Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263435AbUD3KnQ (ORCPT ); Fri, 30 Apr 2004 06:43:16 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264823AbUD3KnQ (ORCPT ); Fri, 30 Apr 2004 06:43:16 -0400 Received: from mailout08.sul.t-online.com ([194.25.134.20]:40898 "EHLO mailout08.sul.t-online.com") by vger.kernel.org with ESMTP id S263435AbUD3KnN (ORCPT ); Fri, 30 Apr 2004 06:43:13 -0400 Date: Fri, 30 Apr 2004 12:42:29 +0200 From: kladit@t-online.de (Klaus Dittrich) To: linux mailing-list Subject: 2.6.6-rc3 scsi symbios prevents booting Message-ID: <20040430104229.GA595@xeon2.local.here> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.4i X-Seen: false X-ID: Th0hd6Zr8eAbCgWR1avGHuUUZG8HMvo7X7++2EvVxzXGWiKvHx1k4g Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3320 Lines: 78 Booting kernel-2.6.6-rc3 hangs because of the Symbios scsi-driver. No errors with kernel-2.6.5. (Mobo Tyan S2665, Dawicontrol DC-2964F (Chip used is AM53C974) I get this messages .. (copied by hand from bootscreen). Beginning Domain Validation sym0:5 FAST SCSI 10 MB/s ST (100.0ns,offset 15) scsi(2:0:5:0) ECHO BUFFER SIZE 5924 ist too big, trimming to 4096 scsi(2:0:5:0) Domain Validation detected failure, dropping back. sym0:5 FAST SCSI 6.8 MB/s ST (148.0ns,offset 15) scsi(2:0:5:0) Domain Validation detected failure, dropping back. sym0:5:0 asynchronous # This appeares two times sym0:5:0 ABORT OPERATION started sym0:5:0 ABORT OPERATION timed out sym0:5:0 BUS RESET started sym0:5:0 BUS RESET timed out sym0:5:0 DEVICE RESET started sym0:5:0 DEVICE RESET timed out The system then hangs. In contrast to this the messages from from kernel-2.6.5. No errors here. All scsi-devices are working. scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs (scsi0:A:9): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) (scsi0:A:10): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Vendor: FUJITSU Model: MAP3367NC Rev: 0108 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:9:0: Tagged Queuing enabled. Depth 32 Vendor: FUJITSU Model: MAP3367NC Rev: 0108 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:10:0: Tagged Queuing enabled. Depth 32 scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs sym0: <875> rev 0x4 at pci 0000:05:01.0 irq 22 sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: SCSI BUS has been reset. scsi2 : sym-2.1.18i Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Vendor: EPSON Model: Perfection1640 Rev: 1.06 Type: Processor ANSI SCSI revision: 02 st: Version 20040318, fixed bufsize 32768, s/g segs 256 SCSI device sda: 71775284 512-byte hdwr sectors (36749 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 Attached scsi disk sda at scsi0, channel 0, id 9, lun 0 SCSI device sdb: 71775284 512-byte hdwr sectors (36749 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 Attached scsi disk sdb at scsi0, channel 0, id 10, lun 0 sym0:2: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 16) sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Attached scsi CD-ROM sr0 at scsi2, channel 0, id 2, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 9, lun 0, type 0 Attached scsi generic sg1 at scsi0, channel 0, id 10, lun 0, type 0 Attached scsi generic sg2 at scsi2, channel 0, id 2, lun 0, type 5 Attached scsi generic sg3 at scsi2, channel 0, id 5, lun 0, type 3 Hope this helps to find the bug(s). -- Klaus - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/