Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S268634AbUIGVqm (ORCPT ); Tue, 7 Sep 2004 17:46:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S268662AbUIGVk6 (ORCPT ); Tue, 7 Sep 2004 17:40:58 -0400 Received: from s2.ukfsn.org ([217.158.120.143]:15763 "EHLO mail.ukfsn.org") by vger.kernel.org with ESMTP id S268261AbUIGVfT (ORCPT ); Tue, 7 Sep 2004 17:35:19 -0400 Message-ID: <413E2990.8020108@dgreaves.com> Date: Tue, 07 Sep 2004 22:35:12 +0100 From: David Greaves User-Agent: Mozilla Thunderbird 0.7.3 (X11/20040830) X-Accept-Language: en-us, en MIME-Version: 1.0 To: Neil Brown , "'linux-kernel@vger.kernel.org'" Cc: Sebastian Utz , linux-raid@vger.kernel.org Subject: Re: Software RAID-5 attempt to access beyond end of device... References: <1093621033.13979.49.camel@slurp> <16690.51386.426771.284290@cse.unsw.edu.au> In-Reply-To: <16690.51386.426771.284290@cse.unsw.edu.au> X-Enigmail-Version: 0.85.0.0 X-Enigmail-Supports: pgp-inline, pgp-mime Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19128 Lines: 472 I have had this problem too so cc'ing lkml as Neil suggests. my oops and dmesg at the end. The reiserfs is on top of an lvm2 on top of a raid5 I tried booting with 2.6.6 and then 2.6.7 David Neil Brown wrote: >On Friday August 27, su@rotamente.com wrote: > > >>Hello, >> >>I have a problem with an Software RAID-5 at the top of 4 IDE-Drives >>connected via 2 Promise UltraTX2 (20268) IDE controller. >> >> > >This is not a raid problem. It is a problem with your filesystem or >your hardware. >I think you have reported this for both reiserfs and ext3, in which >can it is unlikely to be the filesystem. I guess it could be in the >generic block layer... > > > >>FS is EXT3. >>Kernel 2.6.8.1 (problem occured with 2.6.7, update didn't helped) >>CPU: Pentium II 400 >>Mainboard: Asus P2B-S >> >>After 29% usage, I've got an Kernel oops and system stalls: >>-------- snip start ------------- >>Aug 27 16:30:18 gharb kernel: attempt to access beyond end of device >>Aug 27 16:30:18 gharb kernel: md0: rw=1, want=6917529027856096120, >>limit=241215360 >> >> > >6917529027856096120 is 600000000CD0DB78 in hex. >0xCD0DB78 is 215014264 which is not beyond the end of the device. >It looks like 2 extra bits have been set at the top of the address. >This could be due to bad memory (though that is more commonly a >single-bit error, not a double bit error), or it could be the >filesystem send a bad request, possibly due to bad indexing >information that has previously been stored on disk. > >I recommend running memtest for a while and confirming that it isn't a >hardware error, and then possibly following up on >linux-kernel@vger.kernel.org. > > >NeilBrown > >- >To unsubscribe from this list: send the line "unsubscribe linux-raid" in >the body of a message to majordomo@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html > > > Hi I first got this oops 'out of the blue' Memtest seems to run fine When rebooting and remounting, it now oopses every time I remount the fs (I'm running reiserfsck --fix-fixable now.) ################################ First Oops: Sep 7 20:32:04 cu kernel: attempt to access beyond end of device Sep 7 20:32:04 cu kernel: dm-0: rw=0, want=1423563552, limit=1153433600 Sep 7 20:32:04 cu kernel: Buffer I/O error on device dm-0, logical block 2862300003 Sep 7 20:45:02 cu kernel: nfs warning: mount version older than kernel Sep 7 20:45:02 cu last message repeated 4 times Sep 7 20:56:33 cu kernel: Unable to handle kernel NULL pointer dereference at virtual address 000006d8 Sep 7 20:56:33 cu kernel: printing eip: Sep 7 20:56:33 cu kernel: c01955fd Sep 7 20:56:33 cu kernel: *pde = 00000000 Sep 7 20:56:33 cu kernel: Oops: 0002 [#1] Sep 7 20:56:33 cu kernel: CPU: 0 Sep 7 20:56:33 cu kernel: EIP: 0060:[set_bit_in_list_bitmap+61/112] Not tainted Sep 7 20:56:33 cu kernel: EFLAGS: 00010286 (2.6.6) Sep 7 20:56:33 cu kernel: EIP is at set_bit_in_list_bitmap+0x3d/0x70 Sep 7 20:56:33 cu kernel: eax: 00000000 ebx: 0001ca42 ecx: cec11200 edx: d1201918 Sep 7 20:56:33 cu kernel: esi: 000036d4 edi: d112d104 ebp: 00000000 esp: cfe11a5c Sep 7 20:56:33 cu kernel: ds: 007b es: 007b ss: 0068 Sep 7 20:56:33 cu kernel: Process kswapd0 (pid: 8, threadinfo=cfe10000 task=cfe16b70) Sep 7 20:56:33 cu kernel: Stack: d112d10c d112d10c e52136d4 cec11200 c019a43b cec11200 e52136d4 d112d104 Sep 7 20:56:33 cu kernel: c0174b2a cfe11de4 e52136d4 c573165c cfe10000 c0174b65 cfe11de4 cec11200 Sep 7 20:56:33 cu kernel: e52136d4 e52136d4 00000268 c0191e74 cfe11de4 e52136d4 cf17e330 c04be980 Sep 7 20:56:33 cu kernel: Call Trace: Sep 7 20:56:33 cu kernel: [journal_mark_freed+155/512] journal_mark_freed+0x9b/0x200 Sep 7 20:56:33 cu kernel: [_reiserfs_free_block+314/336] _reiserfs_free_block+0x13a/0x150 Sep 7 20:56:33 cu kernel: [reiserfs_free_block+37/64] reiserfs_free_block+0x25/0x40 Sep 7 20:56:33 cu kernel: [prepare_for_delete_or_cut+1380/1920] prepare_for_delete_or_cut+0x564/0x780 Sep 7 20:56:33 cu kernel: [ata_scsi_translate+173/240] ata_scsi_translate+0xad/0xf0 Sep 7 20:56:33 cu kernel: [reiserfs_cut_from_item+191/1248] reiserfs_cut_from_item+0xbf/0x4e0 Sep 7 20:56:33 cu kernel: [reiserfs_do_truncate+606/1328] reiserfs_do_truncate+0x25e/0x530 Sep 7 20:56:33 cu kernel: [reiserfs_delete_object+61/112] reiserfs_delete_object+0x3d/0x70 Sep 7 20:56:33 cu kernel: [reiserfs_delete_inode+130/192] reiserfs_delete_inode+0x82/0xc0 Sep 7 20:56:33 cu kernel: [reiserfs_delete_inode+0/192] reiserfs_delete_inode+0x0/0xc0 Sep 7 20:56:33 cu kernel: [generic_delete_inode+81/208] generic_delete_inode+0x51/0xd0 Sep 7 20:56:33 cu kernel: [iput+85/128] iput+0x55/0x80 Sep 7 20:56:33 cu kernel: [prune_dcache+249/304] prune_dcache+0xf9/0x130 Sep 7 20:56:33 cu kernel: [shrink_dcache_memory+35/48] shrink_dcache_memory+0x23/0x30 Sep 7 20:56:33 cu kernel: [shrink_slab+288/368] shrink_slab+0x120/0x170 Sep 7 20:56:33 cu kernel: [balance_pgdat+513/624] balance_pgdat+0x201/0x270 Sep 7 20:56:33 cu kernel: [kswapd+279/304] kswapd+0x117/0x130 Sep 7 20:56:33 cu kernel: [autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50 Sep 7 20:56:33 cu kernel: [autoremove_wake_function+0/80] autoremove_wake_function+0x0/0x50 Sep 7 20:56:33 cu kernel: [kswapd+0/304] kswapd+0x0/0x130 Sep 7 20:56:33 cu kernel: [kernel_thread_helper+5/20] kernel_thread_helper+0x5/0x14 Sep 7 20:56:33 cu kernel: Sep 7 20:56:33 cu kernel: Code: 0f ab 30 8b 7c 24 0c 8b 5c 24 04 8b 74 24 08 31 c0 83 c4 10 ################################ reboot, mount filesystem, oops: ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names ReiserFS: dm-0: Removing [243 454 0x0 SD]..<4>ReiserFS: dm-0: warning: vs-4075: reiserfs_free_block: block 3844159188 is out of range on dm-0 Unable to handle kernel paging request at virtual address 379df56e printing eip: c019907a *pde = 00000000 Oops: 0000 [#1] Modules linked in: ipv6 e1000 usblp uhci_hcd usbcore ext3 jbd mbcache nfsd exportfs lockd sunrpc unix CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010206 (2.6.7) EIP is at set_bit_in_list_bitmap+0x3a/0x70 eax: 379df56a ebx: 000134e8 ecx: cffc3e00 edx: 379df56a esi: 000044a7 edi: d115e0e4 ebp: 00000000 esp: cda71968 ds: 007b es: 007b ss: 0068 Process mount (pid: 1143, threadinfo=cda70000 task=cf867130) Stack: c03367e1 d115e10c 9a7444a7 cffc3e00 c019df2b cffc3e00 9a7444a7 d115e0e4 c042b1a0 cda71d08 9a7444a7 00000001 cd0e0c8c c0177035 cda71d08 cffc3e00 9a7444a7 00000000 cda71d08 00000269 cd049658 cda70000 c01953ce cda71d08 Call Trace: [] journal_mark_freed+0x9b/0x200 [] reiserfs_free_block+0x35/0x60 [] prepare_for_delete_or_cut+0x58e/0x7a0 [] scsi_done+0x0/0x70 [] reiserfs_cut_from_item+0xbf/0x560 [] reiserfs_do_truncate+0x260/0x570 [] reiserfs_delete_object+0x3d/0x70 [] reiserfs_delete_inode+0x82/0xc0 [] printk+0x100/0x140 [] reiserfs_delete_inode+0x0/0xc0 [] generic_delete_inode+0x51/0xd0 [] iput+0x55/0x80 [] finish_unfinished+0x1e7/0x350 [] reiserfs_fill_super+0x532/0x6e0 [] reiserfs_init_locked_inode+0x0/0x20 [] disk_name+0xa9/0xb0 [] sb_set_blocksize+0x25/0x60 [] get_sb_bdev+0x11d/0x150 [] get_super_block+0x2f/0x70 [] reiserfs_fill_super+0x0/0x6e0 [] do_kern_mount+0x5f/0xe0 [] do_add_mount+0x78/0x170 [] do_mount+0x144/0x190 [] copy_mount_options+0x63/0xc0 [] sys_mount+0xa0/0xf0 [] syscall_call+0x7/0xb Code: 8b 40 04 0f ab 30 8b 7c 24 0c 8b 5c 24 04 8b 74 24 08 31 c0 ################################ dmesg: Linux version 2.6.7 (root@cu.dgreaves.com) (gcc version 3.3.3 (Debian 20040422)) #1 Wed Jun 16 12:39:51 BST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffec000 (usable) BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data) BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. On node 0 totalpages: 65516 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61420 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f6900 ACPI: RSDT (v001 ASUS A7V-133 0x30303031 MSFT 0x31313031) @ 0x0ffec000 ACPI: FADT (v001 ASUS A7V-133 0x30303031 MSFT 0x31313031) @ 0x0ffec080 ACPI: BOOT (v001 ASUS A7V-133 0x30303031 MSFT 0x31313031) @ 0x0ffec040 ACPI: DSDT (v001 ASUS A7V-133 0x00001000 MSFT 0x0100000b) @ 0x00000000 Built 1 zonelists Kernel command line: root=/dev/hda2 ro single Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1276.141 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 255892k/262064k available (2095k kernel code, 5440k reserved, 889k data, 160k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 2506.75 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1275.0740 MHz. ..... host bus clock speed is 268.0576 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1150, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] SCSI subsystem initialized ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing spurious 8259A interrupt: IRQ7. atyfb: 3D RAGE II+ (GTB) [0x4755 rev 0x9a] 4M EDO, 14.31818 MHz XTAL, 200 MHz PLL, 63 Mhz MCLK fb0: ATY Mach64 frame buffer device on PCI Simple Boot Flag at 0x3a set to 0x1 SGI XFS with ACLs, no debug enabled Applying VIA southbridge workaround. PCI: Disabling Via external APIC routing Console: switching to colour frame buffer device 80x25 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:04.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: ST320420A, ATA DISK drive hdb: Maxtor 5A300J0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Memorex 482E CD-ROM, ATAPI CD/DVD-ROM drive hdd: PLEXTOR CD-R PX-W2410A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39851760 sectors (20404 MB) w/2048KiB Cache, CHS=39535/16/63, UDMA(66) hda: hda1 hda2 hda3 hdb: max request size: 1024KiB hdb: 585940320 sectors (300001 MB) w/2048KiB Cache, CHS=36473/255/63, UDMA(100) hdb: hdb1 hdb2 hdc: ATAPI 48X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33) libata version 1.02 loaded. sata_promise version 1.00 ata1: SATA max UDMA/133 cmd 0xD100D200 ctl 0xD100D238 bmdma 0x0 irq 11 ata2: SATA max UDMA/133 cmd 0xD100D280 ctl 0xD100D2B8 bmdma 0x0 irq 11 ata3: SATA max UDMA/133 cmd 0xD100D300 ctl 0xD100D338 bmdma 0x0 irq 11 ata4: SATA max UDMA/133 cmd 0xD100D380 ctl 0xD100D3B8 bmdma 0x0 irq 11 ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f ata2: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise ata3: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f ata3: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata3: dev 0 configured for UDMA/133 scsi2 : sata_promise ata4: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f ata4: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata4: dev 0 configured for UDMA/133 scsi3 : sata_promise Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdc: drive cache: write back sdc: sdc1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 SCSI device sdd: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdd: drive cache: write back sdd: sdd1 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 1700.000 MB/sec 8regs_prefetch: 1608.000 MB/sec 32regs : 1300.000 MB/sec 32regs_prefetch: 1296.000 MB/sec pII_mmx : 3408.000 MB/sec p5_mmx : 4572.000 MB/sec raid5: using function: p5_mmx (4572.000 MB/sec) raid6: int32x1 503 MB/s raid6: int32x2 671 MB/s raid6: int32x4 441 MB/s raid6: int32x8 402 MB/s raid6: mmxx1 1070 MB/s raid6: mmxx2 1824 MB/s raid6: sse1x1 980 MB/s raid6: sse1x2 1667 MB/s raid6: using algorithm sse1x2 (1667 MB/s) md: raid6 personality registered as nr 8 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: considering sdd1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: adding hdb1 ... md: created md0 md: bind md: bind md: bind md: bind md: bind md: running: raid5: device sdd1 operational as raid disk 3 raid5: device sdc1 operational as raid disk 1 raid5: device sdb1 operational as raid disk 2 raid5: device sda1 operational as raid disk 0 raid5: device hdb1 operational as raid disk 4 raid5: allocated 5222kB for md0 raid5: raid level 5 set md0 active with 5 out of 5 devices, algorithm 2 RAID5 conf printout: --- rd:5 wd:5 fd:0 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdb1 disk 3, o:1, dev:sdd1 disk 4, o:1, dev:hdb1 md: ... autorun DONE. XFS mounting filesystem hda2 Starting XFS recovery on filesystem: hda2 (dev: hda2) Ending XFS recovery on filesystem: hda2 (dev: hda2) VFS: Mounted root (xfs filesystem) readonly. Freeing unused kernel memory: 160k freed NET: Registered protocol family 1 Adding 522100k swap on /dev/hda3. Priority:-1 extents:1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:04.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:04.2: irq 4, io base 0000d400 uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:04.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:04.3: irq 4, io base 0000d000 uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using address 2 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/