Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264609AbUFSThi (ORCPT ); Sat, 19 Jun 2004 15:37:38 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264640AbUFSThh (ORCPT ); Sat, 19 Jun 2004 15:37:37 -0400 Received: from nn3.excitenetwork.com ([207.159.120.57]:64020 "EHLO excite.com") by vger.kernel.org with ESMTP id S264609AbUFSTeo (ORCPT ); Sat, 19 Jun 2004 15:34:44 -0400 To: linux-kernel@vger.kernel.org Subject: Kernel Bug Report X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: ID = 075751693b55023361d19701df71b69f Reply-To: dmlb2000@excite.com From: "David Michael Leo Brown Jr." MIME-Version: 1.0 X-Mailer: PHP Content-Type: multipart/mixed; boundary="EXCITEBOUNDARY_000__720712cbacb740e3123859f2aebf11b1"; Content-Transfer-Encoding: 7bit Message-Id: <20040619193441.71D1A29998@xprdmailfe22.nwk.excite.com> Date: Sat, 19 Jun 2004 15:34:41 -0400 (EDT) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 71346 Lines: 2379 --EXCITEBOUNDARY_000__720712cbacb740e3123859f2aebf11b1 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit see attached _______________________________________________ Join Excite! - http://www.excite.com The most personalized portal on the Web! --EXCITEBOUNDARY_000__720712cbacb740e3123859f2aebf11b1 Content-Type: text/x-log; name="kernel_bug_report.log"; Content-Disposition: attachment; filename="kernel_bug_report.log" Content-Transfer-Encoding: 7bit 1.) System stops on reboot vs. starting normally from shutdown 2.) When I reboot the computer the kernel loads with the dmesg_from_reboot.log then when it trys to Setting Key Map it stops, just plain stops, no output what so ever. I then shut it down, manually, and start it back up and it works fine (see dmesg_from_shutdown.log). 3.) yenta_socket (where the dmesg output differs) modules 4.) # cat /proc/version Linux version 2.6.7 (root@dmlb2004) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #1 Wed Jun 16 12:02:14 PDT 2004 5.) No Oops message 6.) N/A 7.) This is a Toshiba Tectra M2 laptop the bios is kind of different. 7.1) If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux dmlb2004 2.6.7 #1 Wed Jun 16 12:02:14 PDT 2004 i686 Intel(R) Pentium(R) M processor 1400MHz GenuineIntel GNU/Linux Gnu C 3.3.3 Gnu make 3.80 binutils 2.14.90.0.8 util-linux 2.12 mount 2.12 module-init-tools 3.0 e2fsprogs 1.35 pcmcia-cs 3.2.7 Linux C Library 2.3.3 Dynamic linker (ldd) 2.3.3 Procps 3.2.1 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1 Modules Loaded agpgart nvidia irda snd_intel8x0 snd_ac97_codec gameport snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_page_alloc snd_timer snd_mixer_oss snd uhci_hcd ndiswrapper eepro100 mii sbp2 ohci1394 ieee1394 usb_storage ehci_hcd usbcore 7.2) # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Pentium(R) M processor 1400MHz stepping : 5 cpu MHz : 1396.648 cache size : 1024 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe tm2 est bogomips : 2760.70 7.3) # cat /proc/modules agpgart 26408 0 - Live 0xf8fc6000 nvidia 2074504 12 - Live 0xf9246000 irda 117052 0 - Live 0xf8fe2000 snd_intel8x0 29868 0 - Live 0xf8fa2000 snd_ac97_codec 63748 1 snd_intel8x0, Live 0xf8fac000 gameport 3712 1 snd_intel8x0, Live 0xf8f40000 snd_mpu401_uart 5888 1 snd_intel8x0, Live 0xf8f4c000 snd_rawmidi 19108 1 snd_mpu401_uart, Live 0xf8f53000 snd_seq_oss 29824 0 - Live 0xf8f8e000 snd_seq_midi_event 6016 1 snd_seq_oss, Live 0xf8f49000 snd_seq 45968 4 snd_seq_oss,snd_seq_midi_event, Live 0xf8f81000 snd_seq_device 6536 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xf8f46000 snd_pcm_oss 47656 0 - Live 0xf8f74000 snd_pcm 79880 2 snd_intel8x0,snd_pcm_oss, Live 0xf8f5f000 snd_page_alloc 8840 2 snd_intel8x0,snd_pcm, Live 0xf8f42000 snd_timer 19588 2 snd_seq,snd_pcm, Live 0xf8d2a000 snd_mixer_oss 17152 1 snd_pcm_oss, Live 0xf8d31000 snd 44644 12 snd_intel8x0,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss, Live 0xf8bc1000 uhci_hcd 27664 0 - Live 0xf8d22000 ndiswrapper 69248 0 - Live 0xf8d38000 eepro100 25100 0 - Live 0xf8d1a000 mii 4224 1 eepro100, Live 0xf8bbe000 sbp2 20232 0 - Live 0xf8bb8000 ohci1394 29572 0 - Live 0xf8baf000 ieee1394 88756 2 sbp2,ohci1394, Live 0xf8be6000 usb_storage 92816 0 - Live 0xf8bce000 ehci_hcd 24964 0 - Live 0xf8b82000 usbcore 93280 5 uhci_hcd,usb_storage,ehci_hcd, Live 0xf8b97000 7.4) # cat /proc/ioports 0000-001f : dma1 0020-0021 : pic1 0040-005f : timer 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 03c0-03df : vesafb 03f6-03f6 : ide0 03f8-03ff : serial 0cf8-0cff : PCI conf1 1000-101f : 0000:00:1d.2 1000-101f : uhci_hcd 1040-107f : 0000:00:1f.5 1080-10ff : 0000:00:1f.6 1400-14ff : 0000:00:1f.5 1800-18ff : 0000:00:1f.6 4000-40ff : PCI CardBus #03 4400-44ff : PCI CardBus #03 4800-48ff : PCI CardBus #07 4c00-4cff : PCI CardBus #07 bfa0-bfaf : 0000:00:1f.1 bfa0-bfa7 : ide0 bfa8-bfaf : ide1 cf40-cf7f : 0000:02:08.0 cf40-cf7f : eepro100 d800-d87f : 0000:00:1f.0 d808-d80b : ACPI timer d810-d815 : ACPI CPU throttle eec0-eeff : 0000:00:1f.0 ef80-ef9f : 0000:00:1d.1 ef80-ef9f : uhci_hcd efe0-efff : 0000:00:1d.0 efe0-efff : uhci_hcd # cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cffff : Video ROM 000e0000-000eedff : reserved 000eee00-000eefff : ACPI Non-volatile Storage 000f0000-000fffff : System ROM 00100000-3ffbffff : System RAM 00100000-0031df3c : Kernel code 0031df3d-003f957f : Kernel data 3ffc0000-3ffcffff : reserved 3ffd0000-3ffdffff : ACPI Tables 3ffe0000-3fffffff : reserved 40000000-400003ff : 0000:00:1d.7 40000000-400003ff : ehci_hcd 40000400-400007ff : 0000:00:1f.1 40000800-400009ff : 0000:00:1f.5 40000800-400009ff : Intel 82801DB-ICH4 - AC'97 40000a00-40000aff : 0000:00:1f.5 40000a00-40000aff : Intel 82801DB-ICH4 - Controller 40000c00-40000dff : 0000:02:0d.0 40001000-40001fff : 0000:02:0b.0 40001000-40001fff : yenta_socket 40002000-40002fff : 0000:02:0b.1 40002000-40002fff : yenta_socket 40400000-407fffff : PCI CardBus #03 40800000-40bfffff : PCI CardBus #03 40c00000-40ffffff : PCI CardBus #07 41000000-413fffff : PCI CardBus #07 d0000000-dfffffff : PCI Bus #01 d0000000-dfffffff : 0000:01:00.0 d0000000-d02fffff : vesafb e0000000-efffffff : 0000:00:00.0 fcefe000-fcefefff : 0000:02:08.0 fcefe000-fcefefff : eepro100 fceff000-fcefffff : 0000:02:05.0 fceff000-fcefffff : w22n51.sys fd000000-fdffffff : PCI Bus #01 fd000000-fdffffff : 0000:01:00.0 feda0000-fedbffff : reserved ffb00000-ffbfffff : reserved ffe80000-ffffffff : reserved 7.5) # lspci -vvv 0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 21) Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Reset- FastB2B- 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Region 1: I/O ports at Region 2: I/O ports at Region 3: I/O ports at Region 4: I/O ports at bfa0 [size=16] Region 5: Memory at 40000400 (32-bit, non-prefetchable) [size=1K] 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) Subsystem: Toshiba America Info Systems: Unknown device 0246 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:02:0b.1 CardBus bridge: Toshiba America Info Systems ToPIC95 PCI to Cardbus Bridge with ZV Support (rev 32) Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 0000:02:0d.0 System peripheral: Toshiba America Info Systems SD TypA Controller (rev 03) Subsystem: Toshiba America Info Systems: Unknown device 0001 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 0001) Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio hda: HTS548040M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 PCI: Enabling device 0000:02:0b.0 (0000 -> 0002) Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001] irq 11: nobody cared! [] __report_bad_irq+0x2a/0x8b [] note_interrupt+0x6f/0x9f [] do_IRQ+0xdd/0xdf [] common_interrupt+0x18/0x20 [] get_monspecs+0x27/0x180 [] __do_softirq+0x2f/0x80 [] do_softirq+0x26/0x28 [] do_IRQ+0xc4/0xdf [] common_interrupt+0x18/0x20 [] setup_irq+0x69/0xaa [] yenta_interrupt+0x0/0x39 [] request_irq+0x7c/0xbe [] yenta_allocate_resources+0x6b/0x73 [] yenta_probe+0x14d/0x22f [] yenta_interrupt+0x0/0x39 [] pci_device_probe_static+0x52/0x61 [] __pci_device_probe+0x3b/0x4e [] pci_device_probe+0x2c/0x4a [] bus_match+0x3f/0x6a [] driver_attach+0x56/0x80 [] bus_add_driver+0x91/0xa3 [] driver_register+0x2f/0x33 [] register_sysctl_table+0x68/0x8f [] pci_register_driver+0x5c/0x84 [] yenta_socket_init+0xf/0x13 [] do_initcalls+0x28/0xb4 [] init_workqueues+0x17/0x31 [] init+0x0/0x101 [] init+0x2a/0x101 [] kernel_thread_helper+0x0/0xb [] kernel_thread_helper+0x5/0xb handlers: [] (yenta_interrupt+0x0/0x39) Disabling IRQ #11 Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000007 PCI: Enabling device 0000:02:0b.1 (0000 -> 0002) Yenta: CardBus bridge found at 0000:02:0b.1 [1179:0001] Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000007 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino: found "Intel(R) Pentium(R) M processor 1400MHz": max frequency: 1400000kHz p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available ACPI: (supports S0 S3 S4 S4bios S5) RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 172k freed usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem f8b7a000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. sbp2: $Rev: 1219 $ Ben Collins ReiserFS: hda4: found reiserfs format "3.6" with standard journal ReiserFS: hda4: using ordered data mode ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda4: checking transaction log (hda4) ReiserFS: hda4: Using r5 hash to sort names Adding 987988k swap on /dev/hda3. Priority:-1 extents:1 # cat dmesg_from_shutdown.log Linux version 2.6.7 (root@dmlb2004) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #1 Wed Jun 16 12:02:14 PDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved) BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS) BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) BIOS-e820: 000000003ffc0000 - 000000003ffd0000 (reserved) BIOS-e820: 000000003ffd0000 - 000000003ffe0000 (ACPI data) BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 TOSHIB ) @ 0x000f01b0 ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x3ffd0000 ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @ 0x3ffd005c ACPI: SSDT (v001 TOSHIB A000B 0x20031217 MSFT 0x0100000e) @ 0x3ffd6af2 ACPI: DBGP (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x3ffd00e0 ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x3ffd0034 ACPI: DSDT (v001 TOSHIB A000B 0x20031217 MSFT 0x0100000e) @ 0x00000000 Built 1 zonelists Kernel command line: root=/dev/ram0 real_root=/dev/hda4 init=/linuxrc vga=0x317 splash=verbose Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1396.648 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 904628k/917504k available (2167k kernel code, 12092k reserved, 877k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2760.70 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1396.0281 MHz. ..... host bus clock speed is 99.0734 MHz. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1305k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd67c, last bus=5 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs *10) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [PFAN] (off) Linux Plug and Play Support v0.97 (c) Adam Belay Toshiba System Managment Mode driver v1.11 26/9/2001 SCSI subsystem initialized Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 PCI: Using ACPI for IRQ routing vesafb: framebuffer at 0xd0000000, mapped to 0xf880c000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:c010 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Simple Boot Flag at 0x7c set to 0x1 Machine check exception polling timer started. gx-suspmod: error: no MediaGX/Geode processor found! apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) apm: overridden by ACPI. devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 udf: registering filesystem Initializing Cryptographic API ACPI: AC Adapter [ADP1] (on-line) ACPI: Battery Slot [BAT1] (battery present) ACPI: Battery Slot [BAT2] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Fan [FAN] (off) ACPI: Processor [CPU0] (supports C1 C2 C3) ACPI: Thermal Zone [THRM] (65 C) toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18 toshiba_acpi: HCI method: \_SB_.VALZ.GHCI Console: switching to colour frame buffer device 128x48 Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 hw_random hardware driver 1.0.0 loaded Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ICH4: chipset revision 3 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio hda: HTS548040M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 PCI: Enabling device 0000:02:0b.0 (0000 -> 0002) Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001] Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000007 PCI: Enabling device 0000:02:0b.1 (0000 -> 0002) Yenta: CardBus bridge found at 0000:02:0b.1 [1179:0001] Yenta: ISA IRQ mask 0x00b8, PCI irq 11 Socket status: 30000007 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino: found "Intel(R) Pentium(R) M processor 1400MHz": max frequency: 1400000kHz p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available ACPI: (supports S0 S3 S4 S4bios S5) RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 172k freed usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 11, pci mem f8b7a000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. sbp2: $Rev: 1219 $ Ben Collins ReiserFS: hda4: found reiserfs format "3.6" with standard journal ReiserFS: hda4: using ordered data mode ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda4: checking transaction log (hda4) ReiserFS: hda4: replayed 3 transactions in 0 seconds ReiserFS: hda4: Using r5 hash to sort names Adding 987988k swap on /dev/hda3. Priority:-1 extents:1 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:08:0D:F9:3E:DD, I/O at 0xcf40, IRQ 11. Board assembly ffffff-255, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). ndiswrapper version 0.8 loaded ndiswrapper adding w22n51.sys wlan0: ndiswrapper ethernet device 00:0e:35:1c:d5:5e using driver w22n51.sys USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 11, io base 0000efe0 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 11, io base 0000ef80 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Enabling device 0000:00:1d.2 (0000 -> 0001) uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 11, io base 00001000 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Enabling device 0000:00:1f.5 (0000 -> 0003) PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49416 usecs intel8x0: clocking to 48000 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x1e0-0x1e7 0x370-0x377 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. wlan0: getting configuration failed (C0000001) wlan0: setting tx_power failed (C00000BB) wlan0: removing wep key 0 failed (C0000001) NET: Registered protocol family 23 0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004 Linux agpgart interface v0.100 (c) Dave Jones 0: NVRM: AGPGART: unable to retrieve symbol table # gzcat /proc/config.gz # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_CLEAN_COMPILE=y CONFIG_STANDALONE=y CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_HOTPLUG=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set CONFIG_MPENTIUM4=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set CONFIG_X86_GENERIC=y CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y # CONFIG_SMP is not set # CONFIG_PREEMPT is not set CONFIG_X86_UP_APIC=y # CONFIG_X86_UP_IOAPIC is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y CONFIG_X86_MCE_P4THERMAL=y CONFIG_TOSHIBA=y # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set # CONFIG_REGPARM is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set CONFIG_ACPI_TOSHIBA=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set # # APM (Advanced Power Management) BIOS Support # CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set # CONFIG_APM_DO_ENABLE is not set # CONFIG_APM_CPU_IDLE is not set # CONFIG_APM_DISPLAY_BLANK is not set # CONFIG_APM_RTC_IS_GMT is not set # CONFIG_APM_ALLOW_INTS is not set # CONFIG_APM_REAL_MODE_POWER_OFF is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y # CONFIG_CPU_FREQ_PROC_INTF is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_24_API is not set CONFIG_CPU_FREQ_TABLE=y # # CPUFreq processor drivers # CONFIG_X86_ACPI_CPUFREQ=y # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set CONFIG_X86_POWERNOW_K6=y CONFIG_X86_POWERNOW_K7=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_GX_SUSPMOD=y CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y # CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI is not set CONFIG_X86_SPEEDSTEP_ICH=y CONFIG_X86_SPEEDSTEP_SMI=y CONFIG_X86_P4_CLOCKMOD=y CONFIG_X86_SPEEDSTEP_LIB=y # CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set CONFIG_X86_LONGRUN=y CONFIG_X86_LONGHAUL=y # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y CONFIG_ISA=y # CONFIG_EISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set # # PCMCIA/CardBus support # CONFIG_PCMCIA=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_YENTA=y CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set CONFIG_PCMCIA_PROBE=y # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # CONFIG_FW_LOADER=m # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_PC_CML1=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set CONFIG_PARPORT_PC_SUPERIO=y # CONFIG_PARPORT_PC_PCMCIA is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_CARMEL is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_INITRD=y CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_ADMA=y CONFIG_BLK_DEV_AEC62XX=y CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set CONFIG_BLK_DEV_HPT34X=y # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set CONFIG_BLK_DEV_PDC202XX_OLD=y # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_PDC202XX_FORCE is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set CONFIG_BLK_DEV_SIS5513=y CONFIG_BLK_DEV_SLC90E66=y CONFIG_BLK_DEV_TRM290=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_ARM is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI Transport Attributes # CONFIG_SCSI_SPI_ATTRS=m # CONFIG_SCSI_FC_ATTRS is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set CONFIG_AIC7XXX_DEBUG_ENABLE=y CONFIG_AIC7XXX_DEBUG_MASK=0 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y CONFIG_SCSI_AIC7XXX_OLD=m CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_BUILD_FIRMWARE is not set # CONFIG_AIC79XX_ENABLE_RD_STRM is not set CONFIG_AIC79XX_DEBUG_ENABLE=y CONFIG_AIC79XX_DEBUG_MASK=0 CONFIG_AIC79XX_REG_PRETTY_PRINT=y # CONFIG_SCSI_DPT_I2O is not set CONFIG_SCSI_ADVANSYS=m # CONFIG_SCSI_IN2000 is not set CONFIG_SCSI_MEGARAID=m CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_SVW=m CONFIG_SCSI_ATA_PIIX=m CONFIG_SCSI_SATA_PROMISE=m # CONFIG_SCSI_SATA_SX4 is not set CONFIG_SCSI_SATA_SIL=m # CONFIG_SCSI_SATA_SIS is not set CONFIG_SCSI_SATA_VIA=m # CONFIG_SCSI_SATA_VITESSE is not set # CONFIG_SCSI_BUSLOGIC is not set CONFIG_SCSI_DMX3191D=y CONFIG_SCSI_DTC3280=m CONFIG_SCSI_EATA=m # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_EATA_PIO=m CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_GENERIC_NCR5380=m CONFIG_SCSI_GENERIC_NCR5380_MMIO=m # CONFIG_SCSI_GENERIC_NCR53C400 is not set CONFIG_SCSI_IPS=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_NCR53C406A=m CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA2XXX=y # CONFIG_SCSI_QLA21XX is not set # CONFIG_SCSI_QLA22XX is not set # CONFIG_SCSI_QLA2300 is not set # CONFIG_SCSI_QLA2322 is not set # CONFIG_SCSI_QLA6312 is not set # CONFIG_SCSI_QLA6322 is not set CONFIG_SCSI_SYM53C416=m CONFIG_SCSI_DC395x=m CONFIG_SCSI_DC390T=m # CONFIG_SCSI_T128 is not set CONFIG_SCSI_U14_34F=m # CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # PCMCIA SCSI adapter support # # CONFIG_PCMCIA_AHA152X is not set # CONFIG_PCMCIA_FDOMAIN is not set # CONFIG_PCMCIA_NINJA_SCSI is not set # CONFIG_PCMCIA_QLOGIC is not set # CONFIG_PCMCIA_SYM53C500 is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID5=m # CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=m CONFIG_BLK_DEV_DM=m # CONFIG_DM_CRYPT is not set # # Fusion MPT device support # CONFIG_FUSION=m CONFIG_FUSION_MAX_SGE=40 CONFIG_FUSION_ISENSE=m CONFIG_FUSION_CTL=m # # IEEE 1394 (FireWire) support # CONFIG_IEEE1394=m # # Subsystem Options # # CONFIG_IEEE1394_VERBOSEDEBUG is not set # CONFIG_IEEE1394_OUI_DB is not set # CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set # # Device Drivers # # # Texas Instruments PCILynx requires I2C # CONFIG_IEEE1394_OHCI1394=m # # Protocol Drivers # # CONFIG_IEEE1394_VIDEO1394 is not set CONFIG_IEEE1394_SBP2=m # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m CONFIG_IEEE1394_CMP=m CONFIG_IEEE1394_AMDTP=m # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # # SCTP Configuration (EXPERIMENTAL) # # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_HAMRADIO is not set CONFIG_IRDA=m # # IrDA protocols # CONFIG_IRLAN=m CONFIG_IRNET=m CONFIG_IRCOMM=m CONFIG_IRDA_ULTRA=y # # IrDA options # # CONFIG_IRDA_CACHE_LAST_LSAP is not set # CONFIG_IRDA_FAST_RR is not set # CONFIG_IRDA_DEBUG is not set # # Infrared-port device drivers # # # SIR device drivers # # CONFIG_IRTTY_SIR is not set # # Dongle support # # # Old SIR device drivers # # CONFIG_IRPORT_SIR is not set # # Old Serial dongle support # # # FIR device drivers # CONFIG_USB_IRDA=m CONFIG_SIGMATEL_FIR=m CONFIG_NSC_FIR=m CONFIG_WINBOND_FIR=m CONFIG_TOSHIBA_FIR=m CONFIG_SMC_IRCC_FIR=m CONFIG_ALI_FIR=m CONFIG_VLSI_FIR=m CONFIG_VIA_FIR=m # CONFIG_BT is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=m # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=m CONFIG_EL2=m CONFIG_ELPLUS=m CONFIG_EL16=m CONFIG_EL3=m CONFIG_3C515=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_LANCE=m CONFIG_NET_VENDOR_SMC=y # CONFIG_WD80x3 is not set # CONFIG_ULTRA is not set # CONFIG_SMC9194 is not set # CONFIG_NET_VENDOR_RACAL is not set # # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m # CONFIG_TULIP_MWI is not set # CONFIG_TULIP_MMIO is not set # CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_PCMCIA_XIRCOM=m CONFIG_PCMCIA_XIRTULIP=m # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set CONFIG_HP100=m # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m CONFIG_AMD8111_ETH=m # CONFIG_AMD8111E_NAPI is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set CONFIG_APRICOT=m CONFIG_B44=m CONFIG_FORCEDETH=m # CONFIG_CS89x0 is not set CONFIG_DGRS=m CONFIG_EEPRO100=m CONFIG_EEPRO100_PIO=y CONFIG_E100=m CONFIG_E100_NAPI=y # CONFIG_FEALNX is not set CONFIG_NATSEMI=m CONFIG_NE2K_PCI=m CONFIG_8139CP=m CONFIG_8139TOO=m # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set CONFIG_SIS900=m CONFIG_EPIC100=m CONFIG_SUNDANCE=m # CONFIG_SUNDANCE_MMIO is not set CONFIG_TLAN=m CONFIG_VIA_RHINE=m # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=m # CONFIG_E1000_NAPI is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=m # CONFIG_SK98LIN is not set CONFIG_TIGON3=m # # Ethernet (10000 Mbit) # CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set # CONFIG_S2IO is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # CONFIG_NET_RADIO=y # # Obsolete Wireless cards support (pre-802.11) # CONFIG_STRIP=m CONFIG_ARLAN=m CONFIG_WAVELAN=m CONFIG_PCMCIA_WAVELAN=m CONFIG_PCMCIA_NETWAVE=m # # Wireless 802.11 Frequency Hopping cards support # CONFIG_PCMCIA_RAYCS=m # # Wireless 802.11b ISA/PCI cards support # CONFIG_AIRO=m CONFIG_HERMES=m CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_PCI_HERMES=m CONFIG_ATMEL=m CONFIG_PCI_ATMEL=m # # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m CONFIG_AIRO_CS=m CONFIG_PCMCIA_ATMEL=m CONFIG_PCMCIA_WL3501=m # # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m CONFIG_NET_WIRELESS=y # # PCMCIA network device support # # CONFIG_NET_PCMCIA is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_TSDEV=m CONFIG_INPUT_TSDEV_SCREEN_X=240 CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=m CONFIG_INPUT_EVBUG=m # # Input I/O drivers # CONFIG_GAMEPORT=m CONFIG_SOUND_GAMEPORT=m # CONFIG_GAMEPORT_NS558 is not set # CONFIG_GAMEPORT_L4 is not set # CONFIG_GAMEPORT_EMU10K1 is not set # CONFIG_GAMEPORT_VORTEX is not set # CONFIG_GAMEPORT_FM801 is not set # CONFIG_GAMEPORT_CS461x is not set CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set CONFIG_MOUSE_PC110PAD=m # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_GUNZE=m # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_CS is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_SONYPI=m # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=m CONFIG_AGP_ALI=m CONFIG_AGP_ATI=m CONFIG_AGP_AMD=m CONFIG_AGP_AMD64=m CONFIG_AGP_INTEL=m # CONFIG_AGP_INTEL_MCH is not set CONFIG_AGP_NVIDIA=m CONFIG_AGP_SIS=m CONFIG_AGP_SWORKS=m CONFIG_AGP_VIA=m # CONFIG_AGP_EFFICEON is not set CONFIG_DRM=y CONFIG_DRM_TDFX=m CONFIG_DRM_GAMMA=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # I2C support # # CONFIG_I2C is not set # # Misc devices # # CONFIG_IBM_ASM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_PCI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_RTCTIMER is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # ISA devices # # CONFIG_SND_AD1848 is not set # CONFIG_SND_CS4231 is not set # CONFIG_SND_CS4232 is not set # CONFIG_SND_CS4236 is not set # CONFIG_SND_ES1688 is not set # CONFIG_SND_ES18XX is not set # CONFIG_SND_GUSCLASSIC is not set # CONFIG_SND_GUSEXTREME is not set # CONFIG_SND_GUSMAX is not set # CONFIG_SND_INTERWAVE is not set # CONFIG_SND_INTERWAVE_STB is not set # CONFIG_SND_OPTI92X_AD1848 is not set # CONFIG_SND_OPTI92X_CS4231 is not set # CONFIG_SND_OPTI93X is not set # CONFIG_SND_SB8 is not set # CONFIG_SND_SB16 is not set # CONFIG_SND_SBAWE is not set # CONFIG_SND_WAVEFRONT is not set # CONFIG_SND_CMI8330 is not set # CONFIG_SND_OPL3SA2 is not set # CONFIG_SND_SGALAXY is not set # CONFIG_SND_SSCAPE is not set # # PCI devices # CONFIG_SND_AC97_CODEC=m CONFIG_SND_ALI5451=m # CONFIG_SND_ATIIXP is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set CONFIG_SND_AZT3328=m # CONFIG_SND_BT87X is not set CONFIG_SND_CS46XX=m # CONFIG_SND_CS46XX_NEW_DSP is not set CONFIG_SND_CS4281=m CONFIG_SND_EMU10K1=m # CONFIG_SND_KORG1212 is not set # CONFIG_SND_MIXART is not set CONFIG_SND_NM256=m # CONFIG_SND_RME32 is not set CONFIG_SND_RME96=m # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set CONFIG_SND_TRIDENT=m CONFIG_SND_YMFPCI=m CONFIG_SND_ALS4000=m CONFIG_SND_CMIPCI=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m # CONFIG_SND_SONICVIBES is not set CONFIG_SND_VIA82XX=m # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # PCMCIA devices # # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_VXP440 is not set # CONFIG_SND_PDAUDIOCF is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=m # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=m # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_HP8200e=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # # USB Human Interface Devices (HID) # CONFIG_USB_HID=m CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_TEST is not set # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_REISERFS_PROC_INFO=y # CONFIG_REISERFS_FS_XATTR is not set CONFIG_JFS_FS=y # CONFIG_JFS_POSIX_ACL is not set # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_NTFS_FS=m CONFIG_NTFS_DEBUG=y CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_DEVFS_FS=y # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS_XATTR=y CONFIG_DEVPTS_FS_SECURITY=y CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_EXPORTFS is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_FRAME_POINTER is not set # CONFIG_4KSTACKS is not set CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_ARC4 is not set CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Library routines # CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_X86_STD_RESOURCES=y CONFIG_PC=y P.S. Honestly I don't know if you can help me with this but I don't know really where to turn. --EXCITEBOUNDARY_000__720712cbacb740e3123859f2aebf11b1-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/