Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263551AbUDURZt (ORCPT ); Wed, 21 Apr 2004 13:25:49 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263557AbUDURZt (ORCPT ); Wed, 21 Apr 2004 13:25:49 -0400 Received: from p15112047.pureserver.info ([217.160.169.118]:22921 "EHLO mail.wim-media.de") by vger.kernel.org with ESMTP id S263551AbUDURYX (ORCPT ); Wed, 21 Apr 2004 13:24:23 -0400 From: Roessner Christian Organization: Roessner Network Solutions To: linux-kernel@vger.kernel.org Subject: APIC probs with kernel 2.6.6-rc1-bk2 and usb, bttv Date: Wed, 21 Apr 2004 19:26:05 +0200 User-Agent: KMail/1.6.2 MIME-Version: 1.0 Content-Disposition: inline Content-Type: Multipart/Mixed; boundary="Boundary-00=_t6qhAV4auQXAfr6" Message-Id: <200404211926.05479.info@roessner-net.com> X-Sagator-Scanner: clamd() Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 54437 Lines: 1178 --Boundary-00=_t6qhAV4auQXAfr6 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hello, I have searched inside the archives for posted problems with apic and usb or apic and bttv. Maybe the following was posted once before, but I could not find good answers. When I boot my machine using apic, usb is broken (plugging in the mouse or something else does not seem to do anything). I guess someone told about this bug earlier. The second thing is: I tried to use my MIRO PCTV with apic enabled. When starting an application such as tvtime or xawtv, the current channel appears and everything seems to be ok until I wait some moments or trying to change the channel. In this moment, the machine freezes. I found this bug first, when using the 2.4.x kernels, but this has not changed in 2.6.x, as I recognized. I hope, someone is reading this and may send me some patches, if he/she likes me to test it. Regards Christian N.B.: Logs are attached in a single file. --Boundary-00=_t6qhAV4auQXAfr6 Content-Type: text/plain; charset="us-ascii"; name="logfile.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="logfile.txt" dmesg (right after booting): errupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs *16) ACPI: PCI Interrupt Link [APC2] (IRQs *17) ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APC5] (IRQs *16) ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCS] (IRQs *23) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) SCSI subsystem initialized ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:1) 00:00:01[A] -> 2-23 -> IRQ 23 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1 Active:0) 00:00:02[A] -> 2-20 -> IRQ 20 ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:0) 00:00:02[B] -> 2-22 -> IRQ 22 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:0) 00:00:02[C] -> 2-21 -> IRQ 21 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt Link [APCK] enabled at IRQ 21 ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 20 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:1) 00:01:06[A] -> 2-18 -> IRQ 18 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:1) 00:01:06[B] -> 2-19 -> IRQ 19 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd9 -> IRQ 16 Mode:1 Active:1) 00:01:06[C] -> 2-16 -> IRQ 16 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xe1 -> IRQ 17 Mode:1 Active:1) 00:01:06[D] -> 2-17 -> IRQ 17 ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 1 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 D9 11 001 01 1 1 0 1 0 1 1 E1 12 001 01 1 1 0 1 0 1 1 C9 13 001 01 1 1 0 1 0 1 1 D1 14 001 01 1 1 0 0 0 1 1 B1 15 001 01 1 1 0 0 0 1 1 C1 16 001 01 1 1 0 0 0 1 1 B9 17 001 01 1 1 0 1 0 1 1 A9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xe0000000 PCI-DMA: Disabling IOMMU. vesafb: framebuffer at 0xe8000000, mapped to 0xffffff000004e000, size 16384k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ ikconfig 0.7 with /proc/config* devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 21830 bytes, found (1024x768, 16923 bytes, v3). Console: switching to colour frame buffer device 122x40 Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3: IDE controller at PCI slot 0000:00:08.0 NFORCE3: chipset revision 165 NFORCE3: not 100% native mode: will probe irqs later NFORCE3: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3: 0000:00:08.0 (rev a5) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6E040L0, ATA DISK drive hdb: MAXTOR 6L040J2, ATA DISK drive Uhhuh. NMI received for unknown reason 2d. Dazed and confused, but trying to continue Do you have a strange power saving mode enabled? ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 250 ATAPI Floppy, ATAPI FLOPPY drive hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdd: set_drive_speed_status: error=0x04 ide1: Drive 1 didn't accept speed setting. Oh, well. ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) /dev/ide/host0/bus0/target0/lun0: p1 hdb: max request size: 128KiB hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133) /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 ide-floppy driver 0.99.newide hdd: No disk in drive hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 oprofile: using NMI interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) RAMDISK: Couldn't find valid RAM disk image starting at 0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 148k freed Adding 1028152k swap on /dev/hdb2. Priority:-1 extents:1 EXT3 FS on hdb3, internal journal 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xffffff0001051000, 00:e0:4c:39:30:fb, IRQ 18 eth0: Identified 8139 chip type 'RTL-8139C' r8169 Gigabit Ethernet driver 1.2 loaded eth1: Identified chip type is 'RTL8169s/8110s'. eth1: RTL8169 at 0xffffff0001053000, 00:0d:61:51:4a:fe, IRQ 19 eth1: Auto-negotiation Enabled. eth1: 100Mbps Full-duplex operation. nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-5332 Fri Jan 9 12:42:32 PST 2004 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: JLMS Model: XJ-HD165H Rev: CH0Z Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 49525 usecs intel8x0: clocking to 47386 Linux video capture interface: v1.00 bttv: driver version 0.9.14 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt848 (rev 18) at 0000:01:08.0, irq: 16, latency: 32, mmio: 0xf0000000 bttv0: using: MIRO PCTV [card=1,insmod option] bttv0: gpio: en=00000000, out=00000000 in=00ff07ff [init] bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: miro: id=1 tuner=0 radio=no stereo=no bttv0: using tuner=0 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z tuner: chip found at addr 0xc0 i2c-bus bt848 #0 [sw] tuner: type set to 0 (Temic PAL (4002 FH5)) by bt848 #0 [sw] bttv0: registered device video0 bttv0: registered device vbi0 kjournald starting. Commit interval 5 seconds EXT3 FS on hdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 80 td 96 ohci_hcd 0000:00:02.0: nVidia Corporation nForce3 USB 1.1 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 20, pci mem ffffff00010e7000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd 0000:00:02.1: nVidia Corporation nForce3 USB 1.1 (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 22, pci mem ffffff00010e9000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 USB 2.0 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 21, pci mem ffffff00010eb000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs usb 2-1: new low speed USB device using address 2 Disabled Privacy Extensions on device ffffffff80433320(lo) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). usb 2-1: control timeout on ep0out ohci_hcd 0000:00:02.1: Unlink after no-IRQ? Different ACPI or APIC settings may help. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (2047 buckets, 16376 max) - 432 bytes per conntrack eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 bootsplash 3.1.4-2004/02/19: looking for picture.... found (1024x768, 16923 bytes, v3). bootsplash: status on console 0 changed to on agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode eth1: no IPv6 routers present eth0: no IPv6 routers present (scsi1:A:4): 10.000MB/s transfers (10.000MHz, offset 8) Vendor: TEAC Model: CD-W512SB Rev: 1.0B Type: CD-ROM ANSI SCSI revision: 02 sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Attached scsi CD-ROM sr1 at scsi1, channel 0, id 4, lun 0 Attached scsi generic sg1 at scsi1, channel 0, id 4, lun 0, type 5 CAPI Subsystem Rev 1.1.2.8 b1: revision 1.1.2.2 b1dma: revision 1.1.2.3 b1pci: PCI BIOS reports AVM-B1 at i/o 0x9c00, irq 18 kcapi: Controller 1: b1pci-9c00 attached b1pci: AVM B1 PCI at i/o 0x9c00, irq 18, revision 2 b1pci: revision 1.1.2.2 libata version 1.02 loaded. sata_sil version 0.54 ata1: SATA max UDMA/100 cmd 0xFFFFFF00021F9080 ctl 0xFFFFFF00021F908A bmdma 0xFFFFFF00021F9000 irq 17 ata2: SATA max UDMA/100 cmd 0xFFFFFF00021F90C0 ctl 0xFFFFFF00021F90CA bmdma 0xFFFFFF00021F9008 irq 17 ata1: no device found (phy stat 00000000) scsi2 : sata_sil ata1: thread exiting ata2: no device found (phy stat 00000000) scsi3 : sata_sil ata2: thread exiting USB Universal Host Controller Interface driver v2.2 /proc/cmdline: hdc=ide-scsi vga=0x317 video=mtrr,vesa=1024x768 root=/dev/hdb3 acpi=force apic console=tty0 lsmod: Module Size Used by uhci_hcd 29408 0 sata_sil 6532 0 libata 36864 1 sata_sil,[permanent] b1pci 7936 0 b1dma 15620 1 b1pci b1 22464 2 b1pci,b1dma kernelcapi 48992 3 b1pci,b1dma,b1 ppp_synctty 8704 0 ppp_async 11072 1 ipt_TOS 2432 20 iptable_mangle 2752 1 ipt_REJECT 5824 2 ipt_MASQUERADE 3520 1 iptable_nat 22860 2 ipt_MASQUERADE ipt_state 1984 110 ip_conntrack 33756 3 ipt_MASQUERADE,iptable_nat,ipt_state ipt_limit 2496 16 iptable_filter 2752 1 ip_tables 17024 8 ipt_TOS,iptable_mangle,ipt_REJECT,ipt_MASQUERADE,iptable_nat,ipt_state,ipt_limit,iptable_filter parport_pc 32832 1 lp 10096 0 aic7xxx 177592 1 ehci_hcd 26116 0 ohci_hcd 18372 0 usbcore 102768 5 uhci_hcd,ehci_hcd,ohci_hcd v4l1_compat 12100 0 tuner 18444 0 tvaudio 22028 0 bttv 165068 0 video_buf 18500 1 bttv i2c_algo_bit 8712 1 bttv v4l2_common 6720 1 bttv btcx_risc 4360 1 bttv i2c_core 20676 4 tuner,tvaudio,bttv,i2c_algo_bit videodev 9728 1 bttv snd_pcm_oss 52644 0 snd_mixer_oss 17728 1 snd_pcm_oss snd_intel8x0 32036 0 snd_ac97_codec 65156 1 snd_intel8x0 snd_pcm 94284 2 snd_pcm_oss,snd_intel8x0 snd_timer 23368 1 snd_pcm snd_page_alloc 9992 2 snd_intel8x0,snd_pcm snd_mpu401_uart 6912 1 snd_intel8x0 snd_rawmidi 22176 1 snd_mpu401_uart snd_seq_device 7244 1 snd_rawmidi snd 48936 9 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device ide_scsi 15172 1 ppp_generic 30752 6 ppp_synctty,ppp_async slhc 6720 1 ppp_generic nvidia 2565236 0 r8169 16260 0 8139too 22144 0 parport 39564 2 parport_pc,lp sr_mod 15012 0 lspci -vvxxx: 0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 00: de 10 dd 00 07 01 a0 00 a2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 80 90 c0 80 a2 20: 00 f3 f0 f4 00 f0 f0 f0 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 40: 00 00 03 00 01 00 02 00 01 00 00 00 00 00 44 00 50: 00 00 fe 1f 00 00 00 00 ff 1f 00 00 03 00 80 00 60: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- 00: de 10 d2 00 07 01 20 02 a4 00 04 06 00 10 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 0a f0 00 20 22 20: 00 f1 f0 f2 00 e8 f0 ef 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 40: 01 00 00 00 00 00 f0 1f 20 00 00 00 00 00 00 00 50: 00 00 00 e0 00 f0 ff e7 ff ff ff ff ff ff ff ff 60: ff 40 ff 40 00 00 00 20 00 00 00 20 ff ff ff ff 70: ff ff ff ff 00 00 00 00 00 00 00 00 ff ff ff ff 80: ff ff ff ff 00 80 00 00 ed 01 00 00 ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0: 1b 42 00 1f 00 00 00 00 0c 00 00 00 00 00 00 00 b0: 04 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 20 00 00 80 7c ff 32 07 00 06 30 07 d0: 00 00 00 00 00 00 00 00 08 00 00 e0 ff ff ff e7 e0: b0 b5 f7 ef 90 7f af bf 70 d5 7e df f0 fe ef b9 f0: b0 f6 57 ff e0 ff ef bf d0 3e ef ff 70 f5 f7 ef 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-