0000:00:1f.1 PCI: Sharing IRQ 11 with 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 ICH3M: chipset revision 1 ICH3M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa890-0xa897, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa898-0xa89f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK4025GAS, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: DV-28E-B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdc: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 4.6 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S4bios S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 144k freed mtrr: base(0x98000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 11 for device 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:1f.1 mtrr: 0x98000000,0x8000000 overlaps existing 0x98000000,0x400000 atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 11 for device 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:00:1f.1 uhci_hcd 0000:00:1d.0: Intel Corp. 82801CA/CAM USB (Hub #1) PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 0000a4a0 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.1 PCI: Sharing IRQ 11 with 0000:01:09.0 PCI: Sharing IRQ 11 with 0000:01:09.1 uhci_hcd 0000:00:1d.1: Intel Corp. 82801CA/CAM USB (Hub #2) PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 0000a4e0 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.2 uhci_hcd 0000:00:1d.2: Intel Corp. 82801CA/CAM USB (Hub #3) PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 0000a800 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver usb 1-1: new low speed USB device using address 2 input: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1d.0-1 EXT3 FS on hda2, internal journal Adding 506036k swap on /dev/hda3. Priority:-1 extents:1 PCI: Found IRQ 10 for device 0000:00:1f.5 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Sharing IRQ 10 with 0000:00:1f.6 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50448 usecs intel8x0: clocking to 48000 kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 1172 $ Ben Collins PCI: Found IRQ 10 for device 0000:01:03.0 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[80100000-801007ff] Max Packet=[2048] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0120900300000000] microcode: error! Bad data in microcode data file microcode: Error in the microcode data e100: Intel(R) PRO/100 Network Driver, 3.0.17 e100: Copyright(c) 1999-2004 Intel Corporation PCI: Found IRQ 10 for device 0000:01:08.0 PCI: Sharing IRQ 10 with 0000:01:05.0 e100: eth0: e100_probe: addr 0x80101000, irq 10, MAC addr 00:00:E2:61:54:AE mtrr: base(0x98000000) is not aligned on a size(0x180000) boundary PCI: Found IRQ 11 for device 0000:00:02.0 PCI: Sharing IRQ 11 with 0000:00:1d.0 PCI: Sharing IRQ 11 with 0000:00:1f.1 mtrr: 0x98000000,0x8000000 overlaps existing 0x98000000,0x400000 atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. cdrom: This disc doesn't have any tracks I recognize! Synaptics driver lost sync at byte 4 Synaptics driver resynced. Synaptics driver lost sync at byte 1 Synaptics driver lost sync at byte 1 Synaptics driver lost sync at byte 1 Synaptics driver resynced. ip_tables: (C) 2000-2002 Netfilter core team e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex PCI: Found IRQ 10 for device 0000:00:1f.6 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Sharing IRQ 10 with 0000:00:1f.5 PCI: Setting latency timer of device 0000:00:1f.6 to 64 spurious 8259A interrupt: IRQ7. cdrom: This disc doesn't have any tracks I recognize! Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Enabling device 0000:01:05.0 (0000 -> 0002) PCI: Found IRQ 10 for device 0000:01:05.0 PCI: Sharing IRQ 10 with 0000:01:08.0 Yenta: CardBus bridge found at 0000:01:05.0 [12a3:ab01] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ mask 0x0000, PCI irq 10 Socket status: 30000011 PCI: Found IRQ 11 for device 0000:01:09.0 PCI: Sharing IRQ 11 with 0000:00:1d.1 PCI: Sharing IRQ 11 with 0000:01:09.1 Yenta: CardBus bridge found at 0000:01:09.0 [1025:1022] irq 10: nobody cared! Call Trace: [] __report_bad_irq+0x2a/0x90 [] note_interrupt+0x70/0xb0 [] do_IRQ+0x120/0x130 [] common_interrupt+0x18/0x20 [] do_softirq+0x3e/0xa0 [] do_IRQ+0xfa/0x130 [] common_interrupt+0x18/0x20 [] delay_pmtmr+0x14/0x20 [] __delay+0x12/0x20 [] yenta_probe_irq+0xfe/0x140 [yenta_socket] [] yenta_get_socket_capabilities+0x3a/0x70 [yenta_socket] [] yenta_probe+0x1a7/0x240 [yenta_socket] [] pci_device_probe_static+0x52/0x70 [] __pci_device_probe+0x3c/0x50 [] pci_device_probe+0x2c/0x50 [] bus_match+0x3f/0x70 [] driver_attach+0x5c/0xa0 [] bus_add_driver+0xa8/0xc0 [] driver_register+0x2f/0x40 [] pci_register_driver+0x5c/0x90 [] yenta_socket_init+0xf/0x11 [yenta_socket] [] sys_init_module+0x142/0x280 [] sysenter_past_esp+0x52/0x71 handlers: [] (snd_intel8x0_interrupt+0x0/0x240 [snd_intel8x0]) [] (ohci_irq_handler+0x0/0x860 [ohci1394]) [] (e100_intr+0x0/0x5a0 [e100]) [] (snd_intel8x0_interrupt+0x0/0x230 [snd_intel8x0m]) [] (yenta_interrupt+0x0/0x40 [yenta_socket]) Disabling IRQ #10 Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000006 PCI: Found IRQ 11 for device 0000:01:09.1 PCI: Sharing IRQ 11 with 0000:00:1d.1 PCI: Sharing IRQ 11 with 0000:01:09.0 Yenta: CardBus bridge found at 0000:01:09.1 [1025:1022] Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000410 $ lspci -vvvn 00:00.0 Class 0600: 8086:3575 (rev 03) Subsystem: 1025:1022 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- (32-bit, prefetchable) Capabilities: 00:02.0 Class 0300: 8086:3577 (rev 03) Subsystem: 1025:1022 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:02.1 Class 0380: 8086:3577 Subsystem: 1025:1022 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:1d.0 Class 0c03: 8086:2482 (rev 01) Subsystem: 1025:1022 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00:1f.0 Class 0601: 8086:248c (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at a890 [size=16] Region 5: Memory at 10000000 (32-bit, non-prefetchable) [size=1K] 00:1f.3 Class 0c05: 8086:2483 (rev 01) Subsystem: 1025:1022 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 01:05.0 Class 0607: 104c:ac50 (rev 01) Subsystem: 12a3:ab01 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 01:08.0 Class 0200: 8086:1031 (rev 41) Subsystem: 1025:1022 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 01:09.0 Class 0607: 1217:6933 (rev 02) Subsystem: 1025:1022 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 01:09.1 Class 0607: 1217:6933 (rev 02) Subsystem: 1025:1022 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/