Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263654AbUDSPIk (ORCPT ); Mon, 19 Apr 2004 11:08:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261378AbUDSPIk (ORCPT ); Mon, 19 Apr 2004 11:08:40 -0400 Received: from eik.ii.uib.no ([129.177.16.3]:6032 "EHLO eik.ii.uib.no") by vger.kernel.org with ESMTP id S263654AbUDSPHa (ORCPT ); Mon, 19 Apr 2004 11:07:30 -0400 Date: Mon, 19 Apr 2004 17:07:27 +0200 From: Jan-Frode Myklebust To: "Moore, Eric Dean" Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org Subject: Re: LSI Logic FC HBA / mptscsih hang Message-ID: <20040419150727.GA25544@ii.uib.no> Mail-Followup-To: "Moore, Eric Dean" , linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org References: <0E3FA95632D6D047BA649F95DAB60E570442C522@exa-atlanta.se.lsil.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="9amGYk9869ThD9tj" Content-Disposition: inline In-Reply-To: <0E3FA95632D6D047BA649F95DAB60E570442C522@exa-atlanta.se.lsil.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19080 Lines: 459 --9amGYk9869ThD9tj Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Mon, Apr 19, 2004 at 10:53:47AM -0400, Moore, Eric Dean wrote: > Can you send me full dmesg boot log for the failing > system. Attached (both working single-cpu boot, and hanging dual-cpu boot). > Also is the same cables and drives being used > between this system and the other one that is failing? It doesn't need any cabling to fail.. It fails both with and without cables attached. > Is the Dell PowerEdge having onboard mpt scsi chip? No, I moved the adapter from the x330 to the Dell PowerEdge. Didn't connect the cabling/storage when I booted this system. -jf --9amGYk9869ThD9tj Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg Linux version 2.4.21-9.0.1.EL (buildsys@builder) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #1 Thu Feb 19 20:23:14 CST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffec340 (usable) BIOS-e820: 000000007ffec340 - 000000007fff0000 (ACPI data) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 524268 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294892 pages. IBM machine detected. Enabling interrupts during APM calls. Kernel command line: ro root=LABEL=/ console=tty0 console=ttyS1,9600 Initializing CPU#0 Detected 1261.372 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2516.58 BogoMIPS Memory: 2059956k/2097072k available (1526k kernel code, 32496k reserved, 1089k data, 164k init, 1179568k highmem) zapping low mappings. Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX Process timing init...done. mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Discovered peer bus 01 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Total HugeTLB memory allocated, 0 Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 131067 aio_setup: sizeof(struct page) = 56 Hugetlbfs mounted. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS1 at 0x02f8 (irq = 3) is a 16550A ttyS3 at 0x02e8 (irq = 0) is a 16550A Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA hda: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) Linux IP multicast router 0.06 plus PIM-SM Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 344k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Starting timer : 0 0 blk: queue f7fd9e14, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: IBM-ESXS Model: ST318452LC !# Rev: B841 Type: Direct-Access ANSI SCSI revision: 03 Starting timer : 0 0 blk: queue f7fd9c14, I/O limit 4095Mb (mask 0xffffffff) Vendor: IBM Model: FTlV1 S2 Rev: 0 Type: Processor ANSI SCSI revision: 02 Starting timer : 0 0 blk: queue f7fd9014, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB) Partition check: sda: sda1 sda2 sda3 Fusion MPT base driver 2.05.05+ Copyright (c) 1999-2002 LSI Logic Corporation PCI: Enabling device 01:05.0 (0000 -> 0003) mptbase: Initiating ioc0 bringup ioc0: FC919X: Capabilities={Initiator,Target,LAN} mptbase: 1 MPT adapter found, 1 installed. Fusion MPT SCSI Host driver 2.05.05+ scsi1 : ioc0: LSIFC919X, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11 Starting timer : 0 0 blk: queue f7498814, I/O limit 4294967295Mb (mask 0xffffffffffffffff) Vendor: IFT Model: ES A16F-G Rev: 331P Type: Direct-Access ANSI SCSI revision: 03 Starting timer : 0 0 blk: queue f7498a14, I/O limit 4294967295Mb (mask 0xffffffffffffffff) mptscsih: ioc0: scsi1: Id=0 Lun=0: Queue depth=31 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 SCSI device sdb: 3415035904 512-byte hdwr sectors (1748498 MB) sdb: sdb1 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 164k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xf88c5000, IRQ 7 usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal Adding Swap: 2040244k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. IA-32 Microcode Update Driver: v1.11 microcode: CPU0 already at revision 28 (current=28) microcode: freed 2048 bytes Attached scsi generic sg1 at scsi0, channel 0, id 8, lun 0, type 3 inserting floppy driver for 2.4.21-9.0.1.EL Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation divert: allocating divert_blk for eth0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled divert: allocating divert_blk for eth1 e100: selftest OK. e100: eth1: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled Intel(R) PRO/1000 Network Driver - version 5.2.20-k1 Copyright (c) 1999-2003 Intel Corporation. divert: allocating divert_blk for eth2 eth2: Intel(R) PRO/1000 Network Connection divert: freeing divert_blk for eth0 divert: freeing divert_blk for eth1 divert: freeing divert_blk for eth2 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation divert: allocating divert_blk for eth0 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled divert: allocating divert_blk for eth1 e100: selftest OK. e100: eth1: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled cpu cycle saver enabled e100: eth0 NIC Link is Up 100 Mbps Full duplex Intel(R) PRO/1000 Network Driver - version 5.2.20-k1 Copyright (c) 1999-2003 Intel Corporation. divert: allocating divert_blk for eth2 eth2: Intel(R) PRO/1000 Network Connection e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex lp: driver loaded but no devices found ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack --9amGYk9869ThD9tj Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.dualcpuhang" Linux version 2.4.21-9.0.1.ELsmp (buildsys@builder) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #1 SMP Thu Feb 19 19:57:33 CST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffec340 (usable) BIOS-e820: 000000007ffec340 - 000000007fff0000 (ACPI data) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 0009e1d0 hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. On node 0 totalpages: 524268 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294892 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: IBM ENSW Product ID: NF 4100R SMP APIC at: 0xFEE00000 Processor #3 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #14 Version 17 at 0xFEC00000. I/O APIC #13 Version 17 at 0xFEC01000. Processors: 2 xAPIC support is not present Enabling APIC mode: Flat. Using 2 I/O APICs IBM machine detected. Enabling interrupts during APM calls. Kernel command line: ro root=LABEL=/ console=tty0 console=ttyS1,9600 Initializing CPU#0 Detected 1261.373 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2516.58 BogoMIPS Memory: 2056784k/2097072k available (1685k kernel code, 35668k reserved, 1317k data, 224k init, 1179568k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#0. CPU0: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01 per-CPU timeslice cutoff: 1462.32 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 2516.58 BogoMIPS CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Pentium(R) III CPU family 1266MHz stepping 01 Total of 2 processors activated (5033.16 BogoMIPS). apic 0 pin 9 is an SMI pin! apic 0 pin 10 is an SMI pin! apic 1 pin 5 is an SMI pin! ENABLING IO-APIC IRQs Setting 14 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 14 ... ok. Setting 13 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 13 ... ok. ..TIMER: vector=0x31 pin1=-1 pin2=-1 ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1261.3513 MHz. ..... host bus clock speed is 132.7737 MHz. cpu: 0, clocks: 1327737, slice: 442579 CPU0 cpu: 1, clocks: 1327737, slice: 442579 CPU1 zapping low mappings. Process timing init...done. Starting migration thread for cpu 0 Starting migration thread for cpu 1 PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Discovered peer bus 01 PCI->APIC IRQ transform: (B0,I2,P0) -> 27 PCI->APIC IRQ transform: (B0,I10,P0) -> 25 PCI->APIC IRQ transform: (B0,I15,P0) -> 7 PCI->APIC IRQ transform: (B1,I3,P0) -> 28 PCI->APIC IRQ transform: (B1,I6,P0) -> 18 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Total HugeTLB memory allocated, 0 Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 131067 aio_setup: sizeof(struct page) = 60 Hugetlbfs mounted. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS1 at 0x02f8 (irq = 3) is a 16550A ttyS3 at 0x02e8 (irq = 0) is a 16550A Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA hda: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) Linux IP multicast router 0.06 plus PIM-SM Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 352k freed VFS: Mounted root (ext2 filesystem). Red Hat nash verSCSI subsystem driver Revision: 1.00 sion 3.5.13 starting Loading scsi_mod.o module Loading sd_mod.o module Loading aic7xxx.o module scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs Starting timer : 0 0 blk: queue f7fd3e18, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) Vendor: IBM-ESXS Model: ST318452LC !# Rev: B841 Type: Direct-Access ANSI SCSI revision: 03 Starting timer : 0 0 blk: queue f7fd3c18, I/O limit 4095Mb (mask 0xffffffff) Vendor: IBM Model: FTlV1 S2 Rev: 0 Type: Processor ANSI SCSI revision: 02 Starting timer : 0 0 blk: queue f7fd4018, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB) Partition check: sda: sda1 sda2 sda3 Loading mptbase.Fusion MPT base driver 2.05.05+ o module Copyright (c) 1999-2002 LSI Logic Corporation PCI: Enabling device 01:05.0 (0000 -> 0003) mptbase: Initiating ioc0 bringup ioc0: FC919X: Capabilities={Initiator,Target,LAN} mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: Initiating ioc0 recovery mptbase: 1 MPT adapter found, 1 installed. Loading mptscsihFusion MPT SCSI Host driver 2.05.05+ .o module scsi1 : ioc0: LSIFC919X, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11 Starting timer : 0 0 blk: queue f752d618, I/O limit 4294967295Mb (mask 0xffffffffffffffff) scsi : aborting command due to timeout : pid 25, scsi1, channel 0, id 0, lun 0 Inquiry 00 00 00 ff 00 mptscsih: OldAbort scheduling ABORT SCSI IO (sc=f752d400) IOs outstanding = 1 mptscsih: Attempting ABORT SCSI IO! (mf=f74e0100:sc=f752d400) SCSI host 1 abort (pid 25) timed out - resetting SCSI bus is being reset for host 1 channel 0. mptscsih: OldReset scheduling BUS_RESET (sc=f752d400) IOs outstanding = 1 SCSI host 1 channel 0 reset (pid 25) timed out - trying harder SCSI bus is being reset for host 1 channel 0. mptscsih: OldReset scheduling BUS_RESET (sc=f752d400) IOs outstanding = 1 SCSI host 1 reset (pid 25) timed out again - probably an unrecoverable SCSI bus or device hang. mptbase: Initiating ioc0 recovery SCSI host 1 reset (pid 26) timed out again - probably an unrecoverable SCSI bus or device hang. --9amGYk9869ThD9tj-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/