Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265703AbUFDJu3 (ORCPT ); Fri, 4 Jun 2004 05:50:29 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265693AbUFDJu3 (ORCPT ); Fri, 4 Jun 2004 05:50:29 -0400 Received: from host213-160-108-25.dsl.vispa.com ([213.160.108.25]:46748 "HELO cenedra.office") by vger.kernel.org with SMTP id S265715AbUFDJpo (ORCPT ); Fri, 4 Jun 2004 05:45:44 -0400 From: Andrew Walrond To: linux-kernel@vger.kernel.org Subject: [ACPI] Asus SK8N (x86_64) motherboard ata1 DMA timeout (Promise SATA) Date: Fri, 4 Jun 2004 10:45:36 +0100 User-Agent: KMail/1.6 Cc: len.brown@intel.com MIME-Version: 1.0 Content-Disposition: inline Content-Type: Multipart/Mixed; boundary="Boundary-00=_ATEwAoMhelHg9Zk" Message-Id: <200406041045.36908.andrew@walrond.org> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29598 Lines: 666 --Boundary-00=_ATEwAoMhelHg9Zk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Using linux-2.6.7-rc2 (32bit), two SATA drives on Promise TX2plus. The bios= =20 has been upgraded to latest version 1007. Without any kernel parameters, the i/o locks after a short time copying fil= es.=20 Copied by hand from dmesg after i/o freeze: ata1 DMA timeout scsi0: ERROR on channel 0, id 0, lun 0, CDB: 0x2a 00 04 ae a2 f2 00 00 08 00 Current sda: sense =3D 70 3 ASC=3D c ASCQ=3D 2 Raw sense data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00 0x00= =20 0x0c 0x02 end_request: I/O error, dev sda, sector 78553842 I guess this is interrupt related? =46rom dmesg without kernel params (broken case) ata1: SATA max UDMA/133 cmd 0xF8ABF200 ctl 0xF8ABF238 bmdma 0x0 irq 19 ata2: SATA max UDMA/133 cmd 0xF8ABF280 ctl 0xF8ABF2B8 bmdma 0x0 irq 19 =46rom dmesg with acpi=3Doff (working fine) ata1: SATA max UDMA/133 cmd 0xF8AB6200 ctl 0xF8AB6238 bmdma 0x0 irq 11 ata2: SATA max UDMA/133 cmd 0xF8AB6280 ctl 0xF8AB62B8 bmdma 0x0 irq 11 =46ull dmesg's are attached for working and broken cases. Let me know if I = can=20 provide any more information. Andrew Walrond --Boundary-00=_ATEwAoMhelHg9Zk Content-Type: text/plain; charset="us-ascii"; name="dmesg.no_kernel_params" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.no_kernel_params" Linux version 2.6.7-rc2 (root@orac.shed) (gcc version 3.4.0) #3 Thu Jun 3 17:02:06 GMT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable) BIOS-e820: 00000000bffc0000 - 00000000bffd0000 (ACPI data) BIOS-e820: 00000000bffd0000 - 00000000c0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000e7000 - 0000000000100000 (reserved) user: 0000000000100000 - 00000000bffc0000 (usable) user: 00000000bffc0000 - 00000000bffd0000 (ACPI data) user: 00000000bffd0000 - 00000000c0000000 (ACPI NVS) user: 00000000fec00000 - 00000000fec01000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ff7c0000 - 0000000100000000 (reserved) user: 0000000100000000 - 0000000140000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 1048576 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 819200 pages, LIFO batch:16 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fa500 ACPI: XSDT (v001 A M I OEMXSDT 0x03000429 MSFT 0x00000097) @ 0xbffc0100 ACPI: FADT (v003 A M I OEMFACP 0x03000429 MSFT 0x00000097) @ 0xbffc0290 ACPI: MADT (v001 A M I OEMAPIC 0x03000429 MSFT 0x00000097) @ 0xbffc0390 ACPI: OEMB (v001 A M I OEMBIOS 0x03000429 MSFT 0x00000097) @ 0xbffd0040 ACPI: DSDT (v001 SK8N_ SK8N_701 0x00000701 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 1 IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: root=/dev/sda1 vga=0x307 mem=5242880K Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1400.114 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 3107364k/4194304k available (2678k kernel code, 36980k reserved, 858k data, 164k init, 2227968k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2768.89 BogoMIPS Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes) Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Opteron(tm) Processor 240 stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... works. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1399.0786 MHz. ..... host bus clock speed is 199.0969 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 19) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 17) *11 ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *11 ACPI: PCI Interrupt Link [LUS0] (IRQs 20) *5 ACPI: PCI Interrupt Link [LUS1] (IRQs 20) *5 ACPI: PCI Interrupt Link [LUS2] (IRQs 20) *10 ACPI: PCI Interrupt Link [LKLN] (IRQs 21) *10 ACPI: PCI Interrupt Link [LAUI] (IRQs 21) *11 ACPI: PCI Interrupt Link [LKMO] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 22) *0, disabled. ACPI-0201: *** Error: Return object type is incorrect [\_SB_.LATA._CRS] (Node f7f6f388), AE_TYPE ACPI: PCI Interrupt Link [LATA] (IRQs 22) *0 SCSI subsystem initialized ACPI: PCI Interrupt Link [LKSM] enabled at IRQ 22 00:00:01[A] -> 1-22 -> IRQ 22 level high ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 00:00:02[A] -> 1-20 -> IRQ 20 level high ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21 00:00:06[A] -> 1-21 -> IRQ 21 level high ACPI: PCI Interrupt Link [LKMO] enabled at IRQ 21 ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 20 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 16 00:00:0b[A] -> 1-16 -> IRQ 16 level high ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 00:01:03[A] -> 1-17 -> IRQ 17 level high ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 00:01:03[B] -> 1-18 -> IRQ 18 level high ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 00:01:03[C] -> 1-19 -> IRQ 19 level high ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17 number of MP IRQ sources: 15. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 1 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 0 0 1 1 C1 11 001 01 1 1 0 0 0 1 1 C9 12 001 01 1 1 0 0 0 1 1 D1 13 001 01 1 1 0 0 0 1 1 D9 14 001 01 1 1 0 0 0 1 1 B1 15 001 01 1 1 0 0 0 1 1 B9 16 001 01 1 1 0 0 0 1 1 A9 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 .................................... done. PCI: Using ACPI for IRQ routing vesafb: framebuffer at 0xe0000000, mapped to 0xf8809000, size 2560k vesafb: mode is 1280x1024x8, linelength=1280, pages=1 vesafb: protected mode interface info at c000:e350 vesafb: scrolling: redraw mtrr: type mismatch for e0000000,200000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,100000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,80000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,40000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,20000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,10000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,8000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,4000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,2000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,1000 old: uncachable new: write-combining mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x800 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x400 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x200 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x100 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x80 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x40 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x20 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x10 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x8 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x4 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x2 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x1 base: 0xe0000000 fb0: VESA VGA frame buffer device Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.13 highmem bounce pool size: 64 pages udf: registering filesystem SGI XFS with large block numbers, no debug enabled ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) Console: switching to colour frame buffer device 160x64 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: Maximum main memory to use for agp memory: 3932M agpgart: AGP aperture is 128M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25. PCI: Enabling device 0000:00:05.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:05.0 to 64 eth0: forcedeth.c: subsystem: 01043:80c5 bound to 0000:00:05.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3: IDE controller at PCI slot 0000:00:08.0 NFORCE3: chipset revision 165 NFORCE3: not 100% native mode: will probe irqs later NFORCE3: 0000:00:08.0 (rev a5) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio hda: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.02 loaded. sata_promise version 1.00 ata1: SATA max UDMA/133 cmd 0xF8ABF200 ctl 0xF8ABF238 bmdma 0x0 irq 19 ata2: SATA max UDMA/133 cmd 0xF8ABF280 ctl 0xF8ABF2B8 bmdma 0x0 irq 19 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 240121728 sectors: ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f ata2: dev 0 ATA, max UDMA/133, 240121728 sectors: ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 32768 buckets, 256Kbytes TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S3 S4 S5) ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 164k freed ReiserFS: sdb1: found reiserfs format "3.6" with standard journal ReiserFS: sdb1: using ordered data mode ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb1: checking transaction log (sdb1) ReiserFS: sdb1: Using r5 hash to sort names Adding 1959888k swap on /dev/sda5. Priority:-1 extents:1 --Boundary-00=_ATEwAoMhelHg9Zk Content-Type: text/plain; charset="us-ascii"; name="dmesg.acpi_off" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg.acpi_off" Linux version 2.6.7-rc2 (root@orac.shed) (gcc version 3.4.0) #3 Thu Jun 3 17:02:06 GMT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffc0000 (usable) BIOS-e820: 00000000bffc0000 - 00000000bffd0000 (ACPI data) BIOS-e820: 00000000bffd0000 - 00000000c0000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000e7000 - 0000000000100000 (reserved) user: 0000000000100000 - 00000000bffc0000 (usable) user: 00000000bffc0000 - 00000000bffd0000 (ACPI data) user: 00000000bffd0000 - 00000000c0000000 (ACPI NVS) user: 00000000fec00000 - 00000000fec01000 (reserved) user: 00000000fee00000 - 00000000fee01000 (reserved) user: 00000000ff7c0000 - 0000000100000000 (reserved) user: 0000000100000000 - 0000000140000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 1048576 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 819200 pages, LIFO batch:16 DMI 2.3 present. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: TEMPLATE Product ID: SK8N APIC at: 0xFEE00000 Processor #0 15:5 APIC version 16 I/O APIC #1 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Built 1 zonelists Kernel command line: root=/dev/sda1 acpi=off vga=0x307 mem=5242880K Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1399.846 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 3107364k/4194304k available (2678k kernel code, 36980k reserved, 858k data, 164k init, 2227968k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2768.89 BogoMIPS Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes) Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Opteron(tm) Processor 240 stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 1 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 1 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. number of MP IRQ sources: 16. number of IO-APIC #1 registers: 24. testing the IO APIC....................... IO APIC #1...... .... register #00: 01000000 ....... : physical APIC id: 01 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 01000000 ....... : arbitration: 01 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1399.0786 MHz. ..... host bus clock speed is 199.0969 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [10de/00d0] at 0000:00:01.0 vesafb: framebuffer at 0xe0000000, mapped to 0xf8800000, size 2560k vesafb: mode is 1280x1024x8, linelength=1280, pages=1 vesafb: protected mode interface info at c000:e350 vesafb: scrolling: redraw mtrr: type mismatch for e0000000,200000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,100000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,80000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,40000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,20000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,10000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,8000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,4000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,2000 old: uncachable new: write-combining mtrr: type mismatch for e0000000,1000 old: uncachable new: write-combining mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x800 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x400 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x200 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x100 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x80 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x40 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x20 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x10 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x8 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x4 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x2 base: 0xe0000000 mtrr: size and base must be multiples of 4 kiB mtrr: size: 0x1 base: 0xe0000000 fb0: VESA VGA frame buffer device Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.13 highmem bounce pool size: 64 pages udf: registering filesystem SGI XFS with large block numbers, no debug enabled Console: switching to colour frame buffer device 160x64 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: Maximum main memory to use for agp memory: 3932M agpgart: AGP aperture is 128M @ 0xf0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25. PCI: Enabling device 0000:00:05.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:05.0 to 64 eth0: forcedeth.c: subsystem: 01043:80c5 bound to 0000:00:05.0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3: IDE controller at PCI slot 0000:00:08.0 NFORCE3: chipset revision 165 NFORCE3: not 100% native mode: will probe irqs later NFORCE3: 0000:00:08.0 (rev a5) UDMA133 controller ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio hda: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 libata version 1.02 loaded. sata_promise version 1.00 ata1: SATA max UDMA/133 cmd 0xF8AB6200 ctl 0xF8AB6238 bmdma 0x0 irq 11 ata2: SATA max UDMA/133 cmd 0xF8AB6280 ctl 0xF8AB62B8 bmdma 0x0 irq 11 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 240121728 sectors: ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:407f ata2: dev 0 ATA, max UDMA/133, 240121728 sectors: ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 32768 buckets, 256Kbytes TCP: Hash tables configured (established 524288 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 164k freed ReiserFS: sdb1: found reiserfs format "3.6" with standard journal ReiserFS: sdb1: using ordered data mode ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdb1: checking transaction log (sdb1) ReiserFS: sdb1: Using r5 hash to sort names Adding 1959888k swap on /dev/sda5. Priority:-1 extents:1 ReiserFS: sda2: found reiserfs format "3.6" with standard journal ReiserFS: sda2: using ordered data mode ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda2: checking transaction log (sda2) ReiserFS: sda2: Using r5 hash to sort names --Boundary-00=_ATEwAoMhelHg9Zk-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/