Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Mon, 9 Apr 2001 20:16:13 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Mon, 9 Apr 2001 20:16:03 -0400 Received: from light.kappa.ro ([194.102.249.27]:64783 "EHLO light.kappa.ro") by vger.kernel.org with ESMTP id ; Mon, 9 Apr 2001 20:15:53 -0400 Message-ID: <001901c0c15a$a47bfb60$e8c6e7c1@hybrid> From: "Alexandru Barloiu Nicolae" To: "Mark Hahn" Cc: In-Reply-To: Subject: Re: Compaq proliant ML-350 - IDE & SCSI Date: Tue, 10 Apr 2001 03:07:01 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2462.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2462.0000 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org 2.4.4-p1 is the kernel version that i've tried now. no succes with 2.4.3 and below. i've been trying without the CDROM and a normal HDD ata 66. i've made some progress using the normal ide ata 66 driver and removing the osv4 from kernel. root@light:/# hdparm -t -T /dev/hda /dev/hda: Timing buffer-cache reads: 128 MB in 0.81 seconds =158.02 MB/sec Timing buffered disk reads: MB in 8.41 seconds = 7.61 MB/sec root@light:/# hdparm -v /dev/hda /dev/hda: multcount = 16 (on) I/O support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 2586/240/63, sectors = 39102336, start = 0 still my bios is set to enhaced DMA. i am still working on UDMA. if u have any suggestions i still wait for a solution. axl ----- Original Message ----- From: "Mark Hahn" To: "Alexandru Barloiu Nicolae" Sent: Tuesday, April 10, 2001 1:39 AM Subject: Re: Compaq proliant ML-350 - IDE & SCSI > > ServerWorks OSB4: IDE controller on PCI bus 00 dev 79 > > ugh. not a widely-respected implementation. I don't think you mentioned > which kernel you're runnint, either, since there have been several successive > generations of workarounds for SW ide/etc stuff. > > > hda: WDC WD200EB-00BHF0, ATA DISK drive > > hdb: Compaq CRD-8402B, ATAPI CD/DVD-ROM drive > > sharing a channel like this is not a good idea. you should definitely > test without the cdrom drive. all your ide cables are 18" or less? > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/