Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264518AbUFNVp0 (ORCPT ); Mon, 14 Jun 2004 17:45:26 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264500AbUFNVp0 (ORCPT ); Mon, 14 Jun 2004 17:45:26 -0400 Received: from mail.aei.ca ([206.123.6.14]:52734 "EHLO aeimail.aei.ca") by vger.kernel.org with ESMTP id S264518AbUFNVmc convert rfc822-to-8bit (ORCPT ); Mon, 14 Jun 2004 17:42:32 -0400 From: Ed Tomlinson Organization: me To: linux-kernel@vger.kernel.org Subject: Re: ide errors in 7-rc1-mm1 and later Date: Mon, 14 Jun 2004 17:42:18 -0400 User-Agent: KMail/1.6.2 Cc: Andrew Morton References: <1085689455.7831.8.camel@localhost> <200406032207.25602.edt@aei.ca> <200406091944.15082.edt@aei.ca> In-Reply-To: <200406091944.15082.edt@aei.ca> MIME-Version: 1.0 Content-Disposition: inline Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Message-Id: <200406141742.19260.edt@aei.ca> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15084 Lines: 350 Hi, Still get the errors with 7-rc3-mm2. Will this be fixed anytime soon? TIA Ed > I am still seeing these with 7-rc3-mm1... No extra diag info either. I would be > really nice to see this one fixed. > > TIA > Ed Tomlinson > > On June 3, 2004 10:07 pm, Ed Tomlinson wrote: > > I am still getting these ide errors with 7-rc2-mm2. I get the errors even > > if I mount with barrier=0 (or just defaults). It would seem that something is > > sending my drive commands it does not understand... > > > > May 27 18:18:05 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > May 27 18:18:05 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > > How can we find out what is wrong? > > > > This does not seem to be an error that corrupts the fs, it just slows things > > down when it hits a group of these. Note that they keep poping up - they > > do stop (I still get them hours after booting). > > > > TIA > > Ed Tomlinson > > > > ---------------------- > > 7-mm4 ok > > 7-mm5 na > > 7-rc1-mm1 errors > > 7-rc2 ok > > 7-rc2-mm2 errors > > > > CONFIG_IDE=y > > CONFIG_BLK_DEV_IDE=y > > > > # > > # Please see Documentation/ide.txt for help/info on IDE drives > > # > > # CONFIG_BLK_DEV_HD_IDE is not set > > CONFIG_BLK_DEV_IDEDISK=y > > CONFIG_IDEDISK_MULTI_MODE=y > > # CONFIG_IDEDISK_STROKE is not set > > CONFIG_BLK_DEV_IDECD=m > > CONFIG_BLK_DEV_IDETAPE=m > > # CONFIG_BLK_DEV_IDEFLOPPY is not set > > CONFIG_BLK_DEV_IDESCSI=m > > # CONFIG_IDE_TASK_IOCTL is not set > > CONFIG_IDE_TASKFILE_IO=y > > > > # > > # IDE chipset support/bugfixes > > # > > CONFIG_IDE_GENERIC=y > > # CONFIG_BLK_DEV_CMD640 is not set > > CONFIG_BLK_DEV_IDEPNP=y > > CONFIG_BLK_DEV_IDEPCI=y > > CONFIG_IDEPCI_SHARE_IRQ=y > > # CONFIG_BLK_DEV_OFFBOARD is not set > > # CONFIG_BLK_DEV_GENERIC is not set > > # CONFIG_BLK_DEV_OPTI621 is not set > > # CONFIG_BLK_DEV_RZ1000 is not set > > CONFIG_BLK_DEV_IDEDMA_PCI=y > > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > > CONFIG_IDEDMA_PCI_AUTO=y > > # CONFIG_IDEDMA_ONLYDISK is not set > > CONFIG_BLK_DEV_ADMA=y > > # CONFIG_BLK_DEV_AEC62XX is not set > > # CONFIG_BLK_DEV_ALI15X3 is not set > > # CONFIG_BLK_DEV_AMD74XX is not set > > # CONFIG_BLK_DEV_ATIIXP is not set > > # CONFIG_BLK_DEV_CMD64X is not set > > # CONFIG_BLK_DEV_TRIFLEX is not set > > # CONFIG_BLK_DEV_CY82C693 is not set > > # CONFIG_BLK_DEV_CS5520 is not set > > # CONFIG_BLK_DEV_CS5530 is not set > > # CONFIG_BLK_DEV_HPT34X is not set > > # CONFIG_BLK_DEV_HPT366 is not set > > # CONFIG_BLK_DEV_SC1200 is not set > > CONFIG_BLK_DEV_PIIX=y > > # CONFIG_BLK_DEV_NS87415 is not set > > # CONFIG_BLK_DEV_PDC202XX_OLD is not set > > # CONFIG_BLK_DEV_PDC202XX_NEW is not set > > # CONFIG_BLK_DEV_SVWKS is not set > > # CONFIG_BLK_DEV_SIIMAGE is not set > > # CONFIG_BLK_DEV_SIS5513 is not set > > # CONFIG_BLK_DEV_SLC90E66 is not set > > # CONFIG_BLK_DEV_TRM290 is not set > > # CONFIG_BLK_DEV_VIA82CXXX is not set > > # CONFIG_IDE_ARM is not set > > # CONFIG_IDE_CHIPSETS is not set > > CONFIG_BLK_DEV_IDEDMA=y > > # CONFIG_IDEDMA_IVB is not set > > CONFIG_IDEDMA_AUTO=y > > > > > Think this is not just a barrier problem (unless barrier is the default). > > > One if my two drives gets the error below during operation. > > > The drive is the root drive and is mounted with defaults. 2.6.6-mm4 > > > was the last kernel booted on this box. The 2.6.7-rc1-mm1 was compiled > > > with 2.95 with the following fs options: > > > > > > CONFIG_EXT2_FS=y > > > # CONFIG_EXT2_FS_XATTR is not set > > > CONFIG_EXT3_FS=m > > > # CONFIG_EXT3_FS_XATTR is not set > > > CONFIG_JBD=m > > > # CONFIG_JBD_DEBUG is not set > > > CONFIG_REISERFS_FS=y > > > # CONFIG_REISERFS_CHECK is not set > > > # CONFIG_REISERFS_PROC_INFO is not set > > > # CONFIG_REISERFS_FS_XATTR is not set > > > # CONFIG_JFS_FS is not set > > > # CONFIG_XFS_FS is not set > > > # CONFIG_MINIX_FS is not set > > > # CONFIG_ROMFS_FS is not set > > > # CONFIG_QUOTA is not set > > > # CONFIG_AUTOFS_FS is not set > > > CONFIG_AUTOFS4_FS=m > > > > Disk /dev/hda: 6448 MB, 6448619520 bytes > > 240 heads, 63 sectors/track, 833 cylinders > > Units = cylinders of 15120 * 512 = 7741440 bytes > > > > Device Boot Start End Blocks Id System > > /dev/hda1 1 99 748408+ 82 Linux swap > > /dev/hda2 100 108 68040 83 Linux > > /dev/hda3 * 109 833 5481000 83 Linux > > > > > hda reports: > > > root@bert:/usr/src/linux# hdparm -iI /dev/hda > > > > > > /dev/hda: > > > > > > Model=WDC AC26400R, FwRev=15.01J15, SerialNo=WD-WM6271600165 > > > Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq } > > > RawCHS=13328/15/63, TrkSize=57600, SectSize=600, ECCbytes=40 > > > BuffType=DualPortCache, BuffSize=512kB, MaxMultSect=16, MultSect=16 > > > CurCHS=13328/15/63, CurSects=12594960, LBA=yes, LBAsects=12594960 > > > IORDY=on/off, tPIO={min:160,w/IORDY:120}, tDMA={min:120,rec:120} > > > PIO modes: pio0 pio1 pio2 pio3 pio4 > > > DMA modes: mdma0 mdma1 mdma2 > > > UDMA modes: udma0 udma1 *udma2 udma3 udma4 > > > AdvancedPM=no WriteCache=enabled > > > Drive conforms to: device does not report version: 1 2 3 4 > > > > > > * signifies the current active mode > > > > > > > > > ATA device, with non-removable media > > > Model Number: WDC AC26400R > > > Serial Number: WD-WM6271600165 > > > Firmware Revision: 15.01J15 > > > Standards: > > > Supported: 4 3 2 1 > > > Likely used: 4 > > > Configuration: > > > Logical max current > > > cylinders 13328 13328 > > > heads 15 15 > > > sectors/track 63 63 > > > -- > > > bytes/track: 57600 bytes/sector: 600 > > > CHS current addressable sectors: 12594960 > > > LBA user addressable sectors: 12594960 > > > device size with M = 1024*1024: 6149 MBytes > > > device size with M = 1000*1000: 6448 MBytes (6 GB) > > > Capabilities: > > > LBA, IORDY(can be disabled) > > > Buffer size: 512.0kB bytes avail on r/w long: 40 Queue depth: 1 > > > Standby timer values: spec'd by Standard, no device specific minimum > > > R/W multiple sector transfer: Max = 16 Current = 16 > > > DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 > > > Cycle time: min=120ns recommended=120ns > > > PIO: pio0 pio1 pio2 pio3 pio4 > > > Cycle time: no flow control=160ns IORDY flow control=120ns > > > Commands/features: > > > Enabled Supported: > > > * READ BUFFER cmd > > > * WRITE BUFFER cmd > > > * Look-ahead > > > * Write cache > > > * Power Management feature set > > > * SMART feature set > > > > > > root@bert:/usr/src/linux# hdparm -iI /dev/hdb > > > > > > /dev/hdb: > > > > > > Model=Maxtor 6E030L0, FwRev=NAR61590, SerialNo=E178CV5E > > > Config={ Fixed } > > > RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57 > > > BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16 > > > CurCHS=17475/15/63, CurSects=16513875, LBA=yes, LBAsects=60058656 > > > IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} > > > PIO modes: pio0 pio1 pio2 pio3 pio4 > > > DMA modes: mdma0 mdma1 mdma2 > > > UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6 > > > AdvancedPM=yes: disabled (255) WriteCache=enabled > > > Drive conforms to: (null): > > > > > > * signifies the current active mode > > > > > > > > > ATA device, with non-removable media > > > Model Number: Maxtor 6E030L0 > > > Serial Number: E178CV5E > > > Firmware Revision: NAR61590 > > > Standards: > > > Supported: 7 6 5 4 > > > Likely used: 7 > > > Configuration: > > > Logical max current > > > cylinders 16383 17475 > > > heads 16 15 > > > sectors/track 63 63 > > > -- > > > CHS current addressable sectors: 16513875 > > > LBA user addressable sectors: 60058656 > > > device size with M = 1024*1024: 29325 MBytes > > > device size with M = 1000*1000: 30750 MBytes (30 GB) > > > Capabilities: > > > LBA, IORDY(can be disabled) > > > Queue depth: 1 > > > Standby timer values: spec'd by Standard, no device specific minimum > > > R/W multiple sector transfer: Max = 16 Current = 16 > > > Advanced power management level: unknown setting (0x0000) > > > Recommended acoustic management value: 192, current value: 254 > > > DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6 > > > Cycle time: min=120ns recommended=120ns > > > PIO: pio0 pio1 pio2 pio3 pio4 > > > Cycle time: no flow control=120ns IORDY flow control=120ns > > > Commands/features: > > > Enabled Supported: > > > * NOP cmd > > > * READ BUFFER cmd > > > * WRITE BUFFER cmd > > > * Host Protected Area feature set > > > * Look-ahead > > > * Write cache > > > * Power Management feature set > > > Security Mode feature set > > > * SMART feature set > > > * FLUSH CACHE EXT command > > > * Mandatory FLUSH CACHE command > > > * Device Configuration Overlay feature set > > > * Automatic Acoustic Management feature set > > > SET MAX security extension > > > Advanced Power Management feature set > > > * DOWNLOAD MICROCODE cmd > > > * SMART self-test > > > * SMART error logging > > > Security: > > > Master password revision code = 65534 > > > supported > > > not enabled > > > not locked > > > not frozen > > > not expired: security count > > > not supported: enhanced erase > > > HW reset results: > > > CBLID- above Vih > > > Device num = 1 determined by CSEL > > > Checksum: correct > > > > > > hdb is accessed via dm and evms. This is what the boot of reports: > > > > > > May 27 18:17:39 bert kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > > May 27 18:17:39 bert kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > > May 27 18:17:39 bert kernel: PIIX4: IDE controller at PCI slot 0000:00:14.1 > > > May 27 18:17:39 bert kernel: PIIX4: chipset revision 1 > > > May 27 18:17:39 bert kernel: PIIX4: not 100%% native mode: will probe irqs later > > > May 27 18:17:39 bert kernel: ide0: BM-DMA at 0x10c0-0x10c7, BIOS settings: hda:pio, hdb:DMA > > > May 27 18:17:39 bert kernel: ide1: BM-DMA at 0x10c8-0x10cf, BIOS settings: hdc:DMA, hdd:pio > > > May 27 18:17:39 bert kernel: hda: WDC AC26400R, ATA DISK drive > > > May 27 18:17:39 bert kernel: hdb: Maxtor 6E030L0, ATA DISK drive > > > May 27 18:17:39 bert kernel: Using anticipatory io scheduler > > > May 27 18:17:39 bert kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > > May 27 18:17:39 bert kernel: hdc: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive > > > May 27 18:17:39 bert kernel: ide1 at 0x170-0x177,0x376 on irq 15 > > > May 27 18:17:39 bert kernel: pnp: the driver 'ide' has been registered > > > May 27 18:17:39 bert kernel: hda: max request size: 128KiB > > > May 27 18:17:39 bert kernel: hda: 12594960 sectors (6448 MB) w/512KiB Cache, CHS=13328/15/63, UDMA(33) > > > May 27 18:17:39 bert kernel: hda: cache flushes supported > > > May 27 18:17:39 bert kernel: hda: hda1 hda2 hda3 > > > May 27 18:17:39 bert kernel: hdb: max request size: 128KiB > > > May 27 18:17:39 bert kernel: hdb: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(33) > > > May 27 18:17:39 bert kernel: hdb: cache flushes supported > > > May 27 18:17:39 bert kernel: hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 > > > > > > > followed later by: > > > > > > May 27 18:18:05 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > May 27 18:18:05 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > May 27 18:18:06 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > May 27 18:18:06 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > May 27 18:19:21 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > May 27 18:19:21 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > May 27 18:19:22 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > May 27 18:19:22 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > May 27 18:20:01 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > May 27 18:20:01 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > May 27 18:20:01 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > May 27 18:20:01 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > May 27 18:21:27 bert kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > May 27 18:21:27 bert kernel: hda: drive_cmd: error=0x04 { DriveStatusError } > > > > > > > > > > > > > > > Hope this help, > > > > > > Ed > > > > > > On May 27, 2004 04:24 pm, G?nther Persoons wrote: > > > > Hey, > > > > When i mount my reiser partitie with the option barrier=flush i get > > > > following message and error: > > > > My harddrive is a 2.5 inch Fujitsu 20GB IDE. > > > > > > > > mount /dev/hda10 /tmp -o barrier=flush > > > > mount: wrong fs type, bad option, bad superblock on /dev/hda10, > > > > or too many mounted file systems > > > > Log: > > > > ReiserFS: hda10: found reiserfs format "3.6" with standard journal > > > > ReiserFS: hda10: using ordered data mode > > > > reiserfs: using flush barriers > > > > ReiserFS: hda10: journal params: device hda10, size 8192, journal first > > > > block 18, max trans len 1024, max batch 900, max commit age 30, max > > > > trans age 30 > > > > ReiserFS: hda10: checking transaction log (hda10) > > > > hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } > > > > hda: drive_cmd: error=0x04 { DriveStatusError } > > > > hda: barrier support doesn't work > > > > ReiserFS: hda10: warning: journal-837: IO error during journal replay > > > > ReiserFS: hda10: warning: Replay Failure, unable to mount > > > > ReiserFS: hda10: warning: sh-2022: reiserfs_fill_super: unable to > > > > initialize journal space > > > > > > > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/