Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S266189AbUIAMjv (ORCPT ); Wed, 1 Sep 2004 08:39:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S266319AbUIAMjv (ORCPT ); Wed, 1 Sep 2004 08:39:51 -0400 Received: from smtp001.mail.ukl.yahoo.com ([217.12.11.32]:49059 "HELO smtp001.mail.ukl.yahoo.com") by vger.kernel.org with SMTP id S266189AbUIAMjQ convert rfc822-to-8bit (ORCPT ); Wed, 1 Sep 2004 08:39:16 -0400 From: Romain Moyne To: linux-kernel@vger.kernel.org Subject: Re: Time runs exactly three times too fast Date: Thu, 2 Sep 2004 17:08:30 +0200 User-Agent: KMail/1.7 References: <200409021453.09730.aero_climb@yahoo.fr> <200409021614.10377.aero_climb@yahoo.fr> In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT Content-Disposition: inline Message-Id: <200409021708.31410.aero_climb@yahoo.fr> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12012 Lines: 240 Le Mercredi 01 Septembre 2004 14:35, Zwane Mwaikambo a ?crit?: > On Thu, 2 Sep 2004, Romain Moyne wrote: > > presario:/etc/rc2.d# ls > > S10sysklogd S20alsa S20makedev S20xprint S99kdm S99xdm > > S11klogd S20exim4 S20pcmcia S89atd S99rmnologin > > S14ppp S20inetd S20xfs S89cron S99stop-bootlogd > > presario:/etc/rc2.d# > > Please send a dmesg and .config presario:/sys/devices/system/cpu/cpu0# dmesg Linux version 2.6.9-rc1 (root@presario) (version gcc 3.3.4 (Debian 1:3.3.4-9)) #1 Thu Sep 2 14:52:15 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff70000 (usable) BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data) BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 130928 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126832 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f7280 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff7a89f ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @ 0x1ff7ee34 ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @ 0x1ff7eea8 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff7ef02 ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1ff7ef2a ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x00000000 Built 1 zonelists Kernel command line: root=/dev/hda3 ro Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 266.119 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514768k/523712k available (1923k kernel code, 8176k reserved, 1004k data, 120k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 517.12 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 078bfbff c1d3fbff 00000000 00000000 CPU: After vendor identify, caps: 078bfbff c1d3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 078bfbff c1d3fbff 00000000 00000010 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP Processor 3000+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040715 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC0] (gpe 33) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUS0] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUS1] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUS2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LPID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [LSMB] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:06.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:04.1[B] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Cannot allocate resource region 4 of device 0000:00:01.1 PCI: Cannot allocate resource region 5 of device 0000:00:01.1 get_random_bytes called before random driver initialization Simple Boot Flag at 0x37 set to 0x1 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ACPI: PCI interrupt 0000:00:06.1[B] -> GSI 10 (level, low) -> IRQ 10 loop: loaded (max 8 devices) Using anticipatory io scheduler nbd: registered device at major 43 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) 8139cp: pci dev 0000:02:01.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.27 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 10 (level, low) -> IRQ 10 eth0: RealTek RTL8139 at 0xe080e800, 00:0f:b0:08:29:0a, IRQ 10 eth0: Identified 8139 chip type 'RTL-8101' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-150: IDE controller at PCI slot 0000:00:08.0 NFORCE3-150: chipset revision 165 NFORCE3-150: not 100% native mode: will probe irqs later NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N060ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HL-DT-ST DVD+RW GCA-4040N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker i8042.c: Detected active multiplexing controller, rev 1.9. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 120k freed NET: Registered protocol family 1 Adding 498004k swap on /dev/hda2. Priority:-1 extents:1 SCSI subsystem initialized sbp2: $Rev: 1219 $ Ben Collins usbcore: registered new driver usbfs usbcore: registered new driver hub ndiswrapper version 0.10 loaded (preempt=yes,smp=no) ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ndiswrapper: using irq 11 wlan0: ndiswrapper ethernet device 00:90:4b:59:c5:c4 using driver bcmwl5.sys ndiswrapper device wlan0 supports WPA with TKIP cipher ndiswrapper: driver bcmwl5.sys (Broadcom,10/28/2003, 3.40.25.3) added kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10 ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 USB 2.0 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: irq 10, pci mem e08c6000 ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: control timeout on ep0out Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: Setting up Nforce3 AGP. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xe8000000 ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:02.0: nVidia Corporation nForce3 USB 1.1 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 11, pci mem e08c8000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 10 (level, low) -> IRQ 10 ohci_hcd 0000:00:02.1: nVidia Corporation nForce3 USB 1.1 (#2) PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: irq 10, pci mem e0935000 ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected usb 2-1: new low speed USB device using address 2 input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse? 1.0A] on usb-0000:00:02.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver ts: Compaq touchscreen protocol output ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:06.0 to 64 intel8x0_measure_ac97_clock: measured 48658 usecs intel8x0: measured clock 16605 rejected intel8x0: clocking to 48000 My config file is in my first message :) >Do you have files in /sys/devices/system/cpu/cpu0/cpufreq ? I don't. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/