Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262873AbUFJUAH (ORCPT ); Thu, 10 Jun 2004 16:00:07 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262850AbUFJUAH (ORCPT ); Thu, 10 Jun 2004 16:00:07 -0400 Received: from [80.72.36.106] ([80.72.36.106]:64146 "EHLO alpha.polcom.net") by vger.kernel.org with ESMTP id S262873AbUFJT6R (ORCPT ); Thu, 10 Jun 2004 15:58:17 -0400 Date: Thu, 10 Jun 2004 21:57:58 +0200 (CEST) From: Grzegorz Kulewski To: akpm@osdl.org Cc: linux-kernel@vger.kernel.org Subject: 2.6.7-rc3-mm1 problems (ACPI and others) In-Reply-To: <200406102045.i5AKjDJo017156@snoqualmie.dp.intel.com> Message-ID: References: <200406102045.i5AKjDJo017156@snoqualmie.dp.intel.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 53596 Lines: 1851 Hi, I have the following problems with 2.6.7-rc3-mm1: 1. ACPI is still broken for me. It was broken on 2.6.7-rc2-mm2 (as I reported previously) but was working fine with 2.6.6-mm4 (see log). 2. Why is RTC complaining (see log)? 3. PERFCTR gives me compile time errors (see compiler messages). Do I need any special patches? Here is my log: Jun 10 20:22:28 polb01 Linux version 2.6.7-rc3-mm1 (root@polb01) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #1 Thu Jun 10 20:12:55 CEST 2004 Jun 10 20:22:28 polb01 BIOS-provided physical RAM map: Jun 10 20:22:28 polb01 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Jun 10 20:22:28 polb01 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Jun 10 20:22:28 polb01 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Jun 10 20:22:28 polb01 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) Jun 10 20:22:28 polb01 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) Jun 10 20:22:28 polb01 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) Jun 10 20:22:28 polb01 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) Jun 10 20:22:28 polb01 511MB LOWMEM available. Jun 10 20:22:28 polb01 On node 0 totalpages: 131056 Jun 10 20:22:28 polb01 DMA zone: 4096 pages, LIFO batch:1 Jun 10 20:22:28 polb01 Normal zone: 126960 pages, LIFO batch:16 Jun 10 20:22:28 polb01 HighMem zone: 0 pages, LIFO batch:1 Jun 10 20:22:28 polb01 DMI 2.2 present. Jun 10 20:22:28 polb01 ACPI: RSDP (v000 761686 ) @ 0x000f6810 Jun 10 20:22:28 polb01 ACPI: RSDT (v001 761686 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 Jun 10 20:22:28 polb01 ACPI: FADT (v001 761686 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 Jun 10 20:22:28 polb01 ACPI: DSDT (v001 761686 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 Jun 10 20:22:28 polb01 ACPI: PM-Timer IO Port: 0x4008 Jun 10 20:22:28 polb01 Built 1 zonelists Jun 10 20:22:28 polb01 Local APIC disabled by BIOS -- reenabling. Jun 10 20:22:28 polb01 Found and enabled local APIC! Jun 10 20:22:28 polb01 Initializing CPU#0 Jun 10 20:22:28 polb01 Kernel command line: ro root=/dev/hdd4 Jun 10 20:22:28 polb01 PID hash table entries: 2048 (order 11: 16384 bytes) Jun 10 20:22:28 polb01 Detected 1001.762 MHz processor. Jun 10 20:22:28 polb01 Using pmtmr for high-res timesource Jun 10 20:22:28 polb01 Console: colour VGA+ 80x25 Jun 10 20:22:28 polb01 Memory: 514656k/524224k available (2878k kernel code, 8816k reserved, 789k data, 140k init, 0k highmem) Jun 10 20:22:28 polb01 Checking if this processor honours the WP bit even in supervisor mode... Ok. Jun 10 20:22:28 polb01 Calibrating delay loop... 1982.46 BogoMIPS Jun 10 20:22:28 polb01 Security Scaffold v1.0.0 initialized Jun 10 20:22:28 polb01 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Jun 10 20:22:28 polb01 Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Jun 10 20:22:28 polb01 Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Jun 10 20:22:28 polb01 CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 Jun 10 20:22:28 polb01 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 Jun 10 20:22:28 polb01 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Jun 10 20:22:28 polb01 CPU: L2 Cache: 256K (64 bytes/line) Jun 10 20:22:28 polb01 CPU: After all inits, caps: 0183fbf7 c1c7fbff 00000000 00000020 Jun 10 20:22:28 polb01 Intel machine check architecture supported. Jun 10 20:22:28 polb01 Intel machine check reporting enabled on CPU#0. Jun 10 20:22:28 polb01 CPU: AMD Athlon(tm) processor stepping 02 Jun 10 20:22:28 polb01 Enabling fast FPU save and restore... done. Jun 10 20:22:28 polb01 Checking 'hlt' instruction... OK. Jun 10 20:22:28 polb01 enabled ExtINT on CPU#0 Jun 10 20:22:28 polb01 ESR value before enabling vector: 00000000 Jun 10 20:22:28 polb01 ESR value after enabling vector: 00000000 Jun 10 20:22:28 polb01 Using local APIC timer interrupts. Jun 10 20:22:28 polb01 calibrating APIC timer ... Jun 10 20:22:28 polb01 ..... CPU clock speed is 1001.0108 MHz. Jun 10 20:22:28 polb01 ..... host bus clock speed is 266.0962 MHz. Jun 10 20:22:28 polb01 NET: Registered protocol family 16 Jun 10 20:22:28 polb01 PCI: PCI BIOS revision 2.10 entry at 0xfb5e0, last bus=1 Jun 10 20:22:28 polb01 PCI: Using configuration type 1 Jun 10 20:22:28 polb01 mtrr: v2.0 (20020519) Jun 10 20:22:28 polb01 ACPI: Subsystem revision 20040326 Jun 10 20:22:28 polb01 spurious 8259A interrupt: IRQ7. Jun 10 20:22:28 polb01 ACPI: IRQ11 SCI: Level Trigger. Jun 10 20:22:28 polb01 ACPI: Interpreter enabled Jun 10 20:22:28 polb01 ACPI: Using PIC for interrupt routing Jun 10 20:22:28 polb01 ACPI: PCI Root Bridge [PCI0] (00:00) Jun 10 20:22:28 polb01 PCI: Probing PCI hardware (bus 00) Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9 Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Jun 10 20:22:28 polb01 PCI: Using ACPI for IRQ routing Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 11 (level, low) -> IRQ 11 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11 Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11 Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:0d.1[A] -> GSI 5 (level, low) -> IRQ 5 Jun 10 20:22:28 polb01 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 10 (level, low) -> IRQ 10 Jun 10 20:22:28 polb01 audit: initializing netlink socket (disabled) Jun 10 20:22:28 polb01 audit(1086898862.790:0): initialized Jun 10 20:22:28 polb01 Total HugeTLB memory allocated, 0 Jun 10 20:22:28 polb01 VFS: Disk quotas dquot_6.5.1 Jun 10 20:22:28 polb01 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Jun 10 20:22:28 polb01 SGI XFS with ACLs, security attributes, realtime, no debug enabled Jun 10 20:22:28 polb01 SGI XFS Quota Management subsystem Jun 10 20:22:28 polb01 Initializing Cryptographic API Jun 10 20:22:28 polb01 8139too Fast Ethernet driver 0.9.27 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 11 (level, low) -> IRQ 11 Jun 10 20:22:28 polb01 eth0: RealTek RTL8139 at 0xe000, 00:06:4f:00:73:8b, IRQ 11 Jun 10 20:22:28 polb01 eth0: Identified 8139 chip type 'RTL-8139C' Jun 10 20:22:28 polb01 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Jun 10 20:22:28 polb01 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Jun 10 20:22:28 polb01 VP_IDE: IDE controller at PCI slot 0000:00:07.1 Jun 10 20:22:28 polb01 VP_IDE: chipset revision 6 Jun 10 20:22:28 polb01 VP_IDE: not 100% native mode: will probe irqs later Jun 10 20:22:28 polb01 VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 Jun 10 20:22:28 polb01 ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA Jun 10 20:22:28 polb01 ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA Jun 10 20:22:28 polb01 hda: SAMSUNG SV6004H, ATA DISK drive Jun 10 20:22:28 polb01 hdb: HL-DT-ST DVDRAM GSA-4082B, ATAPI CD/DVD-ROM drive Jun 10 20:22:28 polb01 Using anticipatory io scheduler Jun 10 20:22:28 polb01 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jun 10 20:22:28 polb01 hdc: Pioneer DVD-ROM ATAPIModel DVD-115 0133, ATAPI CD/DVD-ROM drive Jun 10 20:22:28 polb01 hdd: SAMSUNG SV3063H, ATA DISK drive Jun 10 20:22:28 polb01 ide1 at 0x170-0x177,0x376 on irq 15 Jun 10 20:22:28 polb01 hda: max request size: 128KiB Jun 10 20:22:28 polb01 hda: 117306000 sectors (60060 MB) w/468KiB Cache, CHS=65535/16/63, UDMA(100) Jun 10 20:22:28 polb01 hda: cache flushes supported Jun 10 20:22:28 polb01 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > Jun 10 20:22:28 polb01 hdd: max request size: 128KiB Jun 10 20:22:28 polb01 hdd: 59797584 sectors (30616 MB) w/426KiB Cache, CHS=59323/16/63, UDMA(100) Jun 10 20:22:28 polb01 hdd: cache flushes supported Jun 10 20:22:28 polb01 hdd: hdd1 hdd2 hdd3 hdd4 Jun 10 20:22:28 polb01 mice: PS/2 mouse device common for all mice Jun 10 20:22:28 polb01 serio: i8042 AUX port at 0x60,0x64 irq 12 Jun 10 20:22:28 polb01 serio: i8042 KBD port at 0x60,0x64 irq 1 Jun 10 20:22:28 polb01 input: AT Translated Set 2 keyboard on isa0060/serio0 Jun 10 20:22:28 polb01 NET: Registered protocol family 2 Jun 10 20:22:28 polb01 IP: routing cache hash table of 1024 buckets, 32Kbytes Jun 10 20:22:28 polb01 TCP: Hash tables configured (established 32768 bind 9362) Jun 10 20:22:28 polb01 ip_conntrack version 2.1 (4095 buckets, 32760 max) - 320 bytes per conntrack Jun 10 20:22:28 polb01 ip_tables: (C) 2000-2002 Netfilter core team Jun 10 20:22:28 polb01 ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ Jun 10 20:22:28 polb01 arp_tables: (C) 2002 David S. Miller Jun 10 20:22:28 polb01 NET: Registered protocol family 17 Jun 10 20:22:28 polb01 ACPI: (supports S0 S1 S4 S5) Jun 10 20:22:28 polb01 kjournald starting. Commit interval 5 seconds Jun 10 20:22:28 polb01 EXT3-fs: hdd4: orphan cleanup on readonly fs Jun 10 20:22:28 polb01 ext3_orphan_cleanup: deleting unreferenced inode 1206476 Jun 10 20:22:28 polb01 EXT3-fs: hdd4: 1 orphan inode deleted Jun 10 20:22:28 polb01 EXT3-fs: recovery complete. Jun 10 20:22:28 polb01 EXT3-fs: mounted filesystem with ordered data mode. Jun 10 20:22:28 polb01 VFS: Mounted root (ext3 filesystem) readonly. Jun 10 20:22:28 polb01 Freeing unused kernel memory: 140k freed Jun 10 20:22:28 polb01 NET: Registered protocol family 1 Jun 10 20:22:28 polb01 EXT3 FS on hdd4, internal journal Jun 10 20:22:28 polb01 Capability LSM initialized Jun 10 20:22:28 polb01 CSLIP: code copyright 1989 Regents of the University of California Jun 10 20:22:28 polb01 PPP generic driver version 2.4.2 Jun 10 20:22:28 polb01 PPP Deflate Compression module registered Jun 10 20:22:28 polb01 NET: Registered protocol family 8 Jun 10 20:22:28 polb01 NET: Registered protocol family 20 Jun 10 20:22:28 polb01 input: PS/2 Generic Mouse on isa0060/serio1 Jun 10 20:22:28 polb01 Unable to handle kernel paging request at virtual address c04b4b00 Jun 10 20:22:28 polb01 printing eip: Jun 10 20:22:28 polb01 c03005eb Jun 10 20:22:28 polb01 *pde = 004fd027 Jun 10 20:22:28 polb01 *pte = 004b4000 Jun 10 20:22:28 polb01 Oops: 0002 [#1] Jun 10 20:22:28 polb01 PREEMPT DEBUG_PAGEALLOC Jun 10 20:22:28 polb01 Modules linked in: ac psmouse pppoatm atm ppp_deflate zlib_deflate zlib_inflate ppp_generic slhc capability commoncap unix Jun 10 20:22:28 polb01 CPU: 0 Jun 10 20:22:28 polb01 EIP: 0060:[] Not tainted VLI Jun 10 20:22:28 polb01 EFLAGS: 00010246 (2.6.7-rc3-mm1) Jun 10 20:22:28 polb01 EIP is at acpi_bus_register_driver+0xd3/0x173 Jun 10 20:22:28 polb01 eax: c04b4b00 ebx: e08e6180 ecx: 000001e1 edx: ffffffed Jun 10 20:22:28 polb01 esi: 00000000 edi: e08e62c0 ebp: de493f84 esp: de493f7c Jun 10 20:22:28 polb01 ds: 007b es: 007b ss: 0068 Jun 10 20:22:28 polb01 Process modprobe (pid: 4994, threadinfo=de492000 task=df1b29f0) Jun 10 20:22:28 polb01 Stack: c04229a0 de492000 de493f8c e08ec032 de493fbc c0140820 dde9bf4c def83790 Jun 10 20:22:28 polb01 ded2c070 de6e9d4c de6e9d6c 00000000 de493fbc 4014c008 0805b168 40097cbb Jun 10 20:22:28 polb01 de492000 c01057bd 4014c008 0002eca7 0805b168 0805b168 40097cbb 0805b168 Jun 10 20:22:28 polb01 Call Trace: Jun 10 20:22:28 polb01 [] show_stack+0x7a/0x90 Jun 10 20:22:28 polb01 [] show_registers+0x14d/0x1b0 Jun 10 20:22:28 polb01 [] die+0xf9/0x250 Jun 10 20:22:28 polb01 [] do_page_fault+0x1d3/0x55b Jun 10 20:22:28 polb01 [] error_code+0x2d/0x38 Jun 10 20:22:28 polb01 [] init_module+0x32/0x51 [ac] Jun 10 20:22:28 polb01 [] sys_init_module+0x1c0/0x390 Jun 10 20:22:28 polb01 [] sysenter_past_esp+0x52/0x71 Jun 10 20:22:28 polb01 Jun 10 20:22:28 polb01 Code: 4c f9 42 c0 01 00 00 00 c7 05 58 f9 42 c0 57 4c 40 c0 c7 05 5c f9 42 c0 59 01 00 00 89 1d cc f9 42 c0 c7 03 c8 f9 42 c0 89 43 04 <89> 18 81 3d 48 f9 42 c0 3c 4b 24 1d 74 1c 68 48 f9 42 c0 68 5b Jun 10 20:22:28 polb01 <6>note: modprobe[4994] exited with preempt_count 1 Jun 10 20:22:28 polb01 Debug: sleeping function called from invalid context at /usr/src/linux-2.6.7-rc3-mm1/include/linux/rwsem.h:43 Jun 10 20:22:28 polb01 in_atomic():1, irqs_disabled():0 Jun 10 20:22:28 polb01 [] dump_stack+0x17/0x20 Jun 10 20:22:28 polb01 [] __might_sleep+0xb4/0xe0 Jun 10 20:22:28 polb01 [] do_exit+0xaf/0x980 Jun 10 20:22:28 polb01 [] die+0x24b/0x250 Jun 10 20:22:28 polb01 [] do_page_fault+0x1d3/0x55b Jun 10 20:22:28 polb01 [] error_code+0x2d/0x38 Jun 10 20:22:28 polb01 [] init_module+0x32/0x51 [ac] Jun 10 20:22:28 polb01 [] sys_init_module+0x1c0/0x390 Jun 10 20:22:28 polb01 [] sysenter_past_esp+0x52/0x71 Jun 10 20:22:28 polb01 Jun 10 20:22:28 polb01 /usr/src/linux-2.6.7-rc3-mm1/drivers/acpi/scan.c:345: spin_lock(/usr/src/linux-2.6.7-rc3-mm1/drivers/acpi/scan.c:c042f948) already locked by /usr/src/linux-2.6.7-rc3-mm1/drivers/acpi/scan.c/345 Jun 10 20:22:28 polb01 ACPI: Power Button (FF) [PWRF] Jun 10 20:22:28 polb01 ACPI: Sleep Button (CM) [SLPB] Jun 10 20:22:28 polb01 ACPI: Processor [CPU0] (supports C1, 2 throttling states) Jun 10 20:22:28 polb01 input: PC Speaker Jun 10 20:22:28 polb01 inserting floppy driver for 2.6.7-rc3-mm1 Jun 10 20:22:28 polb01 Floppy drive(s): fd0 is 1.44M Jun 10 20:22:28 polb01 FDC 0 is a post-1991 82077 Jun 10 20:22:28 polb01 loop: loaded (max 8 devices) Jun 10 20:22:28 polb01 Non-volatile memory driver v1.2 Jun 10 20:22:28 polb01 BIOS EDD facility v0.15 2004-May-17, 2 devices found Jun 10 20:22:28 polb01 device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com Jun 10 20:22:28 polb01 kjournald starting. Commit interval 5 seconds Jun 10 20:22:28 polb01 EXT3 FS on hda5, internal journal Jun 10 20:22:28 polb01 EXT3-fs: mounted filesystem with ordered data mode. Jun 10 20:22:28 polb01 kjournald starting. Commit interval 5 seconds Jun 10 20:22:28 polb01 EXT3 FS on hda6, internal journal Jun 10 20:22:28 polb01 EXT3-fs: mounted filesystem with ordered data mode. Jun 10 20:22:28 polb01 NTFS driver 2.1.13 [Flags: R/O MODULE]. Jun 10 20:22:28 polb01 NTFS volume version 3.1. Jun 10 20:22:28 polb01 usbcore: registered new driver usbfs Jun 10 20:22:28 polb01 usbcore: registered new driver hub Jun 10 20:22:28 polb01 Adding 786424k swap on /mnt/old/home/swap.img. Priority:-1 extents:2227 Jun 10 20:22:28 polb01 rtc: IRQ 0 is not free. Jun 10 20:22:28 polb01 rtc: IRQ 0 is not free. Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10 Jun 10 20:22:28 polb01 parport_pc: Strange, can't probe Via 686A parallel port: io=0x378, irq=-1, dma=-1 Jun 10 20:22:28 polb01 USB Universal Host Controller Interface driver v2.2 Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11 Jun 10 20:22:28 polb01 uhci_hcd 0000:00:07.2: UHCI Host Controller Jun 10 20:22:28 polb01 uhci_hcd 0000:00:07.2: irq 11, io base 0000d800 Jun 10 20:22:28 polb01 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 Jun 10 20:22:28 polb01 hub 1-0:1.0: USB hub found Jun 10 20:22:28 polb01 hub 1-0:1.0: 2 ports detected Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 11 (level, low) -> IRQ 11 Jun 10 20:22:28 polb01 uhci_hcd 0000:00:07.3: UHCI Host Controller Jun 10 20:22:28 polb01 uhci_hcd 0000:00:07.3: irq 11, io base 0000dc00 Jun 10 20:22:28 polb01 uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 Jun 10 20:22:28 polb01 hub 2-0:1.0: USB hub found Jun 10 20:22:28 polb01 hub 2-0:1.0: 2 ports detected Jun 10 20:22:28 polb01 usb 1-1: new full speed USB device using address 2 Jun 10 20:22:28 polb01 usbcore: registered new driver speedtch Jun 10 20:22:28 polb01 usb 1-2: new full speed USB device using address 3 Jun 10 20:22:28 polb01 gameport: pci0000:00:09.1 speed 1242 kHz Jun 10 20:22:28 polb01 Linux video capture interface: v1.00 Jun 10 20:22:28 polb01 bttv: driver version 0.9.14 loaded Jun 10 20:22:28 polb01 bttv: using 32 buffers with 2080k (520 pages) each for capture Jun 10 20:22:28 polb01 bttv: Bt8xx card found (0). Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 5 (level, low) -> IRQ 5 Jun 10 20:22:28 polb01 bttv0: Bt878 (rev 17) at 0000:00:0d.0, irq: 5, latency: 32, mmio: 0xde01b000 Jun 10 20:22:28 polb01 bttv0: using: Prolink Pixelview PV-BT878P+ (Rev.4C,8E) [card=70,insmod option] Jun 10 20:22:28 polb01 bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init] Jun 10 20:22:28 polb01 bttv0: using tuner=25 Jun 10 20:22:28 polb01 bttv0: i2c: checking for MSP34xx @ 0x80... not found Jun 10 20:22:28 polb01 bttv0: i2c: checking for TDA9875 @ 0xb0... not found Jun 10 20:22:28 polb01 bttv0: i2c: checking for TDA7432 @ 0x8a... not found Jun 10 20:22:28 polb01 tvaudio: TV audio decoder + audio/video mux driver Jun 10 20:22:28 polb01 tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z Jun 10 20:22:28 polb01 tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] Jun 10 20:22:28 polb01 tuner: type set to 25 (LG PAL_I+FM (TAPC-I001D)) by bt878 #0 [sw] Jun 10 20:22:28 polb01 bttv0: registered device video0 Jun 10 20:22:28 polb01 bttv0: registered device vbi0 Jun 10 20:22:28 polb01 bttv0: registered device radio0 Jun 10 20:22:28 polb01 bttv0: PLL: 28636363 => 35468950 .. ok Jun 10 20:22:28 polb01 bttv0: add subdevice "remote0" Jun 10 20:22:28 polb01 ACPI: PCI interrupt 0000:00:0d.1[A] -> GSI 5 (level, low) -> IRQ 5 Jun 10 20:22:28 polb01 usb 1-1: usbfs: interface 1 claimed while 'modem_run' sets config #1 Jun 10 20:22:28 polb01 usb 1-1: usbfs: interface 2 claimed while 'modem_run' sets config #1 Jun 10 20:22:28 polb01 eth0: link down Jun 10 20:22:28 polb01 usb 1-1: usbfs: interface 0 claimed while 'modem_run' sets config #1 Jun 10 20:22:28 polb01 usb 1-1: usbfs: interface 1 claimed while 'modem_run' sets config #1 Jun 10 20:22:28 polb01 usb 1-1: usbfs: interface 2 claimed while 'modem_run' sets config #1 Jun 10 20:22:28 polb01 NET: Registered protocol family 10 Jun 10 20:22:28 polb01 Disabled Privacy Extensions on device c0434480(lo) Jun 10 20:22:28 polb01 IPv6 over IPv4 tunneling driver And my config: # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_KERNEL_IMAGE_BZIMAGE=y # CONFIG_KERNEL_IMAGE_ZIMAGE is not set # CONFIG_KERNEL_IMAGE_VMLINUX is not set CONFIG_KERNEL_IMAGE="arch/i386/boot/bzImage" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y # CONFIG_M68K_TOOLCHAIN is not set CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_HOTPLUG=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y CONFIG_HPET_TIMER=y # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y # CONFIG_X86_UP_IOAPIC is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=m # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m # # Firmware Drivers # CONFIG_EDD=m CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y CONFIG_REGPARM=y # # Performance-monitoring counters support # CONFIG_PERFCTR=y # CONFIG_PERFCTR_INIT_TESTS is not set CONFIG_PERFCTR_VIRTUAL=y # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m CONFIG_ACPI_FAN=m CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y # CONFIG_PCI_LEGACY_PROC is not set # CONFIG_PCI_NAMES is not set # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_FAKE=m # CONFIG_HOTPLUG_PCI_COMPAQ is not set # CONFIG_HOTPLUG_PCI_ACPI is not set # CONFIG_HOTPLUG_PCI_CPCI is not set # CONFIG_HOTPLUG_PCI_PCIE is not set # CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=m # # Device Drivers # # # Generic Driver Options # CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_CRYPTOLOOP=m # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_CARMEL is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_LBD is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=m # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_SCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID5 is not set # CONFIG_MD_RAID6 is not set # CONFIG_MD_MULTIPATH is not set CONFIG_BLK_DEV_DM=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m # # Fusion MPT device support # # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # CONFIG_I2O=m CONFIG_I2O_CONFIG=m CONFIG_I2O_BLOCK=m CONFIG_I2O_PROC=m # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_NETLINK_DEV=m CONFIG_UNIX=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y # CONFIG_IP_MROUTE is not set CONFIG_ARPD=y CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m # # IP: Virtual Server Configuration # # CONFIG_IP_VS is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=y # CONFIG_IP_NF_FTP is not set # CONFIG_IP_NF_IRC is not set # CONFIG_IP_NF_TFTP is not set # CONFIG_IP_NF_AMANDA is not set CONFIG_IP_NF_QUEUE=y CONFIG_IP_NF_IPTABLES=y CONFIG_IP_NF_MATCH_LIMIT=y CONFIG_IP_NF_MATCH_IPRANGE=y CONFIG_IP_NF_MATCH_MAC=y CONFIG_IP_NF_MATCH_PKTTYPE=y CONFIG_IP_NF_MATCH_MARK=y CONFIG_IP_NF_MATCH_MULTIPORT=y CONFIG_IP_NF_MATCH_TOS=y CONFIG_IP_NF_MATCH_RECENT=y CONFIG_IP_NF_MATCH_ECN=y CONFIG_IP_NF_MATCH_DSCP=y CONFIG_IP_NF_MATCH_AH_ESP=y CONFIG_IP_NF_MATCH_LENGTH=y CONFIG_IP_NF_MATCH_TTL=y CONFIG_IP_NF_MATCH_TCPMSS=y CONFIG_IP_NF_MATCH_HELPER=y CONFIG_IP_NF_MATCH_STATE=y CONFIG_IP_NF_MATCH_CONNTRACK=y CONFIG_IP_NF_MATCH_OWNER=y CONFIG_IP_NF_FILTER=y CONFIG_IP_NF_TARGET_REJECT=y CONFIG_IP_NF_NAT=y CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=y CONFIG_IP_NF_TARGET_REDIRECT=y CONFIG_IP_NF_TARGET_NETMAP=y CONFIG_IP_NF_TARGET_SAME=y # CONFIG_IP_NF_NAT_LOCAL is not set # CONFIG_IP_NF_NAT_SNMP_BASIC is not set CONFIG_IP_NF_MANGLE=y CONFIG_IP_NF_TARGET_TOS=y CONFIG_IP_NF_TARGET_ECN=y CONFIG_IP_NF_TARGET_DSCP=y CONFIG_IP_NF_TARGET_MARK=y CONFIG_IP_NF_TARGET_CLASSIFY=y CONFIG_IP_NF_TARGET_LOG=y CONFIG_IP_NF_TARGET_ULOG=y CONFIG_IP_NF_TARGET_TCPMSS=y CONFIG_IP_NF_ARPTABLES=y CONFIG_IP_NF_ARPFILTER=y CONFIG_IP_NF_ARP_MANGLE=y # CONFIG_IP_NF_RAW is not set # # IPv6: Netfilter Configuration # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set CONFIG_XFRM=y CONFIG_XFRM_USER=m # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set CONFIG_SCTP_HMAC_SHA1=y # CONFIG_SCTP_HMAC_MD5 is not set CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set # CONFIG_ATM_LANE is not set # CONFIG_ATM_BR2684 is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_CSZ=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_DELAY=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_POLICE=y # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_KGDBOE is not set # CONFIG_NETPOLL is not set # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m CONFIG_ETHERTAP=m # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=m # CONFIG_8139CP is not set CONFIG_8139TOO=y CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_VELOCITY is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # # ATM drivers # # CONFIG_ATM_TCP is not set # CONFIG_ATM_LANAI is not set # CONFIG_ATM_ENI is not set # CONFIG_ATM_FIRESTREAM is not set # CONFIG_ATM_ZATM is not set # CONFIG_ATM_NICSTAR is not set # CONFIG_ATM_IDT77252 is not set # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E_MAYBE is not set # CONFIG_ATM_HE is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_FILTER=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m CONFIG_PPPOATM=m # CONFIG_SLIP is not set CONFIG_SHAPER=m # CONFIG_NETCONSOLE is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # CONFIG_GAMEPORT=m CONFIG_SOUND_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set CONFIG_GAMEPORT_EMU10K1=m # CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set # CONFIG_GAMEPORT_CS461x is not set CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=m # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_RAW=m # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set # CONFIG_JOYSTICK_SIDEWINDER is not set # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDDLER is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set CONFIG_INPUT_JOYDUMP=m # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_UINPUT=m # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=m # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=m CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m # CONFIG_TIPAR is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=m CONFIG_RTC=m # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y CONFIG_HPET_RTC_IRQ=y CONFIG_HPET_NOMMAP=y # CONFIG_HANGCHECK_TIMER is not set # # I2C support # CONFIG_I2C=m CONFIG_I2C_CHARDEV=m # # I2C Algorithms # CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set CONFIG_I2C_ISA=m # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set CONFIG_I2C_VIAPRO=m # CONFIG_I2C_VOODOO3 is not set # # Hardware Sensors Chip support # CONFIG_I2C_SENSOR=m # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_FSCHER is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_MAX1619 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set # # Other I2C Chip support # # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # # # Video Adapters # CONFIG_VIDEO_BT848=m # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_TUNER_3036 is not set # CONFIG_VIDEO_STRADIS is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DPC is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # # Radio Adapters # # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set CONFIG_VIDEO_TUNER=m CONFIG_VIDEO_BUF=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_IR=m # # Graphics support # # CONFIG_FB is not set # CONFIG_VIDEO_SELECT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=m # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_RTCTIMER=m CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # CONFIG_SND_AC97_CODEC=m # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AZT3328 is not set CONFIG_SND_BT87X=m # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set CONFIG_SND_EMU10K1=m # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_DYNAMIC_MINORS=y # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_STORAGE is not set # # USB Human Interface Devices (HID) # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_W9968CF is not set # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set CONFIG_USB_SPEEDTOUCH=m # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_TEST is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_RT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set # CONFIG_SMB_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-2" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # CONFIG_DEBUG_KERNEL=y CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_SLAB=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_PAGEALLOC=y CONFIG_SPINLINE=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_KGDB is not set CONFIG_FRAME_POINTER=y # CONFIG_4KSTACKS is not set CONFIG_SCHEDSTATS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_CAPABILITIES=m # CONFIG_SECURITY_ROOTPLUG is not set # CONFIG_SECURITY_SELINUX is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_TEST is not set # # Library routines # CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y and compilation error: CC drivers/perfctr/x86.o /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c: In function `finalise_backpatching': /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1137: error: syntax error before '{' token /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1133: warning: unused variable `cache' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1134: warning: unused variable `state' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c: At top level: /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1138: warning: type defaults to `int' in declaration of `clear_perfctr_cpus_forbidden_mask' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1138: warning: function declaration isn't a prototype /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1138: error: conflicting types for `clear_perfctr_cpus_forbidden_mask' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1117: error: previous declaration of `clear_perfctr_cpus_forbidden_mask' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1138: warning: data definition has no type or storage class /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1140: warning: type defaults to `int' in declaration of `cache' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1140: warning: initialization makes integer from pointer without a cast /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1140: warning: data definition has no type or storage class /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1141: error: syntax error before numeric constant /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1142: error: syntax error before numeric constant /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1147: error: syntax error before '&' token /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1147: warning: type defaults to `int' in declaration of `perfctr_cpu_sample' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1147: warning: function declaration isn't a prototype /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1147: error: conflicting types for `perfctr_cpu_sample' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1087: error: previous declaration of `perfctr_cpu_sample' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1147: warning: data definition has no type or storage class /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1148: error: syntax error before '&' token /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1148: warning: type defaults to `int' in declaration of `perfctr_cpu_resume' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1148: warning: function declaration isn't a prototype /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1148: error: conflicting types for `perfctr_cpu_resume' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1066: error: previous declaration of `perfctr_cpu_resume' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1148: warning: data definition has no type or storage class /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1149: error: syntax error before '&' token /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1149: warning: type defaults to `int' in declaration of `perfctr_cpu_suspend' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1149: warning: function declaration isn't a prototype /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1149: error: conflicting types for `perfctr_cpu_suspend' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1049: error: previous declaration of `perfctr_cpu_suspend' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1149: warning: data definition has no type or storage class /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1151: warning: type defaults to `int' in declaration of `set_perfctr_cpus_forbidden_mask' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1151: warning: parameter names (without types) in function declaration /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1151: error: conflicting types for `set_perfctr_cpus_forbidden_mask' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1124: error: previous declaration of `set_perfctr_cpus_forbidden_mask' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1151: warning: data definition has no type or storage class /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1153: warning: type defaults to `int' in declaration of `redirect_call_disable' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1153: error: conflicting declarations of `redirect_call_disable' /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:908: error: `redirect_call_disable' previously declared here /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1153: warning: data definition has no type or storage class /usr/src/linux-2.6.7-rc3-mm1/drivers/perfctr/x86.c:1154: error: syntax error before '}' token {standard input}: Assembler messages: {standard input}:2776: Error: symbol `redirect_call_disable' is already defined {standard input}:2776: Warning: rest of line ignored; first ignored character is `,' Could somebody help me? Thanks, Grzegorz Kulewski - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/